T63 Datasheet

T63
www.vishay.com
Vishay Sfernice
1/4" Multi-Turn Fully Sealed Container Cermet Trimmer
FEATURES
• 0.25 W at 70 °C
• Industrial grade
• Tests according to CECC 41000 or IEC 60393-1
• Multi-turn operation
• Low contact resistance variation 1 % typical
Due to their square shape and small size (6.8 mm x 6.8 mm
x 5 mm), the multi-turn trimmers of the T63 series are ideally
suited for PCB use, enabling high density board mounting
with reduced space requirement between cards.
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Six versions are available differing by the top or side position
of the adjustment screw and by PC pins configuration.
The use of cermet for the resistive track ensures an excellent
stability of nominal specifications throughout life.
DIMENSIONS in millimeters (± 0.5 mm)
Terminal Spacing on a 2.54 PCB
T63XA
6.8 ± 0.2 4 min.
Ø 0.45
2.54
2.54
Screwdriver slot
0.5 x 0.5
2.3 ± 0.2
5 max.
a
b
c
0.25
6.8 ± 0.2
0.7
Ø 1.8
a
b
c
1 ± 0.1
5.7 ± 0.1
T63XB
6.8 ± 0.2 4 min.
1.2 ± 0.3
5 max.
2.54
2.54
a
b
c
0.25
6.8 ± 0.2
2.54
Screwdriver slot
0.5 x 0.5
0.7
Ø 1.8
a
b
c
1 ± 0.1
5.7 ± 0.1
T63YA
7.8 max.
Ø 0.45
5 max.
6.8 ± 0.2 4 min.
1 ± 0.1
2.54
a
b
c
0.25
Ø 1.8
6.8 ± 0.2
2.54
2.3 ± 0.2
T63YB
1.2 ± 0.3
6.8 ± 0.2 4 min.
2.54
2.54
5 max.
1 ± 0.1
a
b
c
0.25
Ø 1.8
6.8 ± 0.2
2.54
T63ZA
1.3 ± 0.1
a
b
c
1.3 ± 0.1
a
b
c
6.8 ± 0.2
c
b
a
6.8 ± 0.2
Ø 1.8
c
b
a
2.54
2.54
1.3 ± 0.1
3.7
1 ± 0.1
T63ZB
6.8 ± 0.2
c
b
a
6.8 ± 0.2
Ø 1.8
2.54
2.54
5 max. 4 min.
c
b
a
2.54 3.7
Revision: 24-Sep-15
Document Number: 51024
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T63
www.vishay.com
Vishay Sfernice
ELECTRICAL SPECIFICATIONS
Resistive element
Cermet
Electrical travel
14 turns ± 2
10  to 2.2 M
Resistance range
Standard series and on request series E3
Tolerance
1 - 2 - 5 (1 - 2.2 - 4.7)
Standard
± 10 %
On request
±5%
Linear
0.25 W at 70 °C
Power rating
POWER IN W
0.25
0
0
25
70
50
125
100
155
AMBIENT TEMPERATURE IN °C
Circuit diagram
Temperature coefficient
Limiting element voltage (linear law)
Contact resistance variation
End resistance (typical)
a
c
(1)
(3)
cw
b
(2)
See Standard Resistance Element table
250 V
2 % Rn or 2 
1
Dielectric strength (RMS)
1000 V
Insulation resistance (500 VDC)
106 M
MECHANICAL SPECIFICATIONS
Mechanical travel
Operating torque (max. Ncm)
End stop torque
15 turns ± 5
1.5
Clutch action
Unit weight (max. g)
0.5
Wiper (actual travel)
Positioned at approx. 50 %
Terminals
Pure Sn (code e3)
ENVIRONMENTAL SPECIFICATIONS
Temperature range
Climatic category
Sealing
Revision: 24-Sep-15
-55 °C to +155 °C
55/125/56
Fully sealed - IP67
Document Number: 51024
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T63
www.vishay.com
Vishay Sfernice
PERFORMANCES
TESTS
CONDITIONS
TYPICAL VALUES AND DRIFTS
RT/RT
R1-2/R1-2
OTHER
Electrical endurance
1000 h at rated power
90'/30' - ambient temperature 70 °C
±1%
±2%
Contact res. variation: < 1 % Rn
Climatic sequence
Phase A dry heat 125 °C - 30 % Pr
Phase B damp heat
Phase C cold -55 °C
Phase D damp heat 5 cycles
± 0.5 %
±1%
-
56 days
40 °C, 93 % RH
± 0.5 %
±1%
Dielectric strength: 1000 VRMS
Insulation resistance: > 104 M
5 cycles
-55 °C to +125 °C
± 0.5 %
-
V1-2/V1-3  ± 1 %
50 g at 11 ms
3 successive shocks
in 3 directions
± 0.1 %
± 0.2 %
-
10 Hz to 55 Hz
0.75 mm or 10 g
during 6 h
± 0.1 %
-
V1-2/V1-3  ± 0.2 %
-
Contact res. variation: < 1 % Rn
Damp heat, steady state
Rapid temperature change
Shock
Vibration
Mechanical endurance
200 cycles
± (2 % + 3 )
Note
• Nothing stated herein shall be construed as a guarantee of quality or durability.
STANDARD RESISTANCE ELEMENT DATA
STANDARD
RESISTANCE
VALUES
LINEAR LAW
MAX.
MAX.
POWER WORKING
AT 70 °C VOLTAGE
MAX.
WIPER
CURRENT
TYPICAL
TCR
-55 °C
+125 °C
ppm/°C

W
V
mA
10
0.25
1.58
158
20
0.25
2.23
112
50
0.25
3.5
77
100
0.25
35
50
200
0.25
7.07
35
500
0.25
11.2
22
1K
0.25
15.8
15.8
2K
0.25
22.3
11.2
5K
0.25
35.3
7.1
10K
0.25
50
5
20K
0.25
70.7
3.5
25K
0.25
79
3.2
50K
0.25
112
2.2
100K
0.25
158
1.6
200K
0.25
224
1.1
250K
0.25
250
1.1
500K
0.13
250
0.5
1M
0.06
250
0.25
2.2M
0.03
250
0.125
Revision: 24-Sep-15
MARKING
•
•
•
•
•
•
•
Vishay trademark
Model
Style
Ohmic value (in , k, M)
Tolerance (in %) only if non standard
Manufacturing date
Marking of terminal 3
PACKAGING
• In tube of 50 pieces code T20 (TU50)
± 100
Document Number: 51024
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T63
www.vishay.com
Vishay Sfernice
ORDERING INFORMATION (part number)
T
6
3
X
A
1
0
4
K
T
2
0
MODEL
STYLE
OHMIC VALUE
TOLERANCE
PACKAGING
T63
XA
XB
YA
YB
ZA
ZB
From
10  to 2.2 M
104 = 100 k
K = 10 %
on request J = 5 %
T20 = tube
50 pieces
SPECIAL
NUMBER
(If applicable)
Given by
Vishay
for custom
design
DESCRIPTION (for information only)
T63
XA
100K
10 %
MODEL
STYLE
VALUE
TOLERANCE
SPECIAL
TU
e3
PACKAGING
LEAD (Pb)-FREE
RELATED DOCUMENTS
APPLICATION NOTES
Potentiometers and Trimmers
www.vishay.com/doc?51001
Guidelines for Vishay Sfernice Resistive and Inductive Components
www.vishay.com/doc?52029
Revision: 24-Sep-15
Document Number: 51024
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000