8 6 7 4 5 3 2 REV STAINLESS STEEL O-RING PANEL MOUNT POWER SUB-D CONNECTOR • DESIGNED FOR PANEL-MOUNT WITH AN O-RING SEAL D SRISD2003 DOCUMENT CHANGE NO. REVISIONS DATE CFG APPROVAL - INIT RLSE 2010-01-22 J. PETRI A DCN000799 3/22/2011 J. PETRI B DCN001540 4/30/2015 Jim Petri 2015.05.27 08:22:05 -04'00' • INCORPORATES BERYLLIUM-COPPER CONTACTS INDIVIDUALLY SEALED USING CERAMAX® PROPRIETARY CERAMIC TO ESTABLISH A DURABLE HERMETIC SEAL. D • THE INTERNAL PINS CONFIGURED TO ACCEPT SOLDERCUPS (P/N 120029-1) FOR WIRE ATTACH. 1. LEAK RATE: LESS THAN OR EQUAL TO 1X10^-9 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. 2. INTERFACE AND MOUNTING HOLES IN ACCORDANCE WITH MIL-DTL-24308/3. 3. MATERIALS: CONTACT: BERYLLIUM-COPPER ALLOY 172/173 IN ACCORDANCE WITH ASTM B196/197. SOLDERCUP ACCEPTS UP TO 12 AWG WIRE. DIELECTRIC: CERAMAX PROPRIETARY CERAMIC. SHELL: STAINLESS STEEL ALLOY 304L IN ACCORDANCE WITH SAE AMS-QQ-S-763. JACKING HARDWARE: 300-SERIES STAINLESS STEEL. O-RING GASKET: FLUOROCARBON RUBBER. B 4. FINISH: CONTACTS: NICKEL PLATE PER AMS QQ-N-290, .000100/ .000250 THICK. GOLD PLATE PER ASTM B488-11, TYPE III, CODE A, .000050/ .000100 THICK. SHELL: PASSIVATED PER QQ-P-35. C 5. RECOMMENDED INSTALLATION TORQUE FOR JACKING HARDWARE: 3-5 LB-IN. C 6. ORDERING INSTRUCTIONS: SPECIFY BASE NUMBER FOLLOWED BY DASH NUMBER INDICATING CONTACT ARRANGEMENT (SEE SHEETS 2-3): EXAMPLE: SRISD2003 - 2W2 B CONTACT ARRANGEMENT (SEE SHEETS 2-3) BASE NUMBER B N±.003 +.005 Y - .002 B B W±.010 10° .423±.020 B X±.010 +.005 Z - .002 B B B SOLDERCUP (P/N 120029-1) 4X R.135±.005 2X ( .142) TYP .118 .003 THRU .234 .063 FROM FARSIDE PANEL CUTOUT DETAIL B TABLE 1 .546 .250 A SHELL INSULATOR CONTACT SHELL SIZE W X Y Z N GASKET SIZE A5-568A 1 1.509 .700 .739 .402 .984 -22 2 1.803 .700 1.067 .402 1.312 -25 3 2.491 .700 1.607 .402 1.852 -30 4 3.080 .700 2.255 .402 2.500 -33 5 3.016 .812 2.152 .514 2.406 -33 UNLESS OTHERWISE SPECIFIED DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE CONNECTOR, SUB-D, POWER, O-RING PANEL MOUNT SIZE DOCUMENT A SCALE FORM 300067 REV - 7 6 5 4 3 (321) 254-4067 WWW.SRIHERMETICS.COM 1:1 2 CAGE CODE SRISD2003 3PJY7 SHEET 1 REV B 1 OF 3 A 8 7 6 5 3 4 SHELL SIZE 1 2 DOCUMENT SRISD2003 B D D SRISD2003-1W1 SRISD2003-5W1 SRISD2003-2W2 SHELL SIZE 2 C C SRISD2003-3W3 SRISD2003-7W2 SRISD2003-11W1 B B SHELL SIZE 3 SRISD2003-5W5 SRISD2003-9W4 SRISD2003-13W3 A A SRISD2003-17W2 DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 63 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRISD2003-21W1 a division of WINCHESTER TITLE CONNECTOR, SUB-D, POWER, O-RING PANEL MOUNT SIZE DOCUMENT A DO NOT SCALE DRAWING FORM 300067 REV A 7 6 5 4 3 (321) 254-4067 www.srihermetics.com SCALE 1:1 2 CAGE CODE SRISD2003 3PJY7 SHEET 1 REV B 2 OF 3 8 7 6 5 3 4 SHELL SIZE 4 2 DOCUMENT SRISD2003 B D D SRISD2003-8W8 SRISD2003-13W6 SRISD2003-17W5 SRISD2003-21WA4 SRISD2003-25W3 SRISD2003-27W2 C C SRISD2003-7W7 SHELL SIZE 5 B B SRISD2003-24W7 SRISD2003-36W4 SRISD2003-43W2 SRISD2003-47W1 A A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 63 RMS SURFACE FINISH THIRD ANGLE PROJECTION a division of WINCHESTER TITLE CONNECTOR, SUB-D, POWER, O-RING PANEL MOUNT SIZE DOCUMENT A DO NOT SCALE DRAWING FORM 300067 REV A 7 6 5 4 3 (321) 254-4067 www.srihermetics.com SCALE 1:1 2 CAGE CODE SRISD2003 3PJY7 SHEET 1 REV B 3 OF 3