IRG4BC20U Data Sheet (352 KB, EN)

PD - 95445A
IRG4BC20UPbF
UltraFast Speed IGBT
INSULATED GATE BIPOLAR TRANSISTOR
Features
C
• UltraFast: optimized for high operating
frequencies 8-40 kHz in hard switching, >200
kHz in resonant mode
• Generation 4 IGBT design provides tighter
parameter distribution and higher efficiency than
Generation 3
• Industry standard TO-220AB package
• Lead-Free
VCES = 600V
VCE(on) typ. = 1.85V
G
@VGE = 15V, IC = 6.5A
E
n-channel
Benefits
• Generation 4 IGBTs offer highest efficiency available
• IGBTs optimized for specified application conditions
• Designed to be a "drop-in" replacement for equivalent
industry-standard Generation 3 IR IGBTs
TO-220AB
Absolute Maximum Ratings
VCES
IC @ TC = 25°C
IC @ TC = 100°C
ICM
ILM
VGE
EARV
PD @ TC = 25°C
PD @ TC = 100°C
TJ
TSTG
Parameter
Max.
Units
Collector-to-Emitter Breakdown Voltage
Continuous Collector Current
Continuous Collector Current
Pulsed Collector Current 
Clamped Inductive Load Current ‚
Gate-to-Emitter Voltage
Reverse Voltage Avalanche Energy ƒ
Maximum Power Dissipation
Maximum Power Dissipation
Operating Junction and
Storage Temperature Range
Soldering Temperature, for 10 seconds
Mounting torque, 6-32 or M3 screw.
600
13
6.5
52
52
± 20
5.0
60
24
-55 to + 150
V
A
V
mJ
W
300 (0.063 in. (1.6mm from case )
10 lbf•in (1.1N•m)
°C
Thermal Resistance
Parameter
RθJC
RθCS
RθJA
Wt
www.irf.com
Junction-to-Case
Case-to-Sink, Flat, Greased Surface
Junction-to-Ambient, typical socket mount
Weight
Typ.
Max.
–––
0.50
–––
2.0 (0.07)
2.1
–––
80
–––
Units
°C/W
g (oz)
1
01/21/10
IRG4BC20UPbF
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter
Min. Typ.
Collector-to-Emitter Breakdown Voltage
600 —
Emitter-to-Collector Breakdown Voltage „ 18
—
∆V(BR)CES/∆TJ Temperature Coeff. of Breakdown Voltage —
0.69
— 1.85
VCE(ON)
Collector-to-Emitter Saturation Voltage
— 2.27
— 1.87
VGE(th)
Gate Threshold Voltage
3.0
—
∆VGE(th)/∆TJ Temperature Coeff. of Threshold Voltage
—
-11
gfe
Forward Transconductance …
1.4
4.3
—
—
ICES
Zero Gate Voltage Collector Current
—
—
—
—
IGES
Gate-to-Emitter Leakage Current
—
—
V(BR)CES
V(BR)ECS
Max. Units
Conditions
—
V
VGE = 0V, IC = 250µA
—
V
VGE = 0V, IC = 1.0A
—
V/°C VGE = 0V, IC = 1.0mA
2.1
IC = 6.5A
VGE = 15V
—
IC = 13A
See Fig.2, 5
V
—
IC = 6.5A , TJ = 150°C
6.0
VCE = VGE, IC = 250µA
— mV/°C VCE = VGE, IC = 250µA
—
S
VCE = 100V, IC = 6.5A
250
VGE = 0V, VCE = 600V
µA
2.0
VGE = 0V, VCE = 10V, TJ = 25°C
1000
VGE = 0V, VCE = 600V, TJ = 150°C
±100 n A VGE = ±20V
Switching Characteristics @ TJ = 25°C (unless otherwise specified)
Qg
Qge
Qgc
td(on)
tr
td(off)
tf
Eon
Eoff
Ets
td(on)
tr
td(off)
tf
Ets
LE
Cies
Coes
Cres
Parameter
Total Gate Charge (turn-on)
Gate - Emitter Charge (turn-on)
Gate - Collector Charge (turn-on)
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Turn-On Switching Loss
Turn-Off Switching Loss
Total Switching Loss
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Total Switching Loss
Internal Emitter Inductance
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Min.
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Typ. Max. Units
Conditions
27
41
IC = 6.5A
4.5 6.8
nC
VCC = 400V
See Fig. 8
10
16
VGE = 15V
21
—
13
—
TJ = 25°C
ns
86 130
IC = 6.5A, VCC = 480V
120 180
VGE = 15V, RG = 50Ω
0.10 —
Energy losses include "tail"
0.12 —
mJ
See Fig. 10, 11, 13, 14
0.22 0.4
20
—
TJ = 150°C,
14
—
IC = 6.5A, VCC = 480V
ns
190 —
VGE = 15V, RG = 50Ω
140 —
Energy losses include "tail"
0.42 —
mJ
See Fig. 13, 14
7.5
—
nH
Measured 5mm from package
530 —
VGE = 0V
39
—
pF
VCC = 30V
See Fig. 7
7.4
—
ƒ = 1.0MHz
Notes:
 Repetitive rating; VGE = 20V, pulse width limited by
max. junction temperature. ( See fig. 13b )
‚ VCC = 80%(VCES), VGE = 20V, L = 10µH, RG = 50Ω,
(See fig. 13a)
„ Pulse width ≤ 80µs; duty factor ≤ 0.1%.
… Pulse width 5.0µs, single shot.
ƒ Repetitive rating; pulse width limited by maximum
junction temperature.
2
www.irf.com
IRG4BC20UPbF
25
For both:
Triangular wave:
Duty cycle: 50%
TJ = 125°C
Tsink = 90°C
Gate drive as specified
20
I
Load Current ( A )
Power Dissipation = 13W
Clamp voltage:
80% of rated
15
Square wave:
60% of rated
voltage
10
I
5
Ideal diodes
A
0
0.1
1
10
100
f, Frequency (kHz)
Fig. 1 - Typical Load Current vs. Frequency
(For square wave, I=IRMS of fundamental; for triangular wave, I=IPK)
100
TJ = 25°C
TJ = 150°C
10
1
VGE = 15V
20µs PULSE WIDTH
0.1
0.1
1
10
IC , Collector-to-Emitter Current (A)
IC , Collector-to-Emitter Current (A)
100
TJ = 150°C
10
TJ = 25°C
1
V CC = 10V
5µs PULSE WIDTH A
0.1
4
6
8
10
VCE , Collector-to-Emitter Voltage (V)
VGE , Gate-to-Emitter Voltage (V)
Fig. 2 - Typical Output Characteristics
Fig. 3 - Typical Transfer Characteristics
www.irf.com
A
12
3
IRG4BC20UPbF
VGE = 15V
Maximum DC Collector Current (A)
12
10
8
6
4
2
2.6
VCE , Collector-to-Emitter Voltage (V)
14
0
25
50
75
100
125
VGE = 15V
80µs PULSE WIDTH
IC = 13A
2.2
1.8
IC = 6.5A
1.4
I C = 3.3A
A
1.0
150
-60
TC , Case Temperature (°C)
-40
-20
0
20
40
60
80
100 120 140 160
TJ , Junction Temperature (°C)
Fig. 4 - Maximum Collector Current vs. Case
Temperature
Fig. 5 - Collector-to-Emitter Voltage vs.
Junction Temperature
Thermal Response (Z thJC )
10
1
D = 0.50
0.20
0.10
PDM
0.05
0.1
0.02
0.01
t
SINGLE PULSE
(THERMAL RESPONSE)
Notes:
1. Duty factor D = t
0.01
0.00001
1
/t
1
t2
2
2. Peak TJ = P DM x Z thJC + T C
0.0001
0.001
0.01
0.1
1
10
t 1 , Rectangular Pulse Duration (sec)
Fig. 6 - Maximum Effective Transient Thermal Impedance, Junction-to-Case
4
www.irf.com
IRG4BC20UPbF
800
Cies
20
V GE = 0V,
f = 1MHz
C ies = C ge + C gc , Cce SHORTED
C res = C gc
C oes = C ce + C gc
VGE , Gate-to-Emitter Voltage (V)
C, Capacitance (pF)
1000
600
Coes
400
Cres
200
A
0
1
10
100
VCE, Collector-to-Emitter Voltage (V)
Total Switching Losses (mJ)
VCC
VGE
TJ
IC
16
12
8
4
A
0
0
5
10
15
20
25
30
Qg , Total Gate Charge (nC)
Fig. 7 - Typical Capacitance vs.
Collector-to-Emitter Voltage
0.23
VCE = 400V
I C = 6.5A
Fig. 8 - Typical Gate Charge vs.
Gate-to-Emitter Voltage
= 480V
= 15V
= 25°C
= 6.5A
0.22
0.21
A
0.20
0
10
20
30
40
50
60
R G , Gate Resistance (Ω)
Fig. 9 - Typical Switching Losses vs. Gate
Resistance
www.irf.com
Fig. 10 - Typical Switching Losses vs.
Junction Temperature
5
IRG4BC20UPbF
RG
TJ
V CC
V GE
0.8
1000
= 50 Ω
= 150°C
= 480V
= 15V
I C , Collector-to-Emitter Current (A)
Total Switching Losses (mJ)
1.0
0.6
0.4
0.2
A
0.0
0
2
4
6
8
10
12
I C , Collector-to-Emitter Current (A)
Fig. 11 - Typical Switching Losses vs.
Collector-to-Emitter Current
6
14
VGE
= 20V
GE
TJ = 125°C
100
SAFE OPERATING AREA
10
1
0.1
1
10
100
1000
VCE , Collector-to-Emitter Voltage (V)
Fig. 12 - Turn-Off SOA
www.irf.com
IRG4BC20UPbF
RL = VCC
ICM
L
D.U.T.
VC *
50V
1000V
0 - VCC
c
480µF
d
* Driver same type as D.U.T.; Vc = 80% of Vce(max)
* Note: Due to the 50V power supply, pulse width and inductor
will increase to obtain rated Id.
Pulsed Collector Current
Test Circuit
Fig. 13b - Pulsed Collector
Fig. 13a - Clamped Inductive
Current Test Circuit
Load Test Circuit
IC
L
Driver*
D.U.T.
VC
Test Circuit
50V
1000V
c
Fig. 14a - Switching Loss
d
e
* Driver same type
as D.U.T., VC = 480V
c
d
90%
e
VC
10%
90%
Fig. 14b - Switching Loss
t d(off)
10%
I C 5%
Waveforms
tf
tr
t d(on)
t=5µs
E on
E off
E ts = (Eon +Eoff )
www.irf.com
7
IRG4BC20UPbF
TO-220AB Package Outline (Dimensions are shown in millimeters (inches))
TO-220AB Part Marking Information
(;$03 /( 7+,6,6$1,5)
/27&2'( $66( 0%/('2 1::
,17+($66(0%/</,1(&
Note: "P" in assembly line
position indicates "Lead-Free"
,17(5 1$7,21$/
5( &7,),(5
/2*2
$66( 0%/<
/27&2'(
3$57180 %(5
'$7(&2'(
<($5 :((.
/,1(&
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
Data and specifications subject to change without notice.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.01/2010
8
www.irf.com