8 7 6 5 4 3 2 REV ALUMINUM COMPATIBLE LASER WELDABLE SUB-D CONNECTOR - SRISD104 DOCUMENT REVISIONS CHANGE NO. DATE INIT RLSE APPROVED 05-04-06 J. PETRI • CONFIGURATION WITH THE FLANGE LOCATED AT THE TOP OF THE CONNECTOR • DESIGNED TO LASER WELD INTO AN ELECTRONIC CHASSIS WALL D • CONFORMS TO MIL-DTL-24308 (SIZE 20 CONTACT) AND ARE AVAILABLE IN 9, 15, 25, 37, AND 50 PIN COUNT CONFIGURATIONS. D • INCORPORATES BERYLLIUM-COPPER CONTACTS INDIVIDUALLY SEALED USING CERAMAX® PROPRIETARY CERAMIC TO ESTABLISH A DURABLE HERMETIC SEAL. • THE INTERNAL PINS CAN BE CONFIGURED TO ACCEPT INSULATED WIRE, AUTOMATIC WIRE BONDS, RIBBON WELDS, OR SOLDER CONNECTIONS. 1. LEAK RATE: LESS THAN OR EQUAL TO 1X10E-9 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. 2. INTERFACE AND MOUNTING HOLES IN ACCORDANCE WITH MIL-DTL-24308/2. C 3. MATERIALS: CONTACT: BERYLLIUM-COPPER ALLOY 172/173 IN ACCORDANCE WITH ASTM B196/197. INSULATOR: CERAMAX PROPRIETARY CERAMIC. WELD FLANGE: ALUMINUM ALLOY 4032 IN ACCORDANCE WITH ASTM B247. THREADED INSERTS: IN ACCORDANCE WITH NAS 1130-04-15. C 4. FINISH: CONTACTS: NICKEL PLATE PER QQ-N-290, .000100/.000250 THICK. GOLD PLATE PER ASTM B488, TYPE III, CODE A, .000050/.000100 THICK. PLATE ENTIRE EXPOSED PIN, BOTH ENDS. SHELL: CHEMICAL CONVERSION COAT IN ACCORDANCE WITH MIL-C-5541, CLASS 1A OR NONE. 5. ORDERING INSTRUCTIONS: SPECIFY BASE NUMBER FOLLOWED BY DASH NUMBERS INDICATING PIN COUNT AND CONFIGURATION (SEE SHEET 2+): EXAMPLE: SRISD104 - 25 - A 1 DETAILED CONFIGURATION PIN END STYLE (SEE VIEW A) NUMBER OF CONTACTS, X BASE NUMBER B B UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE CONNECTOR, SUB-D, TOP FLANGED, ALUMINUM COMPATIBLE LASER WELDABLE SIZE DOCUMENT 7 6 5 4 3 SRISD104 A SCALE FORM 300067 REV - (321) 254-4067 WWW.SRIHERMETICS.COM 2:1 2 CAGE CODE 3PJY7 SHEET 1 REV - 1 OF 3 A 8 6 7 5 4 W .002 3 2 SRISD104 DOCUMENT PIN EXTENSION .010 D X .002 D ROW A ROW A ROW B ROW B ROW C 2XR THREADED INSERT 9-37 PIN CONFIGURATIONS INSULATOR 50 PIN CONFIGURATION PIN EXTENSIONS (SEE SH 3) C C .020 ALL AROUND .015±.002 SHELL .381 Y .001 2XR .050 CONTACT Z .001 .003 MAX BRK ALL AROUND PIN END STYLE: A-STRAIGHT B-RADIUS C-WIREBOND FLAT D-SOLDERCUP E-STEPPED B VIEW A B HOLE DETAIL UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE CONNECTOR, SUB-D, TOP FLANGED, ALUMINUM COMPATIBLE LASER WELDABLE SIZE DOCUMENT 7 6 5 4 3 SRISD104 A SCALE FORM 300067 REV - (321) 254-4067 WWW.SRIHERMETICS.COM 2:1 2 CAGE CODE 3PJY7 SHEET 1 REV - 2 OF 3 A 8 D 7 6 STRAIGHT PIN END STYLE, A RADIUS PIN END STYLE, B PIN EXTENSION A, B, C PIN EXTENSION A, B, C 4 5 3 2 WIREBOND FLAT PIN END STYLE, C SOLDERCUP PIN END STYLE, D STEPPED PIN END STYLE, E PIN EXTENSION A, B, C PIN EXTENSION A, B, C SRISD104 DOCUMENT PIN EXTENSION A, B, C D .040 MIN FLAT .040 .063 .026 .015 MIN THICK .040 .045 .040 MIN WIDE .135 C PART NUMBER SRISD104 - X - D 1 A .190 B .190 PART NUMBER SRISD104 - X - E 1 C .190 A .105 B .105 C C .105 B B UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE 7 6 5 4 3 CONNECTOR, SUB-D, TOP FLANGED, ALUMINUM COMPATIBLE LASER WELDABLE SIZE DOCUMENT SRISD104 A SCALE FORM 300067 REV - (321) 254-4067 WWW.SRIHERMETICS.COM 2:1 2 CAGE CODE 3PJY7 SHEET 1 REV - 3 OF 3 A