VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 FTDI Chip VM800B Datasheet Embedded Video Engine Basic module General Purpose Multi Media Controller 1 Introduction The VM800B is a development module for FTDI’s FT800, which is used to develop and demonstrate the functionality of the FT800 Embedded Video Engine, EVE. This module behaves as an SPI slave, and requires a SPI Master for proper microcontroller interfacing and system integration. VM800B modules support 3 different LCD panel size options and are designed for industrial or commercial environments with precision fitted bezels in either black (-BK) or pearl (-PL). VM800B35A-xx is the 3.5” LCD VM800B43A-xx is the 4.3” LCD VM800B50A-xx is the 5.0” LCD 1.1 Features The VM800B utilises the FTDI FT800 Embedded Video Engine, EVE. Graphic, audio and touch features of the FT800 chip can be accessed with the VM800B. For a full list of the FT800’s features please see the FT800 datasheet. The VM800B has the following features: Ready to use LCD module. Integrated with resistive touch screen LCD panel On board LCD backlight LED Driver On board audio power amplifier and micro speaker Flexible power supply. Powering the VM800B using either a 2.1mm power jack , SPI master connector or via USB Micro-B port 5 V tolerant buffers when used with a 5V SPI Master Precision fitted bezel in black(-BK) or pearl (-PL) Use of FTDI devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees to defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting from such use. VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 2 Clearance No.: FTDI# 348 Ordering Information Note that the kits below require a 5V/1A power supply. It is NOT provided in the development kit, but is offered as an optional accessory with the following part types: Part No. Description VM800B35A-BK VM800B module, supports 3.3/5v MCU Adapter Board, 3.5 inch TFT LCD display panel preinstalled, black bezel VM800B43A-BK VM800B module, supports 3.3/5v MCU Adapter Board, 4.3 inch TFT LCD display panel preinstalled, black bezel VM800B50A-BK VM800B module, supports 3.3/5v MCU Adapter Board, 5.0 inch TFT LCD display panel preinstalled, black bezel VM800B35A-PL VM800B module, supports 3.3/5v MCU Adapter Board, 3.5 inch TFT LCD display panel preinstalled, pearl bezel VM800B43A-PL VM800B module, supports 3.3/5v MCU Adapter Board, 4.3 inch TFT LCD display panel preinstalled, pearl bezel VM800B50A-PL VM800B module, supports 3.3/5v MCU Adapter Board, 5.0 inch TFT LCD display panel preinstalled, pearl bezel VA-PSU-UK1 Accessory - UK Model 5V/1A USB Power Supply (Mfr # JX-B0520C-1-B) VA-PSU-US1 Accessory - US Model 5V/1A USB Power Supply (Mfr # JX-B0520B-1-B) VA-PSU-EU1 Accessory - EU Model 5V/1A USB Power Supply (Mfr # JX-B0520A-1-B) VA800A-SPI Accessory - High Speed Micro USB to SPI adapter for BASIC boards based on FT232H MPSSE design VA-FC-1M-BKW Accessory - Flat USB A to Micro B Cable 1M- Black and White VA-FC-1M-BLW Accessory - Flat USB A to Micro B Cable 1M- Blue and White VA-FC-STYLUS1 Accessory - Resistive Touch Screen Pen Stylus Table 2-1 – Ordering information Note: 3.5” display resolution is 320 x 240 (QVGA). 4.3”/5.0” display resolution is 480 x 272 (WQVGA) 2 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 Table of Contents 1 Introduction ................................................................................... 1 1.1 Features ........................................................................................................ 1 2 Ordering Information ..................................................................... 2 3 Hardware Description ..................................................................... 4 3.1 VM800B module ............................................................................................ 4 3.2 Physical Descriptions .................................................................................... 5 3.2.1 PCB layout ................................................................................................ 5 3.2.2 VM800B Connectors ................................................................................... 6 4 Board Schematics ........................................................................... 9 5 Hardware Setup Guide .................................................................. 13 6 7 5.1 Power Configuration ................................................................................... 13 5.2 MPSSE Setup ............................................................................................... 13 5.3 Arduino® Setup........................................................................................... 15 Assembling the Bezel and Panel Mounting ................................... 16 6.1 3.5” Dimensions .......................................................................................... 17 6.2 4.3” Dimensions .......................................................................................... 18 6.3 5.0” Dimensions .......................................................................................... 19 Specifications ............................................................................... 20 7.1 8 Optical Specification ................................................................................... 20 Contact Information ..................................................................... 23 Appendix A - References ....................................................................................... 23 Appendix B - List of Figures and Tables ................................................................. 24 Appendix C – Revision History ............................................................................... 25 3 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 3 Clearance No.: FTDI# 348 Hardware Description Please refer to section 3.2.2 for connector settings. Some VM800B jumpers must be set to work properly with your system. 3.1 VM800B module Figure 3-1 – VM800B module profile 3.5” display version Figure 3-2 - VM800B module profile 4.3” display version Figure 3-3 - VM800B module profile 5” display version NOTE: Also available in pearl. 4 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 The VM800B module is intended for direct use into existing applications that require a display. This module is suitable for interfacing with an external microcontroller that has a SPI Master channel. The VM800B module is available in multiple options: 3.5, 4.3 or 5.0 inch display options. The main functions of the VM800B are as follows: Micro USB connector SPI connector 2-pin connector for power supply 3.3V regulator: Takes 5V input and outputs 3.3V for on-board circuits LCD touch screen panel 5V tolerant buffers between the SPI master interface and the Slave interface of the FT800 o SPI timing requirements can be found in the FT800 datasheet. The on board level converter buffers introduce additional delay. The actual maximum SPI clock frequency depends on the host system timing and connection cable length to the VM800B PCB. 3 stage audio filter and power amplifier 8Ω speaker Audio line out option Precision fitted bezel 3.2 Physical Descriptions 3.2.1 PCB layout The VM800B module PCB layouts are illustrated in Figure 3-4 and Figure 3-5. Boards are four-layer, approximately 1.6 mm thickness. Figure 3-4 - VM800B module PCB view, 3.5 inch display version 5 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 Figure 3-5 - VM800B module PCB view, 4.3 and 5 inch display version 3.2.2 VM800B Connectors Connectors and jumpers are described in the following sections. CN1- 2-pin power connector 2 pin connector for 5V/3.3V power input to the board. Alternative to Micro USB connector. Pin No. Name Type Description 1 VCC P 5V or 3.3V DC power supply 2 GND Table 3-1 – CN1 Pinout P Ground CN2- Micro USB Receptacle This receptacle is strictly for 5V input to power the board. There is no USB Functionality Pin No. Name Type 1 VBUS P 2 NC NA No connection 3 NC NA No connection 4 NC NA No connection 5 GND Table 3-2 – CN2 Pinout P Description 5V power supply Ground 6 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 J2 - Selection between Lineout and loop back into the power amplifier. Selection between audio lineout and loop back into the power amplifier. Jumper position Description Short pin 1-2 Audio amp enabled (default) Short pin 2-3 Audio amp mute, Audio lineout on pin 1 Table 3-3 – J2 Pin Options J5- SPI Interface This is the interface where the SPI control and data signals are routed too. There are also power and ground pins on this interface. Pin No. Name Type 1 SCLK I SPI Clock input, 3.3V (5V tolerant) 2 MOSI I Master Out Slave in, 3.3V (5V tolerant) 3 MISO O Master In Slave out, 3.3V 4 CS# I Chip select , active low, 3.3V (5V tolerant) 5 INT# O Interrupt output active low, 3.3V 6 PD# I Power down control input, active low , 3.3V (5V tolerant) 7 5V P 5V power supply 8 3.3V P 3.3V power supply 9 GND P Ground GND P Ground 10 Table 3-4 – J5 Pinout Description JP1- Audio Amplifier Power Select This jumper provides the option to select the power supply voltage for the on-board power amplifier. Jumper position Description Short pin 1-2 3.3V selected (default) Short pin 2-3 Table 3-5 – JP1 Pin options 5V selected *This needs to be configured before audio can be heard. Default is 3.3V. Select 5V if wants to increase the maximum volume for the speaker. JP2 – On board amplifier enable Solder connection not fitted by default. JP3 - On board amplifier mute Solder connection not fitted by default. SW1 – Power source select 7 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Jumper position Description Short pin 1-2 Board power from CN1 Clearance No.: FTDI# 348 Short pin 2-3 Board power from CN2 (default) Table 3-6 – SW1 jumper options 8 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 Board Schematics 4 3V3 3V3 U2 1 4 10 13 2 5 9 12 A1 A2 A3 A4 7 3 6 8 11 Y1 Y2 Y3 Y4 FT800_CS# FT800_PD# FT800_MOSI FT800_SCK 3V3 VCORE GND 47k 74LCX125 GND MISO INT# VCC 3 6 8 11 MISO INT# Y1 Y2 Y3 Y4 AUDIO_L A1 A2 A3 A4 1 2 3 4 5 6 7 8 9 10 11 12 CS# FT800_SCK FT800_MISO FT800_MOSI FT800_CS# 2 5 9 12 FT800_MISO FT800_INT# AUDIO_SHDN# 7 GND FT800_INT# FT800_PD# 74LCX125 GND AUDIO_L GND SCKL/SCK MISO/SDA MOSI/SA0 CS_n/SA1 GPIO0/SA2 GPIO1 VCCIO MODE INT PD GND B2 B3 B4 B5 B6 B7 DCLK DISP HSYNC VSYNC DE C8 0.1uF 36 35 34 33 32 31 30 29 28 27 26 25 B2 B3 B4 B5 B6 B7 DCLK DISP HSYNC VSYNC DE FT800Q 13 14 15 16 17 18 19 20 21 22 23 24 3V3 C7 0.1uF BCKL GND C1 27pF 12MHz C2 27pF 3V3 GND NR3015T220M U4 VIN SW EN 4 8 9 3 AGND PGND EP VOUT BCKL C9 C10 10uF 0.1uF GND GND GND GND FB B0 B1 B2 B3 B4 B5 B6 B7 HSYNC VSYNC DCLK C4 C5 C6 4.7uF 0.1uF 4.7uF 0.1uF GND GND GND XP YM XM YP DE LEDA 7 C11 2.2nF 1 6 R5 4k7 LEDK D1 1N4148 LED Current Sense R7 MIC2289-24YML GND LCD1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 GND R7 4R7 GND AT035GT-07ED3 AUDIO_L AUDIO_SHDN# AUDIO_L AUDIO_SHDN# C12 0.22uF GND Figure 4-1 - VM800B35A (3.5” Version) 9 Copyright © 2014 Future Technology Devices International Limited LED-K LED-K LED-A LED-A NC NC NC RESET SPENA SPCK SPDA B0 B1 B2 B3 B4 B5 B6 B7 G0 G1 G2 G3 G4 G5 G6 G7 R0 R1 R2 R3 R4 R5 R6 R7 HSYNC VSYNC DOTCLK NC NC VDD VDD NC NC NC NC NC XR [Right] YD [Bottom] XL [Left] YU [Top] DEN GND GND 0.5B-54PBX 4.7R :=20mA R6 10k/1% GND G0 G1 G2 G3 G4 G5 G6 G7 VCORE C3 L1 2 DISP YM XM YP XP Y1 R3 R4 47k 47k 5V 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 0 0 LEDA R2 R3 R4 R5 R6 R7 GND R2 R3 R4 R5 R6 R7 G2 G3 G4 G5 G6 G7 1 4 10 13 OE1 OE2 OE3 OE4 XTI XTO GND VCC3V3 VCORE VCC3V3 XP YP XM YM GND BACKLIGHT U3 14 R2 3V3 R1 3V3 J1 LEDK R0 R1 U1 49 48 47 46 45 44 43 42 41 40 39 38 37 CS# PD# MOSI SCK R2 R3 R4 R5 R6 R7 G2 G3 G4 G5 G6 G7 14 VCC 47k CS# PD# MOSI SCK OE1 OE2 OE3 OE4 VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 3V3 3V3 U2 1 4 10 13 2 5 9 12 A1 A2 A3 A4 7 3 6 8 11 Y1 Y2 Y3 Y4 FT800_CS# FT800_PD# FT800_MOSI FT800_SCK 3V3 VCORE GND 47k 74LCX125 GND MISO INT# VCC 3 6 8 11 MISO INT# 1 4 10 13 OE1 OE2 OE3 OE4 Y1 Y2 Y3 Y4 AUDIO_L FT800_SCK FT800_MISO FT800_MOSI FT800_CS# 2 5 9 12 A1 A2 A3 A4 1 2 3 4 5 6 7 8 9 10 11 12 CS# FT800_MISO FT800_INT# AUDIO_SHDN# 7 GND FT800_INT# FT800_PD# 74LCX125 GND AUDIO_L GND SCKL/SCK MISO/SDA MOSI/SA0 CS_n/SA1 GPIO0/SA2 GPIO1 VCCIO MODE INT PD XTI XTO GND VCC3V3 VCORE VCC3V3 XP YP XM YM GND BACKLIGHT U3 14 R2 R1 3V3 13 14 15 16 17 18 19 20 21 22 23 24 3V3 C8 0.1uF C7 0.1uF GND B2 B3 B4 B5 B6 B7 DCLK DISP HSYNC VSYNC DE 36 35 34 33 32 31 30 29 28 27 26 25 B2 B3 B4 B5 B6 B7 DCLK DISP HSYNC VSYNC DE FT800Q BCKL GND YM XM YP XP Y1 R3 R4 47k 47k C1 27pF 12MHz C2 27pF 3V3 GND 5V NR3015T220M U4 VIN SW EN 4 8 9 3 AGND PGND EP VOUT C9 10uF GND C10 VCORE C3 C4 R0 R1 R2 R3 R4 R5 R6 R7 C5 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7 DCLK DISP HSYNC VSYNC DE XP YM XM YP GND C6 4.7uF 0.1uF 4.7uF 0.1uF GND GND LCD1 1 1 VLED2 2 VLED+ 3 3 GND 4 4 VDD 5 5 R0 6 6 R1 7 7 R2 8 8 R3 9 9 R4 10 10 R5 11 11 R6 12 12 R7 13 13 G0 14 14 G1 15 15 G2 16 16 G3 17 17 G4 18 18 G5 19 19 G6 20 20 G7 21 21 B0 22 22 B1 23 23 B2 24 24 B3 25 25 B4 26 26 B5 27 27 B6 28 28 B7 29 29 GND 30 30 PCLK 31 31 DISP 32 32 HSYNC 33 33 VSYNC 34 34 DE 35 35 NC 36 36 GND 37 37 X1[Right] 38 38 Y1[Bottom] 39 39 X2[Left] 40 40 Y2[Top] 0 AT043B35-15l-10 0 0.5B-40PBS GND FB LEDA 7 C11 2.2nF 1 6 R5 4k7 LEDK D1 1N4148 LED Current Sense R7 3R=32mA MIC2289-24YML R6 10k/1% 0.1uF GND GND 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 0 0 L1 2 BCKL GND J1 LEDK LEDA G0 G1 GND R2 R3 R4 R5 R6 R7 G2 G3 G4 G5 G6 G7 U1 3V3 49 48 47 46 45 44 43 42 41 40 39 38 37 CS# PD# MOSI SCK R2 R3 R4 R5 R6 R7 G2 G3 G4 G5 G6 G7 14 VCC 47k CS# PD# MOSI SCK OE1 OE2 OE3 OE4 GND GND R7 3R GND C12 0.22uF GND Figure 4-2 - VM800B43A/VM800B50A (4.3”/5.0” Version) 10 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 Figure 4-3 – VM800B SPI Interface and IO 11 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 AUD_3V3 AUDIO_L AUDIO_L R8 33R 5 U5 2 4 R9 R11 1k C13 4.7nF 3 AUD_3V3 C17 R10 1k OE 1 C16 1k C14 4.7nF AUDIO_L_out 0.47uF C15 4.7nF JP2 J2 AGND SN74LVC1G125DBVR 0.1uF AGND AGND AGND AGND R12 10k/1% JP3 AUD_3V3 R13 AUDIO_SHDN# AUDIO_SHDN# R16 33R 1 2 ININ+ JP3-Audio Amp. Mute Header 0.1" 20k/1% U6 4 3 JP2-Audio Amp. Enabled 1 2 3 AGND VDD VO+ VOSHDN GND BYPASS GND SP1 6 5 8 7 9 SP+ SP- J3 J4 1W/8Ohm TPA6205A1 R15 20k/1% R14 10k/1% R17 47k AGND 5V 3V3 XL1 Shunt 2.0mm C18 0.47uF AGND C20 C19 0.22uF AGND 1uF AGND AGND AUD_3V3 JP1 1 2 3 Jumper 2.0mm FB1 600R/1A FB2 C21 100uF C22 0.1uF C23 10nF 600R/1A GND AGND Max peak current ~400mA for 8-ohm speaker Figure 4-4 – VM800B Audio 12 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 5 Clearance No.: FTDI# 348 Hardware Setup Guide 5.1 Power Configuration There are 5 methods of powering the VM800B board. 1) USB Power(5V) - Connect USB power through micro-USB cable to CN2 2) DC IN(5V) - Connect 5V to CN1 3) DC IN(3.3V) - Connect 3.3V to CN1 and short J5 pin 7 and 8 4) J5 Power(5V) - Connect 5V to J5 pin 7 5) *J5 Power(3.3V) - Connect 3.3V to J5 pin 7 and 8 *Warning: Applying 5 V accidently in this mode may cause permanent damage to the VM800B module. The following table summarise how to power the VM800B board using the various methods. Power Method CN2 CN1 J5 Pin 7 J5 Pin 8 SW1 USB Power 5V N/C N/C N/C Short pin 2-3 DC IN(5V) N/C 5V N/C N/C Short pin 1-2 DC IN(3.3V) N/C 3.3V J5 Power(5V) N/C N/C J5 Power (3.3V) N/C N/C SHORT 5V Short pin 1-2 N/C 3.3V Any Position Any Position Table 5-1 Board power configuration 5.2 MPSSE Setup To provide a quick start with the VM800B development board, Windows based sample projects including source code are provided for users to get a touch and feel experience with the VM800B. An overview of the process is provided in the following paragraphs with more details in AN_245_VM800CB_SampleAPP_PC_Introduction MPSSE is a “multi purpose synchronous serial engine” interface available in some FTDI devices (e.g. FT2232D, FT232H, FT2232H and FT4232H). This engine allows users to bridge from a USB port on a PC to an I2C or SPI interface. Sample code is available for driving the FT800 over this interface with a FT232H device. VA800A-SPI is a MPSSE module accessory which can connect to the VM800B modules directly. Detailed information of VA800A-SPI can be found at: http://www.ftdichip.com/Products/modules/VA800A-SPI.html FTDI also provide a multipurpose MPSSE cable assembly C232HM-EDHSL-0(5V) or C232HM-DDHSL0(3.3V) for rapid setup. More information on the cable may be found at: http://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_C232HM_MPSSE_CABLE.pdf. In this section it is assumed the VA800A-SPI is used. VA800A-SPI supplies 5 V for VM800B modules. If the VM800B is connected to an SPI interface with a 3.3 V power supply, refer to table 5-1 for the board power configuration. Note, improper power supply and/or IO voltage connection may damage the VM800B module. 13 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 Figure 5-1 – VM800B connects to PC through VA800A-SPI accessory. Hardware Setup Connect the VA800A-SPI to the VM800B module in the correct orientation (with J5-pin1 of VM800B board connected to CN1-pin1 of VA800A-SPI board). Connect a USB cable (suggest FTDI accessory VA-FC-1M-BKW or VA-FC-1M-BLW) from the VA800A-SPI to the PC USB host port or self-powered hub port. The VA800A-SPI will supply power to the VM800B after the MPSSE driver is properly loaded and the USB host completes USB device configuration. NOTE: If using the C232HM-EDHSL-0(5V) MPSSE cable then the connection is as: J5 Pin number J5 Signal MPSSE pin number MPSSE Signal MPSSE Cable Lead Colour 1 SCK 2 SK ORANGE 2 MOSI 3 DO YELLOW 3 MISO 4 DI GREEN 4 CS# 5 CS BROWN 5 INT# 7 GPIOL1 PURPLE 6 PD# 9 GPIOL3 BLUE 7 5V 1 VCC RED 8 3.3V - - - 9 GND 10 GND Black 10 GND Table 5-2 – MPSSE cable (C232HM-EDHSL-0) connection - 14 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 Software Setup The following software setup steps apply to both the VA800A-SPI and MPSSE cable assembly. Download the MPSSE software. MPSSE cable and driver information can be found at http://www.ftdichip.com/Products/Cables/USBMPSSE.htm. Launch the demo application based on MPSSE from the PC The demo application notes can be found at following link: AN_245_VM800CB_SampleAPP_PC_Introduction 5.3 Arduino® Setup Sample code and demo applications are provided to users who want to connect the VM800B to a MCU. FTDI provides sample source code, sample application notes and a ready to run demo based on the Arduino® platform. Detailed information can be found at: http://testwebsite/Products/modules/VM800B.html 15 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 6 Clearance No.: FTDI# 348 Assembling the Bezel and Panel Mounting Figure 6-1 - VM800B Panel Mount (Front view) Figure 6-2 - VM800B Panel Mount (Rear view) 16 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 6.1 3.5” Dimensions Figure 6-3 - VM800B 3.5” panel mount dimensions 17 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 6.2 4.3” Dimensions Figure 6-4 - VM800B 4.3” panel mount dimensions 18 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 6.3 5.0” Dimensions Figure 6-5 - VM800B 5.0” panel mount dimensions 19 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 7 Clearance No.: FTDI# 348 Specifications 7.1 Optical Specification Table 7-1 - 3.5” TFT Optical specification 20 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 Table 7-2 - 4.3” TFT Optical Specification 21 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 Table 7-3 - 5” TFT Optical Specification 22 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 8 Clearance No.: FTDI# 348 Contact Information Head Office – Glasgow, UK Branch Office – Tigard, Oregon, USA Unit 1, 2 Seaward Place, Centurion Business Park Glasgow G41 1HH United Kingdom Tel: +44 (0) 141 429 2777 Fax: +44 (0) 141 429 2758 7130 SW Fir Loop Tigard, OR 97223 USA Tel: +1 (503) 547 0988 Fax: +1 (503) 547 0987 E-mail (Sales) E-mail (Support) E-mail (General Enquiries) E-Mail (Sales) E-Mail (Support) E-Mail (General Enquiries) [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] Branch Office – Taipei, Taiwan Branch Office – Shanghai, China 2F, No. 516, Sec. 1, NeiHu Road Taipei 114 Taiwan , R.O.C. Tel: +886 (0) 2 8797 1330 Fax: +886 (0) 2 8751 9737 Room 1103, No. 666 West Huaihai Road, Changning District, Shanghai, 200052 China Tel: +86 (0)21 6235 1596 Fax: +86 (0)21 6235 1595 E-mail (Sales) E-mail (Support) E-mail (General Enquiries) E-mail (Sales) E-mail (Support) E-mail (General Enquiries) [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] Web Site http://ftdichip.com Distributor and Sales Representatives Please visit the Sales Network page of the FTDI Web site for the contact details of our distributor(s) and sales representative(s) in your country. System and equipment manufacturers and designers are responsible to ensure that their systems, and any Future Technology Devices International Ltd (FTDI) devices incorporated in their systems, meet all applicable safety, regulatory and system-level performance requirements. All application-related information in this document (including application descriptions, suggested FTDI devices and other materials) is provided for reference only. While FTDI has taken care to assure it is accurate, this information is subject to customer confirmation, and FTDI disclaims all liability for system designs and for any applications assistance provided by FTDI. Use of FTDI devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees to defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting from such use. This document is subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Neither the whole nor any part of the information contained in, or the product described in this document, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH, United Kingdom. Scotland Registered Company Number: SC136640 23 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 Appendix A - References For module documentations, please refer to URL below: http://testwebsite/Products/modules/VM800B.html FT800 datasheet: DS_FT800_Embedded_Video_Engine FT800 software programming guide: FT800_Programmer_Guide FT800 sample application notes: AN_245_VM800CB_SampleAPP_PC_Introduction AN_246_VM800CB_SampleAPP_Arduino_Introduction C232HM-EDHSL-0 datasheet: http://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_C232HM_MPSSE_CABLE.pdf D2xx Programmers Guide: http://www.ftdichip.com/Support/Documents/ProgramGuides/D2XX_Programmer's_Guide(FT_000071).p df AN_108: Command Processor for MPSSE and MCU Host Bus Emulation Modes http://www.ftdichip.com/Support/Documents/AppNotes/AN_108_Command_Processor_for_MPSSE_and_ MCU_Host_Bus_Emulation_Modes.pdf 23 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 Appendix B - List of Figures and Tables List of Figures Figure 3-1 – VM800B module profile 3.5” display version .......................................................................... 4 Figure 3-2 - VM800B module profile 4.3” display version ........................................................................... 4 Figure 3-2 - VM800B module profile 5” display version .............................................................................. 4 Figure 3-3 - VM800B module PCB view, 3.5 inch display version .............................................................. 5 Figure 3-4 - VM800B module PCB view, 4.3 and 5 inch display version .................................................... 6 Figure 4-1 - VM800B35A (3.5” Version) ......................................................................................................... 9 Figure 4-2 - VM800B43A/VM800B50A (4.3”/5.0” Version).......................................................................... 10 Figure 4-3 – VM800B SPI Interface and IO .................................................................................................. 11 Figure 4-4 – VM800B Audio .......................................................................................................................... 12 Figure 5-1 – VM800B connects to PC through VA800A-SPI accessory. .................................................. 14 Figure 6-2 - VM800B Panel Mount (Rear view) ........................................................................................... 16 Figure 6-3 - VM800B 3.5” panel mount dimensions ................................................................................... 17 Figure 6-4 - VM800B 4.3” panel mount dimensions ................................................................................... 18 Figure 6-5 - VM800B 5.0” panel mount dimensions ................................................................................... 19 List of Tables Table 2-1 – Ordering information ................................................................................................................... 2 Table 3-1 – CN1 Pinout .................................................................................................................................... 6 Table 3-2 – CN2 Pinout .................................................................................................................................... 6 Table 3-4 – J2 Pin Options .............................................................................................................................. 7 Table 3-5 – J5 Pinout ....................................................................................................................................... 7 Table 3-6 – JP1 Pin options ............................................................................................................................ 7 Table 3-7 – SW1 jumper options .................................................................................................................... 8 Table 5-1 Board power configuration .......................................................................................................... 13 Table 5-2 – MPSSE cable (C232HM-EDHSL-0) connection........................................................................ 14 Table 7-1 - 3.5” TFT Optical specification ................................................................................................... 20 Table 7-2 - 4.3” TFT Optical Specification ................................................................................................... 21 Table 7-3 - 5” TFT Optical Specification ...................................................................................................... 22 24 Copyright © 2014 Future Technology Devices International Limited VM800B Datasheet Version 1.2 Document Reference No.: FT_000881 Clearance No.: FTDI# 348 Appendix C – Revision History Document Title: DS_VM800B Document Reference No.: FT_000881 Clearance No.: FTDI# 348 Product Page: http://www.ftdichip.com/eve.htm Document Feedback: Send Feedback Version 1.0 Initial Datasheet released 28/08/13 Version 1.1 Corrected dimensions for 4.3” mpounting in section 6.2 25/03/14 Version 1.2 Updated the optical characteristics for the 4.3” and 5” displays 12/06/14 25 Copyright © 2014 Future Technology Devices International Limited