Datasheet picoPak Optocoupler Modules picoPak optocoupler modules are ideal for applications where DIN rail space is limited. Requiring just 6mm of either 32mm or 35mm DIN rail, they easily fit in the space normally occupied by a single terminal block. Two versions are available: NEW MC5O-Input: Dual 24Vdc and 120Vac input with a 5-30Vdc @100mA output. 120Vac input includes leakage immunity up to 5mA. MC5O-Output: Designed as a solenoid driver, this module has a 24Vdc input and an output rated 5-34Vdc @ 10A maximum resistive or 6A - inductive. CSA Class 1 Div 2 approved Other features include: • status LED • input polarity protection • back-EMF diode protection on outputs • high input-output isolation • CSA approved United States Canada Mexico Weidmuller Inc. Weidmuller Ltd. Weidmuller, S.A. de C.V. 821 Southlake Blvd. 10 Spy Court 5 Sur No. 4311 Richmond, Virginia 23236 Markham, Ontario L3R 5H6 Col. Huexotitla Telephone: (800) 849-9343 Telephone: (800) 268-4080 72534 Puebla, Pue. Mexico Facsimile: (804) 379-2593 Facsimile: (905) 475-2798 Telephone: (22) 37 2549 Email: [email protected] Email: [email protected] Facsimile: (22) 43 1981 Website: www.weidmuller.com Website: www.weidmuller.ca Email: [email protected] 3/9 picoPak Optocoupler Modules Rated data Input voltage min. turn-on current protection Output Isolation General voltage current picoPak MC5O Input 24Vdc ±10% 120Vac/dc±10% 15Vdc, 90Vac 4mA @ 24Vdc 19mA @ 120Vac polarity diode on 24Vdc input MOV on 120Vac/dc input 120Vac input protected against up to 5mA of leakage current 5-30Vdc 100mA1) volt. drop @ max. load turn-on/off time, 24Vdc input 120Vac input 125Vdc input protection input-output operating temperature wire size width on 32/35mm rail Approvals 2Vdc 1ms 150ms typ. 100ms typ. back-EMF diode 2500V picoPak optional endplate3) 9915700000 C9039986 0° to + 50°C 22-12 AWG (0.5-4.0mm2) 6mm CSA picoPak MC5O Output 24Vdc nom. 12.5Vdc 5.0mA @ 24Vdc polarity diode 5-34Vdc 10A resistive 6A inductive 0.1Vdc @ 10A 1ms back-EMF diode 4000V -40 to +60°C 22-12 AWG (0.5-4.0mm2) 6mm CE, CSA Class 1 Division 2 Ordering data 7901690001 C9039986 1) derate by 0.8mA per °C above 25°C ambient 2) 5 to 20mm spacing between terminals recommended when operating in environments with ambient temperatures over 30°C 3) required on last terminal in a group, 1.5mm wide. 2 Subject to technical changes ·Printed in Canada ·99990257 ·12/01 3/10