Datasheet Ring Lug Terminal Blocks S T 5 , S T 5 -16 m m 2, S T 6 a n d S T 2 5 Weidmuller’s comprehensive range of bolt-type screw terminals offers secure connections for all power transmission applications. Bolt-type screw terminals with threads from M3.5 to M5 can be used depending on the conductor cross-section. • Touch-safe (Premium line) • Self-locking nut • Combi-foot for use with TS 35 and TS 32 • CSA / UL approved • Standard screw or test sleeve • High Voltage Capacity Weidmuller, Canada Weidmuller, Mexico Weidmuller, United States 10 Spy Court Markham, Ontario L3R 5H6 Telephone: (800) 268-4080 Facsimile: (877) 300-5635 Email: [email protected] Website: www.weidmuller.ca Blvd. Hermanos Serdán 698 Col. San Rafael Oriente Puebla, Puebla, Mexico C.P. 72029 Telephone: 01 222 2686267 Facsimile: 01 222 2686219 Email: [email protected] Website: www.weidmuller.com.mx 821 Southlake Blvd. Richmond, Virginia 23236 Telephone: (800) 849-9343 Facsimile: (804) 379-2593 Email: [email protected] Website: www.weidmuller.com Premium Line (“New” Touch-Safe) ST5 N / EN ST5PN / EN 50.0 54.0 Feed through 23.8 41.8 24.0 Self-locking Nut 10.2 / 0.402 Width ( mm / Inch ) Insulating material ( UL94 ) C 800 V 35 A 4 mm² 8 KV 3 US 600 V 35 A 22 - 10 AWG 800 V 46 A 6 mm² 8 KV 3 1.0 Nm 0.5 - 0.8 Nm M3.5 Ordering Data 600 V 46 A 22 - 8 AWG 1.2 Nm 0.5 - 0.8 Nm M4 Part No. C905234600 (screw) C905381600 (sleeve) (Beige) (Beige) Disconnect* (Beige) Disconnect* (Beige) US PA ( V0 ) iec/din-vde iec/din-vde Voltage Current Cross-section Impulse voltage Pollution severity Torque range Torque range - connections (See Lug Dimensions Chart P7) Thread C Self-locking Nut 13.2 / 0.519 PA ( V0 ) Rated data 48.8 Test Sleeve 46.0 Screw Feed through 53.0 R i n g L u g Te r m i n a l B l o c k s Part No. C905221600 (screw) C905382600 (sleeve) Accessories End plate (Beige) AP PA Width (mm/Inch) Part No. Width (mm/Inch) Part No. 1.5/.059 C905235600 1.5/.059 C905222600 Adapter sleeve - Pin Part No. 1071000000 0299600000 STB 21.6 (Beige) Pin PS4 Width (mm/Inch) Partition plate Part No. Part No. 1071000000 0299600000 Width (mm/Inch) Part No. (BG) TW PA (BG) TW HP (BG) TW PA TW HP - TS 32 Cross-connection Kit VH Q2 Q2 Q3 Q4 Q3 QL2 QL3 QL4 Part No. C905223600 C905224600 C905225600 C905239600 C905226600 Part No. Part No. Q5 Q7 Q10 Q50 QL2 QL3 QL4 QL5 QL7 QL10 QL50 Sleeve VH 13.5 Kit (1 Screw + 1 Washer) Q4 Part No. C905236600 C905237600 C905238600 Connection for short-circuit ZQV 10/2 End brackets EW35 Rails WEW35/2 EWK1 EW35 - TS 35 WEW35/2 - TS 35 EWK1 - TS 32 EWK2 - TS 32 WEW35 - TS 35 TS 35 steel TS 35 steel slotted TS 32 steel * Quick connection, incorporated test-point, circuit disconnecting 2 Width (mm/Inch) 8.5/.334 8.0/.315 8.5/.334 15.0/.59 12.2/.48 Part No. 0383560000 0206160000 Part No. 0383400000 0514500000 0122800000 Width (mm/Inch) 8.5/.334 8.0/.315 8.5/.334 15.0/.59 12.2/.48 Part No. 0383560000 0206160000 Part No. 0383400000 0514500000 0122800000 Premium Line R i n g L u g Te r m i n a l B l o c k s ST6 / EN ST6 T / EN ST25 / EN Feed through Test disconnect Feed through 69.5 69.5 83.5 Self-locking Nut 11.2 / 0.441 65.3 69.5 52.9 57.0 75.4 71.2 75.4 71.2 52.9 57.0 36 Self-locking Nut 11.2 / 0.441 PA ( V0 ) Self-locking Nut 18.2 / 0.716 PA ( V0 ) PA ( V0 ) iec/din-vde iec/din-vde C 800 V 41 A 6 mm² 8 KV 3 iec/din-vde US 600 V 40 A 26 - 10 AWG C 800 V 41 A 6 mm² 8 KV 3 1.5 - 1.8 Nm 0.5 - 0.8 Nm M4 US 600 V 40 A 26 - 10 AWG C 1000 V 101 A 25 mm² 8 KV 3 1.5 - 1.8 Nm 0.5 - 0.8 Nm M4 Part No. C904908601 (screw) C904908600 (sleeve) US 1000 V 100 A 20 - 3 AWG 2.5 (M5) / 3.2 (M6) 1.2 - 1.9 Nm M5 & M6 Part No. Part No. C905265600 (M5) (screw) C905379600 (M5) (sleeve) Part No. C905264600 (M6) (screw) C905380600 (M6) (sleeve) C904909601 (screw) C904909600 (sleeve) Width (mm/Inch) Part No. Width (mm/Inch) Part No. Width (mm/Inch) Part No. 1.0/.039 C904910600 1.0/.039 C905222600 1.5/.059 C905266600 Part No. Part No. 0299600000 Width (mm/Inch) Width (mm/Inch) 8.5/.334 8.0/.315 8.5/.334 15.0/.59 12.2/.48 Part No. Part No. 0299600000 Width (mm/Inch) Part No. 0299600000 Width (mm/Inch) Part No. Part No. C905064600 C905065600 C905066600 Part No. C905064600 C905065600 C905066600 Part No. C012361000 C012371000 C012381000 C905067600 C905067600 C033861000 C904925600 C904926600 C904927600 C904925600 C904926600 C904927600 C904929600 C904929600 C904288000 C904940600 Part No. C904288000 C904940600 Part No. 1739680000 1739680000 Part No. 1061200000 0199360000 Part No. 0383400000 0514500000 0122800000 Width (mm/Inch) 8.5/.334 8.0/.315 8.5/.334 15.0/.59 12.2/.48 Part No. 1061200000 0199360000 Part No. 0383400000 0514500000 0122800000 Part No. Width (mm/Inch) 8.5/.334 8.0/.315 8.5/.334 15.0/.59 12.2/.48 Part No. 0199360000 1059000000 Part No. 0383400000 0514500000 0122800000 3 R i n g L u g Te r m i n a l B l o c k s Accessories Dekafix Preprinted Markers for Terminals Lug Dimensions Chart (Terminals DIN 46237) Ø A (Max) mm/Inch Vertical Print Horizontal Print ST5 N / EN M3.5 8.0/.315 Length x Pitch 5 x 5mm 5 x 5mm ST5PN / EN M4 10.0/.394 Model DEK 5/5 DEK 5/5 ST6 / EN M4 8.0/.315 ST6 T / EN M4 8.0/.315 0473560001 0473460001 ST25 V1 / EN M5 15.0/.590 0473460051 ST25 V1 / EN M6 15.0/.590 ST25 V2 / EN M5 15.0/.590 ST25 V2 / EN M6 15.0/.590 ST5 16mm² M5 12.0/.473 ST5 / EN M3.5 8.0/.315 ST5P / EN M4 10.0/.394 ST5P1 V1 / EN M4 10.0/.394 ST5P1 V2 / EN M4 10.0/.394 ST5P1 V4 / EN M4 10.0/.394 ST5P1 V5 / EN M5 12.0/.473 1-50 Preprinted Description Terminal Type 51-100 0473560051 101-150 0473560101 0473460101 151-200 0473560151 0473460151 201-250 0473560201 0473460201 251-300 0473560251 0473460251 301-350 0473560301 0473460301 0473460351 351-400 0473560351 401-450 0473560401 0473460401 451-500 0473560451 0473460451 Additional number sequences, letters and symbols are available. Dekafix Multi-Card Markers (Blank & Custom Print) A (max) Model Type DEK 5/5 MC Blank Part Number 1609801044 DEK 5/5 MC Custom Print 1854500000 TRIM Support and Hoods Terminal Block ST5 ST5P ST5P1 / ST5 N / ST5 PN ADP ADP HP ADP - 0485300000 (1m) HP2 - 0485660000 Hole Ø 6mm ST5 - 16mm² ADP - 0447700000 (1m) --- ST25 ADP - 04854000000 (1m) HP3 - 0485760000 ST6 ST6T ADP3 - 0485400000 (1m) HP4 - 0485860000 ADP HP HP(2x) Pin PS4 0299600000 Bus support ZST 167868000 Screwdrivers For Screw, Sleeve or Self-locking versions only. Terminal Type Description a (mm/Inch) b (mm/Inch) c (mm/Inch) ST5 N / EN SD 1.0x5.5x150 1.0/.039 5.5/.216 150/5.91 Part Number 9008350000 ST5PN / EN SD 1.0x5.5x150 1.0/.039 5.5/.216 150/5.91 9008350000 ST6 / EN SD 1.0x5.5x150 1.0/.039 5.5/.216 150/5.91 9008350000 ST6 T / EN (Terminal) SD 1.0x5.5x150 1.0/.039 5.5/.216 150/5.91 9008350000 ST6 T / EN (Disconnect) SD 0.5x3.0x8.0 0.5/.019 3.0/.118 8.0/.314 9008320000 ST25 V1 / EN SD 1.2x6.5x150 1.2/.047 6.5/.255 150/5.91 9009010000 ST25 V2 / EN SD 1.2x6.5x150 1.2/.047 6.5/.255 150/5.91 9009010000 ST5 / EN SDK PH1 80/3.14 9008480000 ST5P / EN SDK PH1 80/3.14 9008480000 ST5P1 V2 / EN SDK PH1 80/3.14 9008480000 ST5P1 V4 / EN SDK PH1 80/3.14 9008480000 ST5P1 V5 / EN SDK PH2 100/3.93 9008490000 4 R i n g L u g Te r m i n a l B l o c k s Standard Line ST5P / EN 43.5 47.5 39.5 42.0 44.0 Feed through Screw 9.7 / 0.382 Width ( mm / Inch ) Insulating material ( UL94 ) Screw 9.7 / 0.382 PA ( V2 ) Rated data PA ( V2 ) iec/din-vde C Voltage Current Cross-section Impulse voltage Pollution severity Torque range Torque range - connections (See Lug Dimensions Chart P7) Thread 800 V 35 A 4 mm² 6 KV 3 US /UL 600 V 35 A 20 - 10 AWG iec/din-vde C 800 V 35 A 4 mm² 6 KV 3 0.8 - 1.6 Nm /UL M3.5 Part No. C9000676 (Beige) (Beige) Disconnect (Beige) Disconnect (Beige) US 600 V 45 A 22 - 10 AWG 0.8 - 1.6 Nm M3.5 Ordering Data 52.0 ST5 / EN Feed through Part No. C9001456 Accessories End plate TRIM (Beige) AP PA Width (mm/Inch) Part No. Width (mm/Inch) Part No. 1.5/.059 C9000686 1.5/.069 c9001506 Adapter sleeve - Pin Part No. Part No. STB 21.6 (Beige) Pin PS4 Partition plate (BG) TW PA (BG) TW HP (BG) TW PA TW HP - TS 32 Width (mm/Inch) 1.5/.059 0.5/.019 VH Q2 Q2 Q3 Q4 Q3 QL2 QL4 QL3 Q4 C904318600 0474700000 Width (mm/Inch) 1.5/.059 0.5/.019 Part No. c9001610 Cross-connection Kit Part No. Q5 Q7 Q10 Q50 QL2 QL3 QL4 QL5 QL7 QL10 QL50 Sleeve VH 12.5/17 Kit (1 Screw + 1 Washer) Connection for short-circuit Part No. C904318600 0474700000 Part No. c9001530 c9001620 c9001540 C9001370 C9001380 C9001390 c9001470 c9001480 C9000750 c9001490 c9000760 c9000780 Part No. 0267000000 0267100000 c9001460 Part No. ZQV 10/2 End brackets EW35 WEW35/2 EWK1 EW35 - TS 35 WEW35/2 - TS 35 EWK1 - TS 32 EWK2 - TS 32 WEW35 - TS 35 Rails TS 35 steel TS 35 steel slotted TS 32 steel 5 Width (mm/Inch) 8.5/.334 8.0/.315 8.5/.334 15.0/.59 12.2/.48 Part No. 0383560000 0206160000 Part No. 0383400000 0514500000 0122800000 Width (mm/Inch) 8.5/.334 8.0/.315 8.5/.334 15.0/.59 12.2/.48 Part No. 0383560000 0206160000 Part No. 0383400000 0514500000 0122800000 Standard Line R i n g L u g Te r m i n a l B l o c k s ST5P1 V2 / EN ST5P1 V1 / EN ST5P1 V4 and 5 / EN 42.6 42.6 42.6 Feed through Feed through Feed through ST5S-16mm2 STL5-16mm2 Feed through Test disconnect Screw 13.2 / 0.519 Nut 13.2 / 0.519 PA ( V2 ) PA ( V2 ) C US 300 V 46 A 24 - 6 AWG 1.2 - 1.9 Nm 0.8 - 1.6 Nm M4 Part No. C904916600 PA ( V2 ) US 300 V 46 A 24 - 6 AWG 1.2 - 2.4 Nm 0.8 - 1.6 Nm M4 Part No. C904904600 Nut 16.5 / 0.642 PA ( V0 ) iec/din-vde C 500 V 46 A 6 mm² 6 KV 3 41.6 45.9 41.6 45.9 Nut 16.5 / 0.642 iec/din-vde C 500 V 46 A 6 mm² 6 KV 3 54.3 51.1 47.5 Self-locking Nut 13.2 / 0.519 iec/din-vde iec/din-vde 500 V 46 A 6 mm² 6 KV 3 51.1 47.5 51.1 47.5 54.3 PA ( V0 ) /UL iec/din-vde /UL US 300 V 46 A 24 - 6 AWG 1.2 - 2.4 Nm 0.8 - 1.6 Nm M4 & M5 Part No. C904922600 (M4) C904915600 (M5) 800 V 600 V 76 A 65 A 16 mm² AWG 12...10 8 KV 3 2.0 - 4.0 Nm 0.8 - 1.6 Nm M5 Part No. 0448360000 800 V 600 V 76 A 65 A 16 mm² AWG 12...10 8 KV 3 2.0 - 4.0 Nm 0.8 - 1.6 Nm M5 Part No. 0448460000 Width (mm/Inch) Part No. Width (mm/Inch) Part No. Width (mm/Inch) Part No. Width (mm/Inch) Part No. Width (mm/Inch) Part No. 1.5/.059 C9001506 1.5/.059 C9001506 1.5/.059 C9001506 1.5/.059 0447260000 1.5/.059 0447260000 Part No. Width (mm/Inch) 1.5/.059 0.5/.019 Part No. C904319600 0474700000 Part No. Width (mm/Inch) 1.5/.059 0.5/.019 Part No. C904319600 0474700000 Part No. Width (mm/Inch) 1.5/.059 0.5/.019 Part No. C904319600 0474700000 Part No. Width (mm/Inch) 1.5/.059 Part No. 0477660000 Part No. Width (mm/Inch) 1.5/.059 Part No. 0477660000 Part No. Part No. Part No. Part No. Part No. C904913600 C904914600 C904917600 C904913600 C904914600 C904917600 C904913600 C904914600 C904917600 3834300000 3834300000 C904918600 C904918600 C904918600 Part No. Part No. C904919600 C904919600 Part No. Width (mm/Inch) 8.5/.334 8.0/.315 8.5/.334 15.0/.59 12.2/.48 Part No. 0383560000 0206160000 Part No. 0383400000 0514500000 0122800000 6 C904919600 Part No. Part No. Width (mm/Inch) 8.5/.334 8.0/.315 8.5/.334 15.0/.59 12.2/.48 Part No. 0383560000 0206160000 Part No. 0383400000 0514500000 0122800000 Width (mm/Inch) 8.5/.334 8.0/.315 8.5/.334 15.0/.59 12.2/.48 Part No. 0383560000 0206160000 Part No. 0383400000 0514500000 0122800000 Width (mm/Inch) 8.5/.334 8.0/.315 8.5/.334 15.0/.59 12.2/.48 Part No. 0383560000 1061200000 0206160000 Part No. 0383400000 0514500000 0122800000 Width (mm/Inch) 8.5/.334 8.0/.315 8.5/.334 15.0/.59 12.2/.48 Part No. 0383560000 1061200000 0206160000 Part No. 0383400000 0514500000 0122800000 Subject to technical changes • 03/15-XM LIT1117