CONSTITUTION MATERIALS LIST Datasheet The RoHS directive, REACH regulation, and other laws and regulations related to the management of environmentally hazardous substances come into effect. When developing products, the global environmental load must be considered. ROHM pursues green procurement and endeavors to increase the detection accuracy of chemicals contained in parts and procured materials while at the same time placing great importance on the internal chemical management system that was built to ensure that no prohibited substances are procured, used, or shipped in order to provide a steady supply of worry-free products. TR-TO3PFP-JE_Rev.5 Type Part No. Package JEDEC (JEITA) Mass (mg) TO-3PF - 5575.9208 Transistor Part Name № 1 Mold compound Weight (mg) 3082.3871 CAS № Weight (mg) Portion vs. Products Portion vs. Part Name Silica (crystalline) 60676-86-0 2311.7903 41.46% 75.00% Epoxy resin 29690-82-2 400.7103 7.19% 13.00% Phenol-formaldehyde resin 9003-35-4 308.2387 5.53% 10.00% Epoxy resin bromide 40039-93-8 30.8239 0.55% 1.00% 1309-64-4 30.8239 0.55% 1.00% Substance Name Antimony trioxide Subtotal 2 Lead frame 2423.8791 3082.3871 External plating 39.3666 7440-50-8 2421.4536 43.43% 99.90% Iron (Fe) 7439-89-6 2.4255 0.04% 0.10% 7440-31-5 39.3666 Tin (Sn) 2423.8791 Subtotal 4 Die 22.5909 39.3666 Die attach 5.9501 1.7470 0.71% 100% 7440-21-3 22.2430 0.40% 98.46% 7440-02-0 0.1890 0.00% 0.84% Silver (Ag) 7440-22-4 0.1110 0.00% 0.49% Gold (Au) 7440-57-5 0.0479 0.00% 0.21% Lead (Pb) *1 7439-92-1 5.5038 0.10% 92.50% Tin (Sn) 7440-31-5 0.2975 0.01% 5.00% 7440-22-4 0.1488 0.00% 2.50% 22.5909 Subtotal Bonding wire 100% 100.00% Nickel (Ni) Silver (Ag) 6 43.47% 0.71% Silicon (Si) Subtotal 5 100% Copper (Cu) Subtotal 3 55.28% 5.9501 7429-90-5 Aluminum (Al) Subtotal Total - 1.7470 0.41% 100% 0.11% 0.03% 1.7470 0.03% 5575.9208 100% 100% 100.00% 100% - Note *1 : It is exempted from the RoHS, because of the high melting point solder. Disclaimer ・All information in this document is furnished for exploratory or indicative purposes only. ・This information provides estimates of the average weights and content of component materials. and does not include impurities or metals diffused in the silicon. ・ROHM strives for the accuracy of the information, however, ROHM does not give any representations or warranties as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. ・ROHM may make changes to information published in this document at any time and without notice. www.rohm.com ©2014 ROHM Co., Ltd. All rights reserved 2014.4 - Rev.A