A ER040573 BY APPD DATE DCAM .687 17.45 DESCRIPTION KPL 2/21/12 1.29 32.74 1.25 31.72 REV .670 17.02 .100 2.54 MAX PANEL 2-1539-1M27 .510 12.95 .223 5.66 7/16-28 UNEF-2A THREAD MOUNTING HOLE MARK: KINGS 0122-E24-C1601N (DATE CODE) NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR USE WITH BOEING BMS13-65 OF & ADAMS RUSSELL FC14Z CABLES. 2. FOR CABLING INSTRUCTIONS SEE 3-546-12. 3. FOR CRIMPING USE DIE KTH-2161. 4. INTERFACE PER MIL-STD-348, SERIES TNC, SOCKET CONTACT. 5. CENTER CONTACT,& K-GRIP SLEEVE ARE SUPPLIED UNASSEMBLED. 6. MATERIALS: K-GRIP SLEEVE: COMMERCIAL BRONZE, ASTM B135 INSULATOR: TEFLON, ASTM D1710 CENTER CONTACT: BERYLLIUM COPPER, ASTMB196 GASKET: SILICONE RUBBER, A-A-59588 LOCKWASHER: PHOSPHOR. BRONZE, ASTM B103 ALL OTHER METAL PARTS: BRASS PER ASTM B16 7. FINISHES: CENTER CONTACT: .000050 MIN GOLD PLATE PER ASTM B488 OVER .000050 MIN NICKEL PER AMS-QQ-N-290 (RoHS) ALL OTHER METAL PARTS: .000050 MIN NICKEL PER AMS-QQ-N-290 OVER COPPER PER ASTM B734 (RoHS) 8. ELECTRICAL CHARACTERISTICS: NOMINAL IMPEDANCE: 50 OHMS WORKING VOLTAGE: 500 VRMS FREQUENCY RANGE: DC TO 11 GHz VSWR: 1.30 MAX 9. WEIGHT: 15.6 GRAMS DMF029 B .625[15.87] HEX NUT CATALOG P/N: 0122-E24-C1601N PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 4:1 CUSTOMER SALES DRAWING DRAWN DATE APPROVED 01/19/2012 DCAM KPL APPROVED DATE APPROVED 02/20/12 JB XXX Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 THIRD ANGLE DATE 01/20/12 DATE XX/XX/XX JACK, BLKHD, TNC CRIMP ATTACHMENT (RoHS COMPLIANT) SHT A SD0122-E24-C1601N 1 OF 1 REV A