DESCRIPTION A RELEASED DRAWING PER ER041905 BY APPD DATE DCam 2. MATERIAL SPECIFICATIONS: BAYONET SLEEVE, BODY: BRASS PER ASTM B16 INSULATOR: TEFLON PER ASTM D1710 CONTACT,SPRING WASHER,OUTER CONTACT: BERYLLIUM COPPER, ASTMB196 GASKET: SILICONE RUBBER, A-A-59588 REV COL 08/08/11 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SDPRF-206. 3. FINISH SPECIFICATIONS: BAYONET SLEEVE, BODY: .000100MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (ROHS) CONTACT: .000030 MIN. GOLD PER ASTM B488, OVER .000080 MIN NICKEL PER AMS-QQ-N-290 (ROHS) SPRING WASHER: .000200 MIN SILVER PER QQ-S-365 OVER .000020 MIN COPPER PER ASTM B734 (ROHS) ALL OTHER METAL PARTS: .000050 MIN NICKEL PER AMS-QQ-N290 OVER .000050 MIN COPPER PER ASTM B734 (ROHS) 4. ELECTRICAL SPECIFICATIONS: IMPEDANCE: 75 OHMS FREQUENCY RANGE: DC TO 3 GHz RETURN LOSS: 25 dB MIN .545 13.84 1.142 29.01 CATALOG P/N:206H-034-00001N PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 3:1 THIRD ANGLE Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER SALES DRAWING DRAWN COL APPROVED XXX DMF026 B DATE APPROVED 08/08/11 DCam DATE APPROVED XX/XX/XX XXX DATE 08/15/11 DATE XX/XX/XX BNC MALE TO 1.0/2.3 FEMALE ADAPTOR(ROHS) A SD206H-034-00001N SHT 1 OF 1 REV A