EN

Incremental encoders
Solid shaft with square flange
100…5000 pulses per revolution
EIL580 - square flange - OptoPulse®
Features
–– Size ø58 mm
–– Precise optical sensing
–– Output signal level TTL or HTL
–– Square flange 63.5 x 63.5 mm
–– Connection axial, radial or tangential
–– Pulses per revolution up to 5000
–– High protection up to IP 67
–– High resistance to shock and vibrations
Technical data - mechanical design
Voltage supply
Size (flange)
63.5 x 63.5 mm
Shaft type
ø10 x 20 mm, solid shaft with
edge
ø9.525 mm (3/8") x 20 mm,
solid shaft with edge
Admitted shaft load
≤40 N axial
≤80 N radial
Flange
Clamping flange square
63.5 x 63.5 mm
Protection DIN EN 60529
IP 65 (without shaft seal),
IP 67 (with shaft seal)
Operating speed
≤6000 rpm (+20 °C, IP 67)
≤12000 rpm (+20 °C, IP 65)
5 VDC ±5 %
8...30 VDC
4.75...30 VDC
Reverse polarity protection Yes
Short-circuit proof
Yes (HTL)
Yes (TTL, max. 1 s and 1 signal)
Consumption w/o load
≤70 mA
Pulses per revolution
100...5000
Phase shift
90° ±10°
Scan ratio
40...60 %
Reference signal
Zero pulse, width 90° ±10 %
Sensing method
Optical
Output frequency
≤300 kHz (TTL)
≤160 kHz (HTL)
Starting torque
≤0.015 Nm (+20 °C, IP 65)
≤0.02 Nm (+20 °C, IP 67)
Output signals
A+, B+, R+, A-, B-, R-
Materials
Output stages
TTL/RS422
HTL/push-pull
Housing: aluminium die-cast
Flange: aluminium
Solid shaft: stainless steel
Interference immunity
DIN EN 61000-6-2
Operating temperature
-40...+85 °C
Emitted interference
DIN EN 61000-6-3
Relative humidity
90 % non-condensing
Approval
UL 508 / CSA 22.2
Resistance
DIN EN 60068-2-6
Vibration 30 g, 10-2000 Hz
DIN EN 60068-2-27
Shock 300 g, 6 ms
Connection
Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cable
Weight approx.
370 g
1
www.baumer.com/motion
7/1/2016
Technical data - electrical ratings
Subject to modification in technic and design. Errors and omissions excepted.
EIL580 with square flange
Incremental encoders
Solid shaft with square flange
100…5000 pulses per revolution
EIL580 - square flange - OptoPulse®
Part number
Square flange
EIL580-S
Q
.
.
.A
Pulse number - see table
E
H
N
Q
R
L
F
B
T
U
D
A
P
Q
Voltage supply / output stages
5 VDC, TTL/RS422, 6 channel
8...30 VDC, TTL/RS422, 6 channel
8...30 VDC, HTL/push-pull, 6 channel
4.75...30 VDC, HTL/push-pull, 6 channel
Connection
Cable radial, 1 m
Cable radial, 2 m
Flange connector M23, 12-pin, radial, male, ccw
Flange connector M12, 8-pin, radial, male, ccw
Cable axial, 1 m
Cable axial, 2 m
Flange connector M23, 12-pin, axial, male, ccw
Flange connector M12, 8-pin, axial, male, ccw
Cable tangential, 1 m
Cable tangential, 2 m
Protection
5 IP 65
7 IP 67
Specification solid shaft
U3 ø9.525 mm (3/8”) x 20 mm, with edge
10 ø10 x 20 mm, with edge
Pulse number
100
120
150
200
250
256
300
360
400
500
512
600
720
800
900
1000
1024
1200
1250
1440
1500
1800
2000
2048
2500
3000
3600
4000
4096
5000
2
www.baumer.com/motion
7/1/2016
Subject to modification in technic and design. Errors and omissions excepted.
Flange
Q Square flange
Incremental encoders
Solid shaft with square flange
100…5000 pulses per revolution
EIL580 - square flange - OptoPulse®
Accessories
Connectors and cables
10127844
Connection cable 2 m shielded with female
connector M12, 8-pin, straight (ESG
34FH0200G)
10129332
Connection cable 5 m shielded with female
connector M12, 8-pin, straight (ESG
34FH0500G)
10129333
Connection cable 10 m shielded with
female connector M12, 8-pin, straight (ESG
34FH1000G)
11053961
Connection cable 2 m shielded with female
connector M12, 8-pin, angled (ESW
33FH0200G)
11053962
Connection cable 5 m shielded with female
connector M12, 8-pin, angled (ESW
33FH0500G)
10170054
Connection cable 10 m shielded with
female connector M12, 8-pin, angled (ESW
33FH1000G)
10164705
Connector M23, 12-pin
11095302
Connection cable 1 m shielded with female
connector M23, 12-pin
11100408
Connection cable 2 m shielded with female
connector M23, 12-pin
11100430
Connection cable 5 m shielded with female
connector M23, 12-pin
11100431
Connection cable 10 m shielded with female
connector M23, 12-pin
Coupling CPS25 L=19 d1=04/d2=10
11065918
Coupling CPS25 L=19 d1=07/d2=10
11065920
Coupling CPS25 L=19 d1=08/d2=10
11065921
Coupling CPS25 L=19 d1=09/d2=10
11065922
Coupling CPS25 L=19 d1=10/d2=06
11065923
Coupling CPS25 L=19 d1=10/d2=10
11065924
Coupling CPS25 L=19 d1=10/d2=11
11065925
Coupling CPS25 L=19 d1=10/d2=12
10141132
Spring washer coupling D1=06 / D2=10
10141133
Spring washer coupling D1=10 / D2=10
11034138
Spring washer coupling D1=10 / D2=16
11034140
Spring washer coupling D1=10 / D2=14
11034141
Spring washer coupling D1=10 / D2=12
11050507
Bellows coupling aluminium/stainless steel
D1=06 / D2=10
11101781
Double loops coupling D1=10 / D2=10
3
www.baumer.com/motion
7/1/2016
11065915
Subject to modification in technic and design. Errors and omissions excepted.
Mounting accessories
Incremental encoders
Solid shaft with square flange
100…5000 pulses per revolution
EIL580 - square flange - OptoPulse®
Output signals
Terminal assignment
&ORFNZLVHURWDWLQJGLUHFWLRQZKHQORRNLQJDWIODQJH
Flange connector M23, 12-pin / cable
Pin
Core color
Assignment
$
1
pink
B-
2
–
–
$
3
blue
R+
4
red
R-
5
green
A+
6
yellow
A-
7
–
–
8
grey
B+
9
–
–
10
white
GND
11
–
–
12
brown
UB
%
%
ƒ
5
5
Screen:
Connected to housing
Cable data: PVC, [4x2x0.14 mm2], bending radius
>32.5 mm, outer diameter 6.5 mm
Trigger level
Outputs
TTL/RS422
Output level High
≥2.5 V
2 10
Output level Low
≤0.5 V
3
Load
≤20 mA
Outputs
HTL/Push-pull
Output level High
≥UB -3 V
Output level Low
≤1.5 V
Load
≤20 mA
1
4
9
8
12
7
6
11
5
Assignment
1
GND
2
UB
3
A+
4
A-
5
B+
6
B-
7
R+
8
R7
1
2
3
4
6
8
5
4
www.baumer.com/motion
7/1/2016
Pin
Subject to modification in technic and design. Errors and omissions excepted.
Flange connector M12, 8-pin
Incremental encoders
Solid shaft with square flange
100…5000 pulses per revolution
EIL580 - square flange - OptoPulse®
Dimensions
Square flange, flange connector M23, radial
ø9.525
8.64
ø10
9.
20
33.9
14.1
□63.5
7.62
(6.48)
□52.4
A
55.5
a
ø58
d g7
15
ø5.5
a
ø36h8
d g7
ø0.03 A
ø0.07 A
14.4
M23x1
Square flange, flange connector M12, radial
ø9.525
8.64
ø10
9.
7.62
15
33.9
14.1
□63.5
(6.48)
□52.4
A
51.4
a
ø58
d g7
ø36h8
a
ø5.5
20
d g7
11.8
ø0.07 A
M12x1
Square flange, cable radial
8.64
ø10
9.
7.62
□63.5
(6.48)
□52.4
A
53
a
d g7
15
33.9
14.1
ø5.5
ø9.525
ø36h8
a
ø58
20
d g7
ø0.03 A
ø0.07 A
11.8
5
www.baumer.com/motion
7/1/2016
Subject to modification in technic and design. Errors and omissions excepted.
ø0.03 A
Incremental encoders
Solid shaft with square flange
100…5000 pulses per revolution
EIL580 - square flange - OptoPulse®
Dimensions
Square flange, flange connector M23, axial
ø10
9.
14.1
□63.5
7.62
(6.48)
□52.4
A
M23x1
a
d g7
15
26
ø5.5
8.64
33.9
ø58
ø9.525
20
8.5
a
ø36h8
d g7
ø0.03 A
ø0.07 A
Square flange, flange connector M12, axial
9.
7.62
(6.48)
□52.4
A
ø58
M12x1
a
d g7
15
□63.5
ø0.03 A
Subject to modification in technic and design. Errors and omissions excepted.
ø10
22
ø0.07 A
Square flange, cable axial
ø10
9.
7.62
a
d g7
15
~23
□63.5
(6.48)
□52.4
A
ø5.5
8.64
33.9
14.1
ø58
ø9.525
ø36h8
a
~11
20
d g7
ø0.03 A
ø0.07 A
6
www.baumer.com/motion
7/1/2016
8.64
33.9
14.1
ø5.5
ø9.525
ø36h8
a
~11
20
d g7
Incremental encoders
Solid shaft with square flange
100…5000 pulses per revolution
EIL580 - square flange - OptoPulse®
Dimensions
Square flange, cable tangential
ø9.525
8.64
ø10
9.
34.4
14.1
□63.5
7.62
(6.48)
□52.4
15
A
a
°
d g7
128
ø36h8
20
ø5.5
a
ø58
d g7
ø0.03 A
ø0.07 A
Subject to modification in technic and design. Errors and omissions excepted.
.5
7
www.baumer.com/motion
7/1/2016
19
Similar pages