ARJ45® Category 7a Connectors The ARJ45® is Stewart’s family of connectors for Category 7 and Category 7a premise wiring systems deployed in 10GBase-T Ethernet and higher speed data transmission environments. This connector family consists of a cable-mounted plug and a single-port, PCB-mounted jack designed to meet Category 7a performance standards up to 1000 MHz as defined by the IEC60603-7-71. Additionally, the ARJ45® can be used as a high speed connector replacement for closed loop applications currently using less economical connector types. Stewart’s ARJ45® connector systems provide a competitive advantage in that they are built on the proven reliability of standard RJ45 interface mechanics which have been enhanced to support increased Category 7a data speeds. In addition, the ARJ45® connectors are interfacecompatible with the Nexans’ GG45 connector system. This makes the ARJ45® / GG45 connector system a proven intermatable connector solution for Category 7 and Category 7a that is commercially available today from two independent manufacturing sources. Key Features & Benefits ARJ45® Jack Part Number SS-77100-004 Description Single port, horizontal, and shielded ARJ45® Cable Assemblies Part Number Description CA77-010M0-2 10 meter cable assembly CA77-007M0-2 7 meter cable assembly CA77-005M0-2 5 meter cable assembly CA77-003M0-2 3 meter cable assembly CA77-002M0-2 2 meter cable assembly CA77-001M0-2 1 meter cable assembly • Meets IEC 60603-7-71 standard for Category 7a performance up to 1000 MHz • Right angle PCB jack available for Category 7a patch panel designs and high speed active equipment applications • Meets IEC 60603-7-7 standard for Category 7 performance up to 600 MHz • Uses data transmission pair isolation techniques to achieve high frequency • Performance capability up to 3GHz performance • Meets the industry standard mechanical • Plug design includes a built-in strain relief interface as defined by IEC 61076-3-110 boot as well as an anti-snag feature for plug tab protection • Interface compatible with the Nexans’ GG45 connectors RoHS Compliant Stewart Connector 11118 Susquehanna Trail South +1 717.235.7512 [email protected] Glen Rock, PA 17327-9199 USA stewartconnector.com © 2015 Bel Connector, Inc. US/LIT-ARJ45v06.15 ARJ45® Category 7a Connectors Typical Mechanical Dimensions of ARJ45® PCB Jacks Front View ARJ45® Category 7a Application Performance Data ARJ45 Category 7a ReturnARJ45 LossCategory 7a Return Loss Side View 0.0 0.530 [13.46] 0.055 ±0.020 [1.40 ±0.51] 0.055 ±0.020 [1.40 ±0.51] -10.0 -15.0 -20.0 -25.0 0.125 signal and [3.17] LED leads Return Loss (dB) 0.600 [15.24] -5.0 -30.0 -35.0 -40.0 -45.0 -50.0 -55.0 -60.0 -65.0 0.290 [7.37] 0.560 [14.22] 0.678 [17.23] -70.0 -75.0 0.155 [3.94] ground leads -80.0 1 (MHz) 10 45 .170 [4.32] .120 [3.05] .145 [3.68] -60.0 1 -70.0 ø.006 [ø0.15] 3 .110 [2.79] max 2 -80.0 NEXT (dB) 8 3 x ø.062 [ø1.57] 6 4 7 .308 [7.81] Limit -50.0 8 x ø.035 [ø0.89] ø.006 [ø0.15] 5 .140 [3.56] 78 ARJ45 Category 7a Mated NEXT .340 [8.64] 2 x .040 [1.02] 36 1000 ARJ45 Category 7a Mated NEXT 2 x .050 [1.27] .215 [5.46] .265 [6.73] PCB Recommended Hole Layout 12 100 -90.0 -100.0 Front edge of PCB .240 [6.10] .615 [15.62] PCB Recommended Hole Layout Seen From Component Side -110.0 -120.0 -130.0 1 10 45-12 For more information on these products consult XXXXXXXX. All centerline dimensions are basic. RoHS Compliant 45-36 100 Frequency MHz 45-78 12-36 12-78 1000 36-78 LIMIT Stewart Connector 11118 Susquehanna Trail South +1 717.235.7512 [email protected] Glen Rock, PA 17327-9199 USA stewartconnector.com © 2015 Bel Connector, Inc. US/LIT-ARJ45v06.15