Download

New Products
Indicator (Square) Ultra Bright LED Type
M2S
Indicator Series with Square 40-mm
Body.
New models added with Ultra LEDs.
• New models with ultra bright LEDs added to singlescreen
models.
• Previous models not changed.
Line up of models in seven colors (the previous red, orange,
green, and white models, and the new yellow, blue, and pure
white models).
Refer to Safety Precautions for All Pushbutton Switches/
Indicators and Safety Precautions in the A3S datasheet.
List of Models
Indicators
Appearance
Model
Rectangular
M2SJ
Square
M2SA
1
M2S
Model Number Structure
Model Number Legend ....... The model numbers used to order sets of Units are illustrated below. One set comprises the Display, Lamp,
and Socket Unit.
For information on combinations, refer to Ordering Information on page 3.
(1)
(2)
(3)
(4)
M2S J - 90A 1 - 24S R
(1) Shape of Display
Symbol
J
A
Shape
Rectangular
Square
(2) Screen Pattern
Illumination-only models
Symbol
Screen pattern
Single screen
1
Symbol
Color
Color of plate
LED
Color of
screen
2
R
Red
Red
Red
Y
Yellow
Yellow
Pure White
(3) Lighting Method
LED-lighted Models
(4) Color of Operation Unit
Symbol
R
Y
G
W
O
A
PW
Symbol Rated voltage
05S
5 VDC
12S 12 VAC/VDC
24S 24 VAC/VDC
G
Green
Green
Green
W
White
White
Amber
O
Orange
Orange
Orange
Color
Red
Yellow
Green
White
Orange
Blue
Pure White
A
Blue
Blue
Blue
PW
Pure White
White
Pure White
M2S
Ordering Information
Ordering as a Set .................The model numbers used to order sets of Units are given in the following tables. One set comprises the
Operation Unit, Lamp, and Socket Unit.
Rectangular M2SJ
Rectangular Models
Single screen
Case color
Black
Lighting method
LED lamp
(1)
5 VDC
M2SJ-90A1-05S(1)
12 VAC/DC
M2SJ-90A1-12S(1)
24 VAC/DC
M2SJ-90A1-24S(1)
Lamp holder color symbol
(color)
R, O, G, W, Y, A, or PW
Note: Enter the desired color symbol for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White, (Y) = Yellow, (A) = Blue, (PW) = Pure White.
Example: Red M2SJ-90A1-24S R
Square M2SA
Square Models
Case color
Black
Lighting method
LED lamp
(1)
Single screen
5 VDC
M2SA-90A1-05S(1)
12 VAC/DC
M2SA-90A1-12S(1)
24 VAC/DC
M2SA-90A1-24S(1)
Lamp holder color symbol
(color)
R, O, G, W, Y, A, or PW
Note: Enter the desired color symbol for the Pushbutton in (1). (R) = Red, (O) = Orange, (G) = Green, (W) = White, (Y) = Yellow, (A) = Blue, (PW) = Pure White.
Example: Red M2SA-90A1-24S R
Accessories, Replacements, and Tools
The accessories, replacements, and tools are the same as those for the A3S. Refer to the A3S datasheet.
Specifications
Approved Standard Ratings
UL (File No. E41515), CSA (File No. LR45258)
LED: 24 VDC max.
Note: Certification has been obtained for the Indicator.
For detailed information on individual products that have received certification, consult your supplier.
Ratings
Ambient operating
temperature
−10 to 50°C
(with no icing or condensation)
Ambient operating
humidity
35% to 85%RH
Ambient storage
temperature
−25 to 65°C
(with no icing or condensation)
LED Lamp Ratings
Operating
voltage
5 VDC ±5%
12 VAC/VDC ±5%
24 VAC/VDC ±5%
Rated voltage
Rated current
5 VDC
12 VAC/VDC
24 VAC/VDC
8 mA
3
M2S
Nomenclature
Model Structure
Rectangular
M2SJ
Square
M2SA
Single
screen
Single
screen
Color cap
Legend plate
Diffusion plate
Operation Unit
Socket Unit
Dimensions
(Unit: mm)
Rectangular Models (M2SJ)
OMRON logo
Square Models (M2SA)
0.5
0.5
15.8±0.2
13.2
19.1 22±0.2
19.4
OMRON logo
1.8
1.2
17.8±0.2
24±0.2
4.2
17.8±0.2
15.8±0.2
2.8
13.2
1.8±0.1
17.8±0.2
Tab terminal #110
4.2
32.5
40
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Recommended panel thickness: 1 to 4 mm
Terminal Connections (All are shown with the OMRON logo facing down.)
LED-lighted Models
Type
Model
Rectangular Models (M2SJ)
Bottom View
Top View
Terminal
arrangement
Lighting block
Square Models (M2SA)
Bottom View
Top View
Indicator
4
Terminal
arrangement
Lighting block
15.8±0.2
2.8
13.2
1.8±0.1
32.5
40
Tab terminal #110
M2S
Dimensions
Panel Cutout
(Unit: mm)
(If you use a Switch Guard or Seal Cover, refer to Switch and Guard Mounting Dimensions or Seal Cover Mounting
Dimensions in the A3S datasheet.)
M2SJ
Classification
Individual mounting, horizontal
Mounting design
Panel cutout
16.2±0.2
17.8±0.2
Flange mount models
24±0.2
Multiple mounting,
horizontal
17.8±0.2
22.4±0.2
1
2
Panel cutout spacing between rows of
Units:
16.2±0.2
n
24n −1.6±0.2
24n±0.5
Individual mounting, vertical
Mount to Long
Mounting Plate (A3SJ3002) before use.
24±0.2
24±0.2
1
6 min.
16.2±0.2
2
n
Mount to Long
Mounting Plate (A3SJ3002) before use.
22.4±0.2
17.8n±0.5
Individual mounting, horizontal
17.8n −1.6±0.2
16.2±0.2
19.8
26.9±0.2
Barrier mount models
29.7
Multiple mounting,
horizontal
1
19.8
2
26
1
20.7±0.2
2
n
Mount to Long
Mounting Plate (A3SJ3002) before use.
4 min.
6 min.
22.4±0.2
23.5
Multiple mounting,
vertical
1.4
25.3n +1.6±0.2
Mount to Long
Mounting Plate (A3SJ3002) before use.
26
Panel cutout spacing between rows of
Units:
16.2±0.2
n
25.3n +4.4
Individual mounting, vertical
3 min.
22.4±0.2
17.8±0.2
Multiple mounting,
vertical
Remarks
(Dotted line indicates the position of
each Mounting Barrier.)
22.4±0.2
19.1n +1.6±0.2
19.1n +4.4
Note: If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating.
M2SA
Flange mount models
Classification
Individual mounting
Mounting design
Panel cutout
Remarks
Panel cutout spacing between rows of Units:
16.2±0.2
17.8±0.2
3 min.
16.2±0.2
17.8±0.2
6 min.
Multiple mounting
17.8±0.2
1
2
3
16.2±0.2
n
17.8n −1.6±0.2
17.8n±0.5
Barrier mount models
Panel cutout spacing between rows of Units:
Individual mounting
16.2±0.2
19.8
1.4
4 min.
20.7±0.2
23.5
6 min.
Multiple mounting
19.8
1
2
3
19.1n + 4.4
n
16.2±0.2
19.1n + 1.6±0.2
(Dotted line indicates the position of each
Mounting Barrier.)
Note: If the panel is to be finished (e.g., coated), make sure that the panel meets the specified dimensions after the coating.
5
M2S
Safety Precautions
Refer to Safety Precautions for all Pushbutton Switches/Indicators for common precautions.
Read the Safety Precautions in the A3S datasheet.
6
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have
any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing
by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE
PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL
SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products
or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election,
to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the
non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price
of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other
claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored,
installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or
unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system
assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in
writing, are not to be construed as an amendment or addition to the above warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it
to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice
to change part numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be
assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to
confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
OMRON Corporation
Industrial Automation Company
Authorized Distributor:
Tokyo, JAPAN
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Wegalaan 67-69-2132 JD Hoofddorp
The Netherlands
Tel: (31)2356-81-300/Fax: (31)2356-81-388
OMRON ELECTRONICS LLC
One Commerce Drive Schaumburg,
IL 60173-5302 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
© OMRON Corporation 2013 All Rights Reserved.
In the interest of product improvement,
specifications are subject to change without notice.
Printed in Japan
Cat. No. A232-E1-01
0913 (0913)
Similar pages