Download

IPKVM-310(Ver. 1.0)
DATA SHEET
16x16 Multicast supportable HDMI/DVI IP KVM Extender
IPKVM-310-ED
Contents
 Description
 Features
 Supporting Video Resolutions for Input / Output
 Applications
 Technical Specification
 EMC Test
 Connection Diagram
 Block Diagram
OPTICIS HQ
Headquarters
Opticis Co., Ltd.
# 16Fl, Kins Tower
8 Sungnam-daero, 331 beon-gil,
Bundang-gu,
Seongnam-si, Gyunggi-do, 463-844
South Korea
Te l: +82 (31) 719-8033
Fax: +82 (31) 719-8032
www.opticis.com
Copyright © 2014, All rights reserved by Opticis
-1-
6, OCT. 2014
IPKVM-310(Ver. 1.0)
 Description
The IPKVM Extender, IPKVM-310ED is designed for extending of HDMI video, keyboard and
mouse. IPKVM-310ED, composed of pairs of transmitters and receivers, works in conjunction to
provide unicast (1 to 1) or multicast (16 to 16) streaming over an IP network. The transmitter,
IPKVM-310E (Encoder,Tx), connected to a HDMI PC source, encodes the video signal by H.264
and transmits the video signal via Ethernet. The receiver, IPKVM-310D (Decoder,Rx), connected
to a display monitor, receives the H.264 encoded video signal via the Ethernet and decodes video
signal for HDMI display. The USB keyboard and mouse interface in the remote receiver, IPKVM310D, also can be accessed to the source via transmitter IPKVM-310E, if it is connected to the
source by USB interface.
The IPKVM-310-ED supports the digital video data of full HD up to 1920x1080p at 60Hz and
stereo audio and transmits the signal via Internet / Intra network. It also enables to distribute
sixteen (16) video sources up to sixteen (16) displays in the multi-screen mode or the singlescreen HD mode on the remote displays and makes sixteen (16) local keyboard and mouse
accesses to the source. By using GUI interface and PC program, user can control the
transmitters for connecting in the receiver side. With these key features, 16 x 16 IP routing
system can be configured.
 Features
• LAN standard: 802.3 Ethernet 10/100Mbps
• Video Resolution: up to [email protected]
• Monitoring Mode: 640x480, 16CH Multi-screen
• HID KVM mode: 1920x1080, 1CH Single-screen with HID Keyboard/Mouse
• H.264 CODEC
• OSD GUI, Multi-screen mode / Single-screen HD mode supported
• Remote Manager: PC Program for User Setting & Control
• HDMI V1.3, DVI 1.0
• USB KVM via backchannel: USB HID mouse & keyboard on remote site (Rx) or local site (Tx)
• IPKVM-310E (Transmitter,Tx): Power Jack, RJ45, HDMI Input /HDMI Output (Loop-through) and mini
USB port/Dual USB port
• IPKVM-310D (Receiver,Rx): Power Jack, RJ45, HDMI Output and Dual USB ports
Copyright © 2014, All rights reserved by Opticis
-2-
6, OCT. 2014
IPKVM-310(Ver. 1.0)
 Supporting Video Resolutions for Input / Output (TBD)
IPKVM-310ED supports 3 kinds of resolutions and you have to fix one of them for same
EDID. So a group of Rxs and Txs must have same resolution to display videos of Txs on
16ch multi-screen of Rxs.
• 1280x720p60
• 1280x10240p60
• 1920x1080p60
Note: Some DVI resolutions may not be shown properly on the display. The image would be
shifted to one side.
 Applications
• Home AV
• KVM
• Video control room
• Digital signage
• Medical imaging
Copyright © 2014, All rights reserved by Opticis
-3-
6, OCT. 2014
IPKVM-310(Ver. 1.0)
 Technical Specification
- General Specification
Item
Display mode
Description
Multi-screen mode(16CH): VGA, 16CH simultaneously Monitoring mode
Single-screen HD mode(1CH):1920x1080, 1CH HID KVM mode
Network(LAN)
10/100 Base-T Ethernet: TCP/IP based wired network with CAT5e/ CAT6 Cables
Video Streaming protocol
RTSP, RTP, RTCP, UDP / TCPIP
Video Codec
MPEG-4 Part 10/AVC (H.264)
Resolution
Up to [email protected]
Video Interface Standard
HDMI 1.3 and DVI1.0
Tx Video Interface
Input: 1 HDMI/DVI Input
Output: 1 HDMI/DVI Output (Loop-Through )
Rx Video Interface
Output: 1 HDMI/DVI Output
Keyboard/Mouse (Tx)
1x mini USB B type to PC
Keyboard /Mouse (Rx)
2x USB USB A type ( for Remote HID Keyboard/Mouse)
LAN Port
RJ-45 (Tx/Rx 1 port)
RS232 Port
3 Pin Terminal Block for Knob & alarm interface
Digital I/O Port
Terminal Block for Console Switch & Console Indicator
3 Stage Slide Switch(Tx)
Local/Remote/Console for Control Authority
Reset Switch
SW reset & Factory reset
External Console Switch
When 3-State Slide Switch set with console, you can select Local/Remote authority
(Tx, Optional)
on the switch pad externally.
External Console Indicator
When 3-State Slide Switch set with console, you can check Local/Remote authority
(Rx, Optional)
on the pad externally with LED status.
Configuration access
2x USB A type (for Local HID Keyboard/Mouse)
OSD GUI via Mouse/Keyboard
PC Program (Remote Manager) for user account, device setting, status monitoring
EDID
Built-in EDID & EDID Read/Write
Dimension
Tx: 112x28x104mm (WHD), Rx: 112x28x104mm (WHD)
Power
100-240VAC, 50-60Hz
5V 3A Adaptor
Power Consumption
Transmitter <10W
Operating Temperature
0~50°C
Storage Temperature
-20~60°C
Certification
FCC, CE
Copyright © 2014, All rights reserved by Opticis
-4-
Receiver <10W
6, OCT. 2014
IPKVM-310(Ver. 1.0)
- Electrical Characteristics
Power Supply
Parameter
Supply Voltage, Temp 25°C
Tx
Rx
Tx
Rx
Supply Current
Power Dissipation
TMDS
Ethernet
Link
Data Output Load
Graphic Supply Voltage
Single-Ended High Level
Input Voltage
Single-Ended Low Level
Input Voltage
Single-Ended Input Swing
Voltage
Maximum Bit rate
Network Speed
RGMII/GMII
Symbol
VCC
ITCC
IRCC
PTX
PRX
RLD
GVCC
Minimum
+ 4.75
5.5
5
Maximum
+ 5.25
7.5
7
+ 3.15
Typical
+ 5.0
2
2
6.5
6
50
+ 3.3
+ 3.45
Units
V
A
A
W
W
Ω
V
GVIH
GVCC - 0.01
GVCC
GVCC + 0.01
V
GVIL
GVCC - 0.6
-
GVCC - 0.4
V
GVISWING
0.2
-
0.75
V
40
10/100
Mbps
Mbps
2.8
V
-0.2
(TA = 0 C to +50 C, unless otherwise noted)
- HDMI Pin Description
Pin
Symbol
Functional Description
1
CH2+
TMDS Data Signal Channel 2 Positive
2
GND
TMDS Data Signal Channel 2 Shield
3
Ch2-
TMDS Data Signal Channel 2 Negative
4
CH1+
TMDS Data Signal Channel 1 Positive
5
GND
TMDS Data Signal Channel 1 Shield
6
CH1-
TMDS Data Signal Channel 1 Negative
7
CH0+
TMDS Data Signal Channel 0 Positive
8
GND
TMDS Data Signal Channel 0 Shield
9
CH0-
TMDS Data Signal Channel 0 Negative
10
CLK+
TMDS Clock Channel Positive
11
GND
TMDS Clock Signal Shield
12
CLK-
TMDS Clock Channel Negative
13
CEC
Consumer Electronics Control
14
Reserved
Not used
15
SCL
HDCP/DDC communication clock
16
SDA
HDCP/DDC communication data
17
GND
DDC/CEC shield
18
5V
19
Hot plug
Detect
5 V Input for Transmitter from Host
5 V Output for Monitor from Receiver
Signal is driven by monitor to enable the system to identify the presence of a
monitor
Copyright © 2014, All rights reserved by Opticis
-5-
6, OCT. 2014
IPKVM-310(Ver. 1.0)
- Absolute Maximum Ratings
Parameter
Symbol
Minimum
Maximum
Units
Supply Adaptor Voltage, Temp=25°C
VCC
-0.3
+5.25
V
Operating Temperature
Top
0
50
C
Operating Relative Humidity
RHop
5
85*
%RH
Storage Temperature
Tsto
- 20
+ 60
C
Storage Relative Humidity
RHsto
10
95*
%RH
- Recommended Operating Conditions
Parameter
Symbol
Minimum
Ambient Operating Temperature
TA
0
Data Output Load (HDMI)
RLD
50
Ω
Power Supply Rejection (Note1)
PSR
100
mVp-p
Supply Voltage
VCC
+ 4.75
Typical
+ 5.0
Maximum
Units
+ 50
C
+ 5.25
V
 EMC Test
- EMI: Meet FCC class A or B (ICES-003) and CE class A or B
STANDARDS
EN 55 022 (CISPR22)
CE (Conducted Emission) &
FCC; PART 15 SUBPART B
RE (Radiated Emission)
EN 61000-3-2 (IEC 61000-3-2)
Harmonics
EN 61000-3-3 (IEC 61000-3-3)
Flickers
CONDITIONS
Meet Class A or B
Meet Class A or B
Meet Class A or B
- EMS: Meet CE standards (EN 55024) and CISPR24 equivalents
EN 61 000-4-2:1995
EN 61 000-4-3:1996
EN 61 000-4-4:1995
EN 61 000-4-5:1995
EN 61 000-4-6:1996
EN 61 000-4-11:1994
STANDARDS
Electrostatic Discharge Immunity
(Air: 8kv, Contact: 4kv)
Radiated RF E-Field (80~1000 MHz)
3V/m (AM 80%, 1kHz)
Fast Transients (5kHz, 60Seconds)
Surge Transients
Conducted Susceptibility (CS)
Radiated Susceptibility (RS)
Voltage Dips, Interruption & Variation
Copyright © 2014, All rights reserved by Opticis
-6-
CONDITIONS
Meet Criterion A or B
Meet Criterion A or B
Meet Criterion A or B
Meet Criterion A or B
Meet Criterion A or B
Meet Criterion A or B, and C
6, OCT. 2014
IPKVM-310(Ver. 1.0)
 Connection Diagram
Copyright © 2014, All rights reserved by Opticis
-7-
6, OCT. 2014
IPKVM-310(Ver. 1.0)
 Block Diagram
Transmitter, IPKVM-310E: Internal schematic circuit diagram & I/O port
mini
USB
USB port
Interface
(for HID)
Block
Ethernet
Main CPU
PHY
RJ45
(for LAN)
& CODEC
B type
USB port
HDMI
HDMI OUT
Tx chip
(for Local Display)
HDMI
HDMI IN
Rx chip
(for Video Input)
(for SVC)
3pin
3pin T.B
Interface
(for DIO)
Block
RS232
3pin T.B
(for RS232)
Interface
NAND
DDR(*4)
Block
Memory
Memory
Block
Block
Copyright © 2014, All rights reserved by Opticis
-8-
Power
circuit
Reset button
5V DC Input
Block
6, OCT. 2014
IPKVM-310(Ver. 1.0)
Receiver, IPKVM-310D : Internal schematic circuit diagram & I/O port
Ethernet
Main CPU
PHY
& CODEC
RJ45
(for LAN)
HDMI
HDMI OUT
Tx chip
(for Remote Monitor)
Main CPU
& CODEC
3pin T.B
(for DIO)
3pin T.B
(for RS232)
USB
3pin
interface
interface
Block
USB Dual port
(for HID K/M)
Block
Reset button
RS232
interface
NAND
DDR(*4)
Power
Block
Memory
Memory
Block
Block
circuit
Copyright © 2014, All rights reserved by Opticis
-9-
5V DC Input
Block
6, OCT. 2014
Similar pages