dsot0502.pdf

05369
DSOT0502
Only One Name Means ProTek’Tion™
LOW CAPACITANCE TVS ARRAY
Description
The DSOT0502 is a low capacitance transient voltage suppressor array, designed to protect computer interfaces and portable electronics from the damaging effects of
Electrostatic Discharge and Electrical Fast Transients.
The DSOT0502 meets IEC 61000-4-2 (ESD) and IEC 61000-4-4 (EFT) requirements. At higher operating frequencies or faster edge rates, insertion loss and signal integrity are a major concern. This device offers a low capacitance and low leakage current in a miniature SOT-883 package.
Features
applications
• Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
• Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns
• 25 Watts Peak Pulse Power per Line (tp = 8/20µs)
• Low Clamping Voltage
• Bidirectional Configuration
• Low Capacitance
• RoHS Compliant
• REACH Compliant
• SMART Phones
• Portable Electronics
• Control & Monitoring Systems
• Wireless Bus Protection
Mechanical characteristics
• Molded JEDEC SOT-883 Package
• Approximate Weight: 2 milligrams
• Lead-Free Nickel Paladium Gold
• Solder Reflow Temperature:
Nickel-Paladium-Gold: Ni/Pd/Au, 96/3.5/0.5: 260-270°C
• 8mm Tape and Reel Per EIA Standard 481
• Flammability Rating UL 94V-0
PIN CONFIGURATION
1
2
3
05369.R3 10/12
Page 1
www.protekdevices.com
05369
DSOT0502
Only One Name Means ProTek’Tion™
typical device characteristics
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
SYMBOL
VALUE
UNITS
PPP
25
Watts
Peak Pulse Power (tp = 8/20µs) - See Figure 1
TA
-55 to 150
°C
Storage Temperature
Operating Temperature
TSTG
-55 to 150
°C
Typical Forward Voltage @10mA, 300µs - Square Wave
VF
1.2
V
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
DSOT0502
05369.R3 10/12
device
marking
5U
RATED
STAND-OFF
VOLTAGE
MINIMUM
BREAKDOWN
VOLTAGE
MAXIMUM
CLAMPING
VOLTAGE
(Fig. 2)
MAXIMUM
CLAMPING
VOLTAGE
(Fig. 2)
VWM
VOLTS
@ 1mA
V(BR)
VOLTS
@I P = 1A
VC
volts
5.0
6.0
9.8
Page 2
MAXIMUM
LEAKAGE
CURRENT
TYPICAL
CAPACITANCE
@8/20µs
VC @ IPP
@VWM
ID
µA
@0V, 1MHz
C
pF
12.5V @ 2A
2
9
www.protekdevices.com
05369
DSOT0502
Only One Name Means ProTek’Tion™
typical device characteristics
figure 1
peak pulse power vs pulse time
PPP - Peak Pulse Power - Watts
1,000
100
25W, 8/20µs Waveform
10
1
0.1
1
10
100
td - Pulse Duration - µs
IPP - Peak Pulse Current - % of IPP
10,000
figure 2
pulse wave form
120
tf
100
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
Peak Value IPP
80
e-t
60
40
td = t/(IPP/2)
20
0
05369.R3 10/12
1,000
0
5
10
15
t - Time - µs
Page 3
20
25
30
www.protekdevices.com
05369
DSOT0502
Only One Name Means ProTek’Tion™
SOT-883 package information
outline dimensions
dim
millimeters
inches
min
max
min
max
A
0.40
0.50
0.016
0.020
A1
0.00
0.03
0.00
0.001
D
0.55
0.65
0.022
0.026
E
0.95
1.05
0.037
0.041
e
0.35 BSC
0.014 BSC
e1
0.65 BSC
0.026 BSC
b
0.12
0.18
0.005
0.007
b1
0.47
0.53
0.019
0.021
L
0.22
0.28
0.009
0.011
L1
0.22
0.28
0.009
0.011
b
Pin 1 Location
L
E
e1
L1
b1
D
TOP VIEW
BOTTOM VIEW
A
NOTEs
1. Dimensioning and tolerances per ANSI Y14.M, 1985.
2. Controlling dimension: millimeters.
3. Dimensions are exclusive of mold flash and metal burrs.
A1
SIDE VIEW
A
pad layout dimensions
millimeters
inches
nominal
nominal
A
0.20
0.008
A1
0.20
0.008
B
0.30
0.012
B1
0.30
0.012
C
0.40
0.016
D
0.15
0.006
E
0.55
0.022
F
0.70
0.028
dim
A1
B1
C
D
F
B1
E
NOTES
1. Controlling dimension: inches.
2. Decimal tolerances for mounting pad: ±0.003” (±0.08 mm).
05369.R3 10/12
Page 4
www.protekdevices.com
05369
DSOT0502
Only One Name Means ProTek’Tion™
TAPE AND REEL
D
T
P2
Top Cover
Tape
A0
F
Pin 1 Location
5U
5U
5U
5U
K0
10 Pitches Cumulative
Tolerance on tape ± 0.2
E
P0
W
B0
P
User Direction of Feed
specifications
Reel Dia.
Tape
Width
178mm (7”)
8mm
A0
B0
K0
D
E
F
W
P0
P2
P
0.70 ± 0.05 1.15 ± 0.10 0.56 ± 0.05 1.55 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.05
tmax
0.25
Notes
1.
2.
3.
4.
Dimensions are in millimeters.
Surface mount product is taped and reeled in accordance with EIA-481.
Suffix - T75 = 7” Reel - 5,000 pieces per 8mm tape.
Marking on Part - marking code (see page 2) and pin 1 designated by line.
Package outline, pad layout and tape specifications per document number 06099.R0 5/12.
ORDERING INFORMATION
base PART NUMBER
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE qty
DSOT0502
n/a
-T75
5,000
7”
n/a
This device is only available in a Lead-Free configuration.
05369.R3 10/12
Page 5
www.protekdevices.com
05369
DSOT0502
Only One Name Means ProTek’Tion™
company information
COMPANY PROFILE
In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of transient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products.
These TVS devices protect electronic systems from the effects of lightning, electrostatic discharge (ESD), nuclear electromagnetic pulses
(NEMP), inductive switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog
switches; multiplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of consumer; industrial; automotive and other applications.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: & Marketing: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
By Fax
General: 602-431-2288
By E-mail:
Sales: sales@protekdevices.com
Customer Service: service@protekdevices.com
Technical Support: support@protekdevices.com
ProTek Devices (Asia Pacific) Pte. Ltd.
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
Web
www.protekdevices.com
COPYRIGHT © ProTek Devices 2012 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
05369.R3 10/12
Page 6
www.protekdevices.com