PDF Obsolete Data Sheets

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC241QS16 / 241QS16E
v04.0404
Typical Applications
Features
The HMC241QS16 & HMC241QS16E are ideal for:
RoHS Compliant Product
• Base Stations & Portable Wireless
Low Insertion Loss (2 GHz): 0.5 dB
• CATV / DBS
Single Positive Supply: Vdd = +5V
• Wireless Local Loop
Integrated 2:4 TTL Decoder
• Test Equipment
16 Lead QSOP Package
Functional Diagram
General Description
The HMC241QS16 & HMC241QS16E are general
purpose low-cost non-reflective SP4T switches in
16-lead QSOP packages. Covering DC - 3.5 GHz,
this switch offers high isolation and has a low insertion
loss of 0.5 dB at 2 GHz. The switch offers a single
positive bias and true TTL/CMOS compatibility. A 2:4
decoder is integrated on the switch requiring only 2
control lines and a positive bias to select each path,
replacing 8 control lines normally required by GaAs
SP4T switches.
SWITCHES - SMT
10
Electrical Specifi cations, TA = +25° C, For TTL Control and Vdd = +5V in a 50 Ohm System
Parameter
Frequency
Min.
Typ.
Max.
Units
0.5
0.5
0.6
1.0
0.8
0.8
0.9
1.5
dB
dB
dB
dB
Insertion Loss
DC - 1.0 GHz
DC - 2.0 GHz
DC - 2.5 GHz
DC - 3.5 GHz
Isolation
DC - 1.0 GHz
DC - 2.0 GHz
DC - 2.5 GHz
DC - 3.5 GHz
40
32
28
23
45
36
32
26
dB
dB
dB
dB
Return Loss
“On State”
DC - 2.5 GHz
DC - 3.5 GHz
17
9
21
12
dB
dB
Return Loss
RF1-4 “Off State”
0.3 - 3.5 GHz
0.5 - 2.5 GHz
8
12
12
16
dB
dB
Input Power for 1dB Compression
0.3 - 3.5 GHz
22
25
dBm
Input Third Order Intercept
(Two-Tone Input Power = +7 dBm Each Tone)
0.3 - 3.5 GHz
40
44
dBm
Switching Characteristics
0.3 - 3.5 GHz
40
150
ns
ns
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
10 - 114
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 3.5 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC241QS16 / 241QS16E
v04.0404
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 3.5 GHz
Isolation
0
0
-0.5
-10
ISOLATION (dB)
INSERTION LOSS (dB)
Insertion Loss
-1
-1.5
+25 C
+85 C
-40 C
-2
RF1
RF2
RF3
RF4
-20
-30
-40
-50
-2.5
-60
-3
-70
0
1
2
3
4
0
1
2
FREQUENCY (GHz)
3
FREQUENCY (GHz)
10
SWITCHES - SMT
Return Loss
0
RFC
RF1-4 "On"
RF1-4 "Off"
RETURN LOSS (dB)
-5
-10
-15
-20
-25
-30
0
1
2
3
4
4
FREQUENCY (GHz)
Bias Voltage & Current
Truth Table
Vdd Range = +5.0 Vdc ± 10%
Control Input
Vdd
(Vdc)
Idd (Typ.)
(mA)
Idd (Max.)
(mA)
+5.0
4.0
7.0
TTL/CMOS Control Voltages
State
Bias Condition
Low
0 to +0.8 Vdc @ 5uA Typ.
High
+2.0 to +5.0 Vdc @ 70 uA Typ.
Signal Path State
A
B
RFCOM to:
LOW
LOW
RF1
HIGH
LOW
RF2
LOW
HIGH
RF3
HIGH
HIGH
RF4
NOTE:
DC Blocking capacitors are required at ports RFC and RF1, 2, 3, 4.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 115
HMC241QS16 / 241QS16E
v04.0404
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 3.5 GHz
Absolute Maximum Ratings
Bias Voltage Range (Port Vdd)
+7.0 Vdc
Control Voltage Range (A & B)
-0.5V to Vdd +1 Vdc
Channel Temperature
150 °C
Thermal Resistance
(Insertion Loss Path)
210 °C/W
Thermal Resistance
(Terminated Path)
250 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Maximum Input Power
Vdd = +5 Vdc
+20 dBm (0.05 - 0.5 GHz)
+27 dBm (0.5 - 3.5 GHz)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
10
SWITCHES - SMT
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Leadframe Plating
MSL Rating
HMC241QS16
Low Stress Injection Molded Plastic Silica
and Silicon Impregnated
Sn/Pb Solder
MSL1
HMC241QS16E
RoHS-compliant Low Stress Injection Molded
Plastic Silica and Silicon Impregnated
100% Matte Tin
MSL1
Package Marking [3]
[1]
HMC241
XXXX
[2]
HMC241
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
10 - 116
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC241QS16 / 241QS16E
v04.0404
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 3.5 GHz
Evaluation PCB
SWITCHES - SMT
10
List of Materials for Evaluation PCB 102913 [1]
Item
Description
J1 - J5
PCB Mount SMA RF Connector
J6 - J9
DC Pin
C1 - C5
330 pF capacitor, 0402 Pkg.
U1
HMC241QS16 / HMC241QS16E SP4T Switch
PCB [2]
102809 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should
have 50 ohm impedance and the package ground
leads should be connected directly to the ground
plane similar to that shown above. The evaluation circuit board shown above is available from
Hittite Microwave Corporation upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 117