TE Analog Devices Welcomes Hittite Microwave Corporation O B SO LE NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com TE O B SO LE THIS PAGE INTENTIONALLY LEFT BLANK HMC182S14 / 182S14E v03.0805 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 2 GHz Typical Applications Features The HMC182S14 / HMC182S14E is ideal for: Low Insertion Loss: 0.8dB • 800 - 1000 MHz Basestation Integrated 2:4 Decoder TE 14 Lead SOIC Package Functional Diagram General Description The HMC182S14 & HMC182S14E are low-cost terminated SP4T switches in 14-lead SOIC packages for use in antenna diversity, switched filter banks, gain/attenuation selection, and general channel multiplexing applications. The switch can control signals up to 2 GHz. A 2:4 decoder is integrated on the switch, requiring only 2 control lines and a negative bias to select each RF path. The 2:4 decoder replaces 4 to 8 control lines normally required by GaAs SP4T switches. The HMC182S14(E) are drop-in replacements for the HMC165S14 in applications requiring low “off state” VSWR. See positive bias / TTL SP4T HMC241QS16. B SO SWITCHES - SMT LE 10 Electrical Specifi cations, TA = +25° C, For 0/-5V Control and Vee = -5V in a 50 Ohm System Parameter Frequency Typ. Max. Units 0.7 0.8 1.1 1.2 dB dB DC - 1.0 GHz DC - 2.0 GHz Isolation DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz 41 36 28 45 40 32 dB dB dB DC - 1.0 GHz DC - 2.0 GHz DC - 1.0 GHz DC - 2.0 GHz 21 16 17 13 25 20 21 17 dB dB dB dB 22 24 dBm dBm 30 45 41 dBm dBm dBm 25 50 ns ns O Insertion Loss “On State” “On State” “Off State” “Off State” Return Loss Input Power for 1 dB Compression 50 MHz 0.5 - 2.0 GHz Input Third Order Intercept (Two-Tone Input Power = 7 dBm Each Tone). 50 MHz 0.5 - 1.0 GHz 0.5 - 2.0 GHz Switching Characteristics DC - 2.0 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 10 - 8 Min. 25 41 37 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC182S14 / 182S14E v03.0805 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 2 GHz Insertion Loss Isolation 0 0 ISOLATION (dB) -1 RF1 On RF2 On RF3 On RF4 On -1.5 -20 -30 -40 -50 -60 0 0.5 1 1.5 2 2.5 3 0 Return Loss 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) 10 LE FREQUENCY (GHz) Isolation Between Several RF l/Os 0 -20 -5 RFC RF1,2,3,4 On RF1,2,3,4 Off -30 -15 -20 -25 -30 -35 0 0.5 SO ISOLATION (dB) -10 1 1.5 2 2.5 3 RF1-2 RF4-1 -40 RF3-1 -50 -60 0 1 B FREQUENCY (GHz) Bias Voltage & Current O Vee Range = -5.0 Vdc ± 10% Control Input Iee (Typ.) (mA) Iee (Max.) (mA) -5.0 4.0 7.0 State 2 3 FREQUENCY (GHz) Truth Table Vee (Vdc) Control Voltages RF2-4 SWITCHES - SMT -2 RETURN LOSS (dB) RF1 Off RF2 Off RF3 Off RF4 Off TE INSERTION LOSS (dB) -10 -0.5 Signal Path State A B RFCOM to: High High RF1 Low High RF2 High Low RF3 Low Low RF4 Bias Condition Low 0 to -3 VDC @ 70 uA Typ. High -5 to -4.2 VDC @ 5 uA Typ. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 9 HMC182S14 / 182S14E v03.0805 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 2 GHz Absolute Maximum Ratings -7 Vdc Control Voltage Range (A & B) Vee -0.5V to +1.0 Vdc Channel Temperature 150 °C Thermal Resistance (Insertion Loss Path) 123 °C/W Thermal Resistance (Terminated Path) 260 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C Maximum Input Power +27 dBm (<500 MHz) +30 dBm (>500 MHz) LE 10 Outline Drawing O B SO SWITCHES - SMT ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS TE Bias Voltage Range (Port Vee) NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Leadframe Plating MSL Rating HMC182S14 Low Stress Injection Molded Plastic Silica and Silicon Impregnated Sn/Pb Solder MSL1 HMC182S14E RoHS-compliant Low Stress Injection Molded Plastic Silica and Silicon Impregnated 100% Matte Tin MSL1 Package Marking [3] [1] HMC182 XXXX [2] HMC182 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX 10 - 10 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC182S14 / 182S14E v03.0805 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 2 GHz 10 SWITCHES - SMT SO LE TE TTL Interface Circuit O B Note: Control inputs A and B can be driven directly with TTL logic with -5 Volts applied to theHCT logic gate Vee pin and to Vee (pin 10) of the RF switch. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 11 HMC182S14 / 182S14E v03.0805 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 2 GHz TE Evaluation PCB B SO SWITCHES - SMT LE 10 List of Materials for Evaluation PCB 101672 [1] Description O Item J1 - J5 PCB Mount SMA RF Connector J6 - J9 DC Pin C1 - C5 330 pF capacitor, 0402 Pkg. C6 - C8 10,000 pF capacitor, 0603 Pkg. U1 HMC182S14 / HMC182S14E SP4T Switch PCB [2] 101656 Evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 10 - 12 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC182S14 / 182S14E v03.0805 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 2 GHz SWITCHES - SMT 10 O B SO LE TE Notes: For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 13