Edco CATV-145A Series Installation Manual (IO-50147)

High Frequency Coax Protector – F-Type/N-Type
The Edco CATV-DF surge protectors are designed to protect sensitive electronic
equipment from damage due to excessive voltage or currents generated by
lightning or static build-up. It offers low signal loss at frequencies up to 2 gigahertz
and incorporates GDT (Gas Discharge Tube) technology. Applications include direct
broadcast satellite systems, HDTV, and cable modems.
General Technical Specifications
Operating Voltage
25 VDC
Clamping Voltage
150 VDC (Spark Over Voltage)
Operating Current
Peak Surge Current
Frequency Range
Insertion Loss
SPD Technology
Connection Type
Operating Temperature
Dimensions (Inches)
10 kA (8 x 20 µs)
0 to GHz
<1.0 dB at 1 GHz
<2.0 dB at 2 GHz
Gas Discharge Tube (GDT)
Type F Female
-40˚C to +85˚C
Automatic recovery
Low insertion loss
Shielded case
Easily installed
5 Year warranty
1.25H x 2.5W x 4L
3 oz.
Emerson Network Power Contact Information
Surge Protection
100 Emerson Parkway
Binghamton, NY 13905
T: (607) 721-8840
T: (800) 288-6169
F: (607) 722-8713
E: [email protected]
Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2014 Emerson Electric Co.
While every precaution has been taken to ensure accuracy and completeness herein, Emerson Network Power Surge Protection assumes no responsibility and disclaims all liability, for damages resulting
from use of this information or for any errors or omissions. Specifications are submect to change without notice.
IO-50147 4/14
Rev. 1