^^ϭϯϴtϭdϭ ϮϬϬŵEʹŚĂŶŶĞůWŽǁĞƌDK^&dͲϱϬs PRIMARY CHARACTERISTICS PD 380mW VDSS 50V ID 200mA rDS(ON) 3.5Ω SOT-363 150℃ TJ,Max 6 5 4 1 2 3 Device BSS138DW1T1 FEATURES Marking Shipping J1 3000 Tape & Reel 3 2 1 D2 G1 S1 S2 G2 D1 4 5 6 MECHANICAL DATA Typical applications are dc–dc Case：Molded plastic,SOT-363 converters, power management Polarity：As Above Marked inportable and battery–powered Terminals :Plated terminals, products such as computers, solderable per MIL-STD-750,Method printers,PCMCIA cards, cellular and 2026 cordless telephones. PACKAGE Epoxy : UL94-V0 rated flame Low Threshold Voltage (VGS(th): retardant 0.5V...1.5V) makes it ideal for lowvoltage applications Miniature 627 Surface Mount Package saves board space MAXIMUM RATINGS (TA = 25 o C unless otherwise noted) Symbol Value Unit VDSS 50 Vdc Gate–to–Source Voltage – Continuous VGS ± 20 Vdc Drain Current – Continuous @ TA = 25°C – Pulsed Drain Current (tp ≤ 10 µs) ID IDM 200 800 Total Power Dissipation @ TA = 25°C PD 380 mW Operating and Storage Temperature Range TJ, Tstg – 55 to 150 °C RθJA 328 °C/W TL 260 °C Rating Drain–to–Source Voltage Thermal Resistance – Junction–to–Ambient Maximum Lead Temperature for Soldering Purposes, for 10 seconds 2015.02 mA www.willas.com.tw Rev.L0ϭ P1 ^^ϭϯϴtϭdϭ ϮϬϬŵEʹŚĂŶŶĞůWŽǁĞƌDK^&dͲϱϬs ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Characteristic Min Typ Max Unit 50 – – Vdc – – – – 0.1 0.5 OFF CHARACTERISTICS V(BR)DSS Drain–to–Source Breakdown Voltage (VGS = 0 Vdc, ID = 250 µAdc) µAdc Zero Gate Voltage Drain Current (VDS = 25 Vdc, VGS = 0 Vdc) (VDS = 50 Vdc, VGS = 0 Vdc) IDSS Gate–Source Leakage Current (VGS = ± 20 Vdc, VDS = 0 Vdc) IGSS – – ±0.1 µAdc Gate–Source Threshold Voltage (VDS = VGS, ID = 1.0 mAdc) VGS(th) 0.5 – 1.5 Vdc Static Drain–to–Source On–Resistance (VGS = 2.75 Vdc, ID < 200 mAdc, TA = –40°C to +85°C) (VGS = 5.0 Vdc, ID = 200 mAdc) rDS(on) – – 5.6 – 10 3.5 ON CHARACTERISTICS (Note 1.) Ohms DYNAMIC CHARACTERISTICS Input Capacitance (VDS = 25 Vdc, VGS = 0, f = 1 MHz) Ciss – 42 – Output Capacitance (VDS = 25 Vdc, VGS = 0, f = 1 MHz) Coss – 15 – Transfer Capacitance (VDG = 25 Vdc, VGS = 0, f = 1 MHz) Crss – 3 – td(on) – 5 – td(off) – 7 – pF SWITCHING CHARACTERISTICS (Note 2.) Turn–On Delay Time Turn–Off Delay Time (VDD = 30 Vdc, ID = 0.2 Adc,) ns 1. Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2%. 2. Switching characteristics are independent of operating junction temperature. 2015.02 www.willas.com.tw Rev.L0ϭ P2 ^^ϭϯϴtϭdϭ ϮϬϬŵEʹŚĂŶŶĞůWŽǁĞƌDK^&dͲϱϬs Typical Characteristics (TA =25℃ Noted) 2015.02 www.willas.com.tw Rev.L0ϭ P3 ^^ϭϯϴtϭdϭ ϮϬϬŵEʹŚĂŶŶĞůWŽǁĞƌDK^&dͲϱϬs Typical Characteristics (TA =25℃ Noted) 2015.02 www.willas.com.tw Rev.L0ϭ P4 ^^ϭϯϴtϭdϭ ϮϬϬŵEʹŚĂŶŶĞůWŽǁĞƌDK^&dͲϱϬs Outline Drawing .004(0.10)MIN. SOT-363 .096(2.45) .071(1.80) .054(1.35) .045(1.15) .087(2.20) .071(1.80) .030(0.75) .021(0.55) .010(0.25) .003(0.08) .056(1.40) .047(1.20) .016(0.40) .004(0.10) .043(1.10) .032(0.80) .004(0.10)MAX. Dimensions in inches and (millimeters) 2015.02 www.willas.com.tw Rev.D Rev.L0ϭ P5 ^^ϭϯϴtϭdϭ ϮϬϬŵEʹŚĂŶŶĞůWŽǁĞƌDK^&dͲϱϬs Suggested Soldering Pad Layout SOT-363 .026(0.65) .075(1.90) .023(0.60) .015(0.40) Dimensions in inches and (millimeters) 2015.02 www.willas.com.tw RevB Rev.L0ϭ P6 ^^ϭϯϴtϭdϭ ϮϬϬŵEʹŚĂŶŶĞůWŽǁĞƌDK^&dͲϱϬs Packaging Information Small Signal Devices Reel Taping Specification REEL TAPING SPECIFICATION FOR SOT-363 DEVICES 8 mm . . . . . . . 7.7 8.3 3.90 4.10 1.55 1.65 P0 d P1 E F B W P D2 D1 T C D ITEM Carrier length Carrier depth Sprocket hole Reel outside diameter Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width Reel width 2015.02 W1 SYMBOL SPECIFICATIONS(mm) SPECIFICATIONS(inch) B C d D D1 D2 E F P P0 P1 T W W1 4.5max. 2.4max. 1.5± 0.1 178max. 50min. 13.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 4.0±0.1 2.0±0.05 0.4max. 8.0±0.3 14.4max. 0.177max. 0.094max. 0.061± 0.004 7max. 1.969min. 0.512±0.008 0.069±0.004 0.1378±0.002 0.157±0.004 0.157±0.004 0.079±0.002 0.016max. 0.315±0.012 0.567max. www.willas.com.tw Rev.L0ϭ P7 ^^ϭϯϴtϭdϭ ϮϬϬŵEʹŚĂŶŶĞůWŽǁĞƌDK^&dͲϱϬs Ordering Information: Device PN BSS138DW1T (1)1 H(2) ‐WS Note: (1) Packing code, Tape & Reel Packing Packing Tape&Reel: 3 Kpcs/Reel (2) Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2015.02 www.willas.com.tw Rev.L0ϭ P8