VS-ETX1506-M3, VS-ETX1506FP-M3 www.vishay.com Vishay Semiconductors Hyperfast Rectifier, 15 A FRED Pt® FEATURES • Hyperfast recovery time, extremely low Qrr • Low forward voltage drop • 175 °C operating junction temperature • Low leakage current 2L TO-220AC • Fully isolated package (VINS = 2500 VRMS) 2L TO-220 FULL-PAK • True 2 pin package • Designed and qualified according to JEDEC®-JESD 47 Base cathode 2 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 3 Anode 1 Cathode DESCRIPTION / APPLICATIONS 2 Anode 1 Cathode VS-ETX1506FP-M3 State of the art hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, hyperfast recovery time, and soft recovery. Package 2L TO-220AC, 2L TO-220FP IF(AV) 15 A The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. VR 600 V VF at IF 1.55 V VS-ETX1506-M3 PRODUCT SUMMARY trr (typ.) 18 ns TJ max. 175 °C Diode variation Single die These devices are intended for use in PFC boost stage in the AC/DC section of SMPS, inverters or as freewheeling diodes. The extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Peak repetitive reverse voltage TEST CONDITIONS VALUES UNITS 600 V VRRM Average rectified forward current in DC IF(AV) FULL-PAK Non-repetitive peak surge current IFSM Operating junction and storage temperatures TC = 141 °C 15 TC = 71 °C TJ = 25 °C A 120 TJ, TStg -65 to +175 °C ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage SYMBOL VBR, VR TEST CONDITIONS MIN. TYP. MAX. 600 - - IF = 15 A - 2.5 3.4 IF = 15 A, TJ = 150 °C - 1.55 2 VR = VR rated - 0.02 36 TJ = 150 °C, VR = VR rated - 40 250 IR = 100 μA UNITS V Forward voltage VF Reverse leakage current IR Junction capacitance CT VR = 600 V - 12 - pF Series inductance LS Measured lead to lead 5 mm from package body - 8 - nH μA Revision: 15-Jun-15 Document Number: 93549 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ETX1506-M3, VS-ETX1506FP-M3 www.vishay.com Vishay Semiconductors DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL Reverse recovery time trr MIN. TYP. MAX. IF = 1 A, dIF/dt = 100 A/μs, VR = 30 V TEST CONDITIONS - 17 23 IF = 15 A, dIF/dt = 100 A/μs, VR = 30 V - 18 30 TJ = 25 °C - 20 - TJ = 125 °C Peak recovery current IRRM Reverse recovery charge Qrr Reverse recovery time trr Peak recovery current IRRM Reverse recovery charge UNITS ns - 45 - - 2.7 - - 5.5 - TJ = 25 °C - 26 - TJ = 125 °C - 130 - - 32 - ns - 17 - A - 290 - nC MIN. TYP. MAX. UNITS -65 - 175 °C TJ = 25 °C TJ = 125 °C TJ = 125 °C Qrr IF = 15 A dIF/dt = 200 A/μs VR = 390 V IF = 15 A dIF/dt = 800 A/μs VR = 390 V A nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range Thermal resistance, junction to case FULL-PAK TEST CONDITIONS TJ, TStg RthJC - 1.2 1.4 - 3.7 4.3 Thermal resistance, junction to ambient RthJA Typical socket mount - - 70 Typical thermal resistance, case to heatsink RthCS Mounting surface, flat, smooth and greased - 0.5 - - 2 - - 0.07 - oz. - 12 (10) kgf · cm (lbf · in) Weight 6 (5) Mounting torque Marking device Case style 2L TO-220AC Case style 2L TO-220 FULL-PAK °C/W g ETX1506 ETX1506FP Revision: 15-Jun-15 Document Number: 93549 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ETX1506-M3, VS-ETX1506FP-M3 www.vishay.com Vishay Semiconductors 1000 100 175°C Reverse Current - IR (µA) 100 125°C 10 100°C 1 75°C 0.1 50°C 25°C 0.01 0.001 100 200 300 400 500 600 Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 10 100 Tj = 150°C Junction Capacitance - CT (pF) Instantaneous Forward Current - IF (A) Tj = 175°C 150°C Tj = 25°C 10 1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 1 4.0 0 Forward Voltage Drop - VF (V) 100 200 300 400 500 600 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage Fig. 1 - Typical Forward Voltage Drop Characteristics Thermal Impedance ZthJC (°C/W) 10 D = 0.5 1 D = 0.2 D = 0.1 D = 0.05 0.1 D = 0.02 Single Pulse (Thermal Resistance) D = 0.01 0.01 1E-05 1E-04 1E-03 1E-02 1E-01 1E+00 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Revision: 15-Jun-15 Document Number: 93549 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ETX1506-M3, VS-ETX1506FP-M3 www.vishay.com Vishay Semiconductors Thermal Impedance ZthJC (°C/W) 10 D = 0.5 D = 0.2 1 D = 0.1 D = 0.05 Single Pulse (Thermal Resistance) D = 0.02 D = 0.01 0.1 1E-05 1E-04 1E-03 1E-02 1E-01 1E+00 1E+01 1E+02 t1, Rectangular Pulse Duration (Seconds) Fig. 5 - Maximum Thermal Impedance ZthJC Characteristics (FULL-PAK) 180 Allowable Case Temperature (°C) Allowable Case Temperature (°C) 180 175 170 165 160 155 DC 150 145 140 160 140 120 DC 100 80 60 135 0 0 2 4 6 8 10 12 14 16 Average Forward Current - IF(AV)(A) Fig. 6 - Maximum Allowable Case Temperature vs. Average Forward Current 2 4 6 8 10 12 14 16 Average Forward Current - IF(AV)(A) Fig. 7 - Maximum Allowable Case Temperature vs. Average Forward Current (FULL-PAK) Average Power Loss ( Watts ) 40 RMS Limit 35 30 25 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 DC 20 15 10 5 0 0 2 4 6 8 10 12 14 16 18 20 22 Average Forward Current - IF(AV) (A) Fig. 8 - Forward Power Loss Characteristics Revision: 15-Jun-15 Document Number: 93549 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ETX1506-M3, VS-ETX1506FP-M3 www.vishay.com Vishay Semiconductors 350 55 50 300 If = 15 A, 125°C 45 250 200 Qrr ( nC ) trr ( ns ) 40 35 30 If = 15 A, 125°C 150 25 100 If = 15 A, 25°C 20 50 15 If = 15 A, 25°C typical value typical value 0 10 100 100 1000 1000 di F /dt (A/µs ) Fig. 10 - Typical Stored Charge vs. dIF/dt di F /dt (A/µs ) Fig. 9 - Typical Reverse Recovery vs. dIF/dt VR = 200 V 0.01 Ω L = 70 μH D.U.T. dIF/dt adjust D IRFP250 G S Fig. 11 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 12 - Reverse Recovery Waveform and Definitions Revision: 15-Jun-15 Document Number: 93549 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ETX1506-M3, VS-ETX1506FP-M3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- E T X 15 06 FP -M3 1 2 3 4 5 6 7 8 1 - Vishay Semiconductors product 2 - Circuit configuration: 3 - T = TO-220 4 - X = hyperfast recovery time 5 - Current code: 15 = 15 A 6 - Voltage code: 06 = 600 V 7 - E = single diode None = TO-220 FP = FULL-PAK 8 - Environmental digit: -M3 = halogen-free, RoHS-compliant and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER TUBE MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION VS-ETX1506-M3 50 1000 Antistatic plastic tube VS-ETX1506FP-M3 50 1000 Antistatic plastic tube LINKS TO RELATED DOCUMENTS Dimensions Part marking information 2L TO-220AC www.vishay.com/doc?95259 2L TO-220 FULL-PAK www.vishay.com/doc?95260 2L TO-220AC www.vishay.com/doc?95391 2L TO-220 FULL-PAK www.vishay.com/doc?95392 Revision: 15-Jun-15 Document Number: 93549 6 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors True 2 Pin TO-220 DIMENSIONS in millimeters and inches 0.002" 0.05 mm A A E ØP F B Q H1 D Term. 4 0.150" REF. 45° Ø 2.0 mm REF. L1 b1 L b c 60° 1 2 J1 e SYMBOL MILLIMETERS INCHES MIN. MAX. MIN. MAX. A 4.32 4.57 0.170 0.180 b 0.71 0.91 0.028 0.036 b1 1.15 1.39 0.045 0.055 c 0.36 0.53 0.014 0.021 D 14.99 15.49 0.590 0.610 E 10.04 10.41 0.395 0.410 e 5.08 BSC 0.200 BSC F 1.22 1.37 0.048 0.054 H1 5.97 6.47 0.235 0.255 J1 2.54 2.79 0.100 0.110 L 13.47 13.97 0.530 0.550 L1 (1) 3.31 3.81 0.130 0.150 ØP 3.79 3.88 0.149 0.153 Q 2.60 2.84 0.102 0.112 Notes (1) Lead dimension and finish uncontrolled in L 1 • These dimensions are within allowable dimensions of JEDEC TO-220AB rev. J outline dated 3-24-87 • Controling dimension: Inch Revision: 05-Dec-12 Document Number: 95259 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors True 2 Pin TO-220 FULL-PAK DIMENSIONS in millimeters and inches A ØQ F E Q1 H1 D Q2 θ L1 b1 L b C e J1 SYMBOL MILLIMETERS INCHES MIN. MAX. MIN. MAX. A 4.53 4.93 0.178 0.194 b 0.71 0.91 0.028 0.036 b1 1.15 1.39 0.045 0.055 C 0.36 0.53 0.014 0.021 D 15.67 16.07 0.617 0.633 E 9.96 10.36 0.392 e 5.08 typical 0.408 0.200 typical F 2.34 2.74 0.092 0.107 H1 6.50 6.90 0.256 0.272 J1 2.56 2.96 0.101 0.117 L 12.78 13.18 0.503 0.519 L1 2.23 2.63 0.088 0.104 ØQ 2.98 3.38 0.117 0.133 Q1 3.10 3.50 0.122 0.138 Q2 14.80 15.20 0.583 0.598 0° 5° 0° 5° Revision: 05-Dec-12 Document Number: 95260 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000