BAS21

BAS21
Switching Diode
Features
• RoHS compliant package
Mechanical Data
• Case: SOT-23 Molded plastic
• Epoxy: UL94V-O rate flame retardant
Packing & Order Information
3,000/Reel
Graphic symbol
Publication Order Number: [BAS21]
© Bruckewell Technology Corporation Rev. A -2014
BAS21
Switching Diode
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Maximum Ratings (TA=25°C unless otherwise specified)
Symbol
Parameter
MIN
MAX
Unit
PD(Ta=25°C)
Power dissipation
225
mW
IF
Forward Current
200
ma
VR
Reverse Voltage VR
250
V
TJ/TSTG
Junction and Storage Temperature
-55 to +150
°C
V(BR)
Reverse Breakdown Voltage(IR=100uA)
--
V
IR
Reverse Leakage Current(VR=200V)
1
uA
IF=100mA
1.0
V
IF=200mA
1.25
250
Forward Voltage(Test Condition)
VF
CD
Diode Capacitance (VR=0V, f=1MHz)
8
pF
Trr
Reverse Recovery Time
50
nS
Publication Order Number: [BAS21]
© Bruckewell Technology Corporation Rev. A -2014
BAS21
Switching Diode
■Characteristics Curve
FIG.1-Power Derating Curve
FIG.2-Typical Forward Characteristics
FIG.3-Typical Reverse Characteristics
FIG.4-Total Capacitance vs. Reverse Voltage
Publication Order Number: [BAS21]
© Bruckewell Technology Corporation Rev. A -2014
BAS21
Switching Diode
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE
WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or
their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained in any datasheet or in any other disclosure relating to any product.
Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products
for any particular purpose or the continuing production of any product. To the maximum extent
permitted by applicable law, Bruckewell disclaims
(i) Any and all liability arising out of the application or use of any product.
(ii) Any and all liability, including without limitation special, consequential or incidental damages.
(iii) Any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on
Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in
generic applications.
Such statements are not binding statements about the suitability of products for a particular
application. It is the customer’s responsibility to validate that a particular product with the properties
described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance
may vary over time.
Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of
purchase, including but not limited to the warranty expressed therein.
Publication Order Number: [BAS21]
© Bruckewell Technology Corporation Rev. A -2014