GBU8A-M SILICON BRIDGE RECTIFIERS Features • Rating to 1000V PRV • Surge overload rating to 200 Amperes peak • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique results in inexpensive product • Lead solderable per MIL-STD-202 method 208 • Glass passivated junctions • RoHS compliant package Packing & Order Information 500/Box Graphic symbol MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load, For capacitive load, derate current by 20% GBU GBU GBU GBU GBU GBU GBU Rating Symbol 8A 8B 8D 8G 8J 8K 8M Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward output current Tc = 100 °C IF(AV) 8.0 A IFSM 200 A VF 1.0 V 5.0 μA Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load Maximum instantaneous forw ard voltage @4.0 A Maximum reverse current @TA=25 μA at rated DC blocking voltage @TA=125 Operating Junction Temperature Range Storage Temperature Range Publication Order Number: [GBU8A-M] IR 0.5 TJ -55 to +150 °C TJ,TSTG -55 to +150 °C © Bruckewell Technology Corporation Rev. A -2014 GBU8A-M SILICON BRIDGE RECTIFIERS ■RATING AND CHARACTERISTIC CURVES FIG.1 - TYPICAL FORWARD CURRENT DERATING FIG.3 – MAXIMUM FORWARD SURGE CURRENT CURVE FIG.3- TYPICAL FORWARD CHARACTERISTIC FIG.4 - TYPICAL REVERSE CHARACTERISTICS FIG.5- TYPICAL JUNCTION CAPACITANCE PER ELEMENT Publication Order Number: [GBU8A-M] © Bruckewell Technology Corporation Rev. A -2014 GBU8A-M SILICON BRIDGE RECTIFIERS Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [GBU8A-M] © Bruckewell Technology Corporation Rev. A -2014