ID-XH30S-1W

ID-XH30S-1W Series
3000V
DC ISOLATED&REGULATED TWIN OUTPUT DC-DC CONVERTER
1W,FIXED INPUT,
INPUT,3
000VDC
PRODUCT PROGRAM
Input
Part
Number
FEATURES
Available inputs:5,12&24VDC
(Vo1 & Vo2)
Voltage
Efficiency
Current(MA)
(%,Typ)
Nominal
Range
(VDC)
ID050303XH30S-1W
5
4.5-5.5
3.3
100
10
62
ID050505XH30S-1W
5
4.5-5.5
05
152
15
64
ID120303XH30S-1W
12
10.8-13.2
3.3
100
10
62
ID120505XH30S-1W
12
10.8-13.2
05
152
15
65
ID240303XH30S-1W
24
21.6-26.4
3.3
100
10
62
ID240505XH30S-1W
24
21.6-26.4
05
152
15
65
◆
Available outputs:3.3&5VDC
Output
Voltage(VDC)
Max
Min.
◆
Electrical Specifications (Typical at +25℃, nominal input voltage, rated output current unless otherwise specified)
SIP10 package
◆
Temperature range: -40℃~+85℃
◆
COMMON SPECIFICATIONS
3KVDC isolation
◆
Item
Test Conditions
Min.
Typ.
Max.
Storage humidity range
No Heat sink required
◆
No external component required
◆
◆
Industry standard pinout
◆
RoHS Compliance
Operating temperature
-40
85
Storage temperature
-55
125
Temp. rise at full load
Derating
15
①Product Series
③The 1st Output Voltage
⑤Fixed Input
⑦SIP10 Package Style
②Input Voltage
④The 2nd Output Voltage
⑥3KVDC isolation
⑧Rated Power
℃
See graph
1
Cooling
①
②
③
④ ⑤
⑥ ⑦
⑧
ID 05 05 05 X H30 S -1W
%
25
Short circuit protection*
MODEL SELECTION
Units
90
S
Free air convection
Case material
Plastic(UL94-V0)
Weight
5.2
g
*Supply voltage must be discontinued at the end of short circuit duration.
ISOLATION SPECIFICATIONS
APPLICATIONS
Item
The ID-XH30S-1W Series are specially
designed for applications where a group of
polar power supplies are isolated from the input
power supply in a distributed power supply
system on a circuit board.
These products apply to:
1) Where the voltage of the input power
supply is fixed (voltage variation ≤±10%);
2) Where isolation is necessary between input
and output (isolation voltage ≤3000VDC);
Rated voltage
Test Conditions
Min.
Typ.
Max.
Units
3000
VDC
Test at 500VDC
1000
MΩ
Test at 500VDC
1000
Leakage current
Tested for 1 minute and 1mA max
Isolation resistance (Vin/Vout)
Isolation resistance (Vo1/Vo2)
MΩ
Isolation capacitance(Vin/Vout)
80
pF
Isolation capacitance(Vo1/Vo2)
80
pF
OUTPUT SPECIFICATIONS
Item
Test Conditions
Max.
Units
1
W
Line regulation
±0.4
%
Load regulation
±0.3
%
75
%
Output power
Min.
Typ.
0.1
Efficiency
60
Output voltage accuracy
Temperature drift
100% full load
Ripple & Noise*
20MHz Bandwidth
Switching frequency
Full load, nominal input
45
±1
%
±0.02
%/℃
50
mVp-p
KHz
MICRODC RESERVES THE COPYRIGHT
*Test ripple and noise by "Parallel cable"method.
http://www.microdc.cn
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 1 of 2
ID-XH30S-1W Series
OUTLINE DIMENSIONS ＆ FOOTPRINT DETAILS
DERATING GRAPH
MECHANICAL DIMENSIONS
RECOMMENDED FOOTPRINT
Unit:mm[ inch]
±0.10mm[
±0.004inch]
Pin sect ion tolerances:
tolerances:±
0.10mm[±
±0.25mm[
±0.010inch]
General tolerances:
tolerances:±
0.25mm[±
Top view,grid:2.54mm(0.1inch)
Diameter:1.00mm(0.039inch)
FOOTPRINT DETAILS
SIP10 PIN
Pin
Function
1
+Vin
2
-Vin
7
+VOUT1
8
-VOUT1
9
+VOUT2
10
-VOUT2
TUBE OUTLINE DIMENSIONS
Unless otherwise stated all dimensions in inches (mm) ±0.5mm.
Tube length (10 Pin SIP) : 18PCS (520mm ±2mm).
Tube Quantity :25
RoHS COMPLIANT INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature
of 300°C for 10 seconds.
The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin
with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this
series are backward compatible with Sn/Pb soldering systems.
Microdc Professional Power Module,Inc.
Tel:0086-20-86000646
E-mail:[email protected]
Website:http://www.microdc.cn
REACH COMPLIANT INFORMATION
This series has proven that this product does not contain harmful chemicals, it also has
harmful chemical substances through the registration, inspection and approval.
http://www.microdc.cn
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 2 of 2