AVX RP42010R0100JTTR

High Power Resistive Products
Resistors
AVX introduces its line of High Power Resistive Products.
All products are designed and manufactured at our ISO
9001 Facilities.
All products are qualified as per MIL-PRF-55342.
ELECTRICAL SPECIFICATIONS
Resistance: 50 and 100 Ω standard (10 Ω - 200 Ω available)
Resistance Tolerance: ±5% standard (±2% available)
Power: 2 Watts through 250 Watts, 400 Watts, 800 Watts
Operating Temperature Range: -55ºC to +150ºC
Temperature Coefficient: < 150 ppm/ºC
Low Capacitance
MECHANICAL SPECIFICATIONS
Package: Surface Mount Chips, Chips, Leaded Chips, Flanged
Substrate Material: Aluminum Nitride
Process: Thin Film
Resistive Material: Tantalum
Terminals: Silver
Cover: Alumina
Mounting Flange: 100% Cu, Ni or Ag Plated
Mechanical Tolerance: ±0.13 (0.005)
SMT and Chip products, supplied on Tape and Reel
Non-Magnetic (exception RP4 and RP5 Style Surface Mount Resistors)
RoHS Compliant
POWER DERATING
Power Dissipation
100%
80
60
Rated Safe Operating Range
40
20
0
-50˚C
-25˚C
0˚C
+25˚C
+50˚C
75˚C
100˚C
Heat Sink Temperature (°C)
4
125˚C
150˚C
High Power Resistive Products
Resistors
SURFACE MOUNT CHIP RESISTORS – RP4 AND RP5 SERIES
RP4 Series
GENERAL SPECIFICATIONS
Resistance: 50 and 100 Ω standard
(contact factory for custom resistance values)
Resistive Tolerance: ±2% standard
Operating Temp Range: -55ºC to +150ºC
Temperature Coefficient: <150 ppm/ºC
Resistive Elements: Proprietary Thin Film
Substrate Material: Aluminum Nitride
Terminals: Silver over Nickel
RoHS Compliant
Reliability: MIL-PRF-55342
Tape and Reel Specifications: See Page 38
RP5 Series
Top
View
Overcoat
Side
View
T
T
L
L
LT
Bottom
View
WT
W
LA
WT
W
LT
mm (inches)
AVX
Part Number*
RP42010RxxxxGTTR
RP42525RxxxxGTTR
RP43725RxxxxGTTR
RP43737RxxxxGTTR
RP52010RxxxxGTTR
RP52525RxxxxGTTR
RP53725RxxxxGTTR
RP53737RxxxxGTTR
W
±0.25 (0.010)
2.54 (0.100)
6.22 (0.245)
6.35 (0.250)
9.40 (0.370)
2.54 (0.100)
6.22 (0.245)
6.35 (0.250)
9.40 (0.370)
L
±0.25 (0.010)
5.08 (0.200)
6.22 (0.245)
9.53 (0.375)
9.40 (0.370)
5.08 (0.200)
6.22 (0.245)
9.53 (0.375)
9.40 (0.370)
T
±0.13 (0.005)
1.02 (0.040)
1.02 (0.040)
1.02 (0.040)
1.02 (0.040)
1.02 (0.040)
1.02 (0.040)
1.02 (0.040)
1.02 (0.040)
WT
±0.13 (0.005)
2.29 (0.090)
3.05 (0.120)
3.05 (0.120)
9.14 (0.360)
2.29 (0.090)
3.05 (0.120)
3.05 (0.120)
9.14 (0.360)
LT
±0.13 (0.005)
0.76 (0.030)
1.02 (0.040)
1.27 (0.050)
1.27 (0.050)
0.76 (0.030)
1.02 (0.040)
1.27 (0.050)
1.27 (0.050)
LA
±0.13 (0.005)
2.41 (0.095)
2.79 (0.110)
4.95 (0.195)
4.95 (0.195)
–
–
–
–
Capacitance
(pF)
.95 pF
1.85 pF
3.0 pF
3.5 pF
–
–
–
–
Power Max**
(Watts)
10W
20W
30W
40W
4W
6W
8W
10W
* xxxx denotes Ohm value.
** Test Condition: Chip soldered to a via patch on a 30-mil-thick Rogers RO4350 board; Land surfaces at 100ºC; maximum rated power applied.
Specification: The resistance of the film shall change no more than 0.5% during and after a 1000-hr. Burn-in per Mil-PRF-55342.
HOW TO ORDER
RP4
2010
R
AVX
Series
See chart
above
Case Size
See chart
above
Type
R = Resistor
XXXX
G
T
Value
0050 = 50Ω
0100 = 100Ω
Tolerance
J = ±5%
G = ±2%
Terminal
T = Silver over
Nickel
TR
Packaging
TR = Tape & Reel
Contact factory for custom ratings and sizes.
POWER DERATING
Power Dissipation
100%
80
60
Rated Safe Operating Range
40
20
0
-50˚C
-25˚C
0˚C
+25˚C
+50˚C
75˚C
100˚C
125˚C
150˚C
Heat Sink Temperature (°C)
5