ATC HIGH POWER RESISTIVE PRODUCTS Chip Resistors Style CR1 General Specifications • Resistance: 100 Ω standard, (other Ω values available) Overcoat • Resistive Tolerance: ±5% standard (2% Available) A Top View Resistive Area • Operating Temp Range: -55 to +150˚C • Temperature Coefficient: <150 ppm/˚C • Resistive Elements: Proprietary Thin Film • Substrate Material: Aluminum Nitride Side View • Terminals: Silver • Lead-Free, RoHS Compliant STYLE R • Reliability: MIL-PRF-55342 • Non-Magnetic • Tape and Reel Specifications: See Page 39 of the full Resistive Products Catalog ATC Part Number* W L T A B ±.010 ±.010 ±.005 ±.005 (Typ.) Capacitance (pF) Power Max** (Watts) CR11005TxxxxJ .050 .100 .025 .045 .020 .75 5W CR11206TxxxxJ .060 .120 .025 .055 .020 .90 15W CR12010TxxxxJ .100 .200 .040 .090 .020 1.0 30W CR12525TxxxxJ .245 .245 .040 .130 .020 2.0 60W CR12525TxxxxJ01 .245 .245 .040 .130 .020 2.0 100W CR13725TxxxxJ .250 .375 .040 .198 .025 4.15 150W CR13737TxxxxJ .370 .370 .040 .330 .025 6.0 250W * xxxx denotes Ohm value. ** Test Condition: Chip soldered to a large copper carrier whose surface is at 100° C; maximum rated power applied. Specification: The resistance of the film shall change no more than 0.5% during and after a 1000-hr. Burn-in per Mil-PRF-55342. Power Derating ATC Part Number Code CR1 2010 T xxxx J TR Power Dissipation 100% Case Style 80 Packaging TR - Tape & Reel (Standard) BK - Plastic Carrier TU* (Optional) Tolerance See table below. Case Size 60 Rated Safe Operating Range Termination 40 Value 100 ⍀ = 0100 50 ⍀ = 0050 20 0 -50˚C -25˚C 0˚C +25˚C +50˚C 75˚C 100˚C 125˚C 150˚C Heat Sink Temperature (C) *Chip is reversed upside-down in tape cavity Resistive Tolerances Code G (%) J (%) Tol. ±2 ±5 Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. © 2012 American Technical Ceramics Corp. All Rights Reserved. A M E R I C A N ATC North America [email protected] Excerpt from ATC # 001-944; Rev. R, 11/13 T E C H N I C A L C E R A M I C S ATC Europe [email protected] ATC Asia [email protected] www.at c er am ic s .c om