Bulletin I2195 12/04
SAFEIR Series
10ETS12FPPbF
INPUT RECTIFIER DIODE
TO-220 FULLPAK
VF < 1.1V @ 10A
Lead-Free ("PbF" suffix)
IFSM = 200A
VRRM = 1200V
Description/ Features
The 10ETS12FPPbF rectifier SAFEIR series
has been optimized for very low forward
voltage drop, with moderate leakage. The
glass passivation technology used has reliable
operation up to 150°C junction temperature.
Typical applications are in input rectification
and these products are designed to be used
with International Rectifier Switches and
Output Rectifiers which are available in
identical package outlines. Fully isolated
package (VINS = 2500 VRMS).
UL E78996 approved
Output Current in Typical Applications
Applications
Single-phase Bridge
Three-phase Bridge
Units
12.0
16.0
A
Capacitive input filter T A = 55°C, TJ = 125°C
common heatsink of 1°C/ W
Major Ratings and Characteristics
Characteristics
Package Outline
Values
Units
10
A
VRRM Range
1200
V
IFSM
200
A
1.1
V
- 40 to 150
°C
IF(AV) Sinusoidal waveform
VF
@ 10 A, TJ = 25°C
TJ
www.irf.com
TO-220AC FULLPAK
1
10ETS12FPPbF SAFEIR Series
Bulletin I2195 12/04
Voltage Ratings
Part Number
VRRM , maximum
VRSM , maximum non repetitive
IRRM
peak reverse voltage
peak reverse voltage
150°C
V
V
mA
1200
1300
0.5
10ETS12FPPbF
Absolute Maximum Ratings
Parameters
Values
Units
10
A
IF(AV) Max. Average Forward Current
IFSM
2
I t
Max. Peak One Cycle Non-Repetitive
170
Surge Current
200
2
Max. I t for fusing
130
A
A2s
145
2
I √t
2
Max. I √t for fusing
Conditions
@ TC = 105° C, 180° conduction half sine wave
10ms Sine pulse, rated VRRM applied
10ms Sine pulse, no voltage reapplied
10ms Sine pulse, rated VRRM applied
10ms Sine pulse, no voltage reapplied
2
1450
A √s
Values
Units
t = 0.1 to 10ms, no voltage reapplied
Electrical Specifications
Parameters
VFM
Max. Forward Voltage Drop
1.1
V
rt
Forward slope resistance
20
mΩ
VF(TO) Threshold voltage
0.82
V
IRM
0.05
Max. Reverse Leakage Current
mA
Conditions
@ 10A, TJ = 25°C
TJ = 150°C
TJ = 25 °C
TJ = 150 °C
0.50
VR = rated V RRM
Thermal-Mechanical Specifications
Parameters
Values
Units
TJ
Max. Junction Temperature Range
- 40 to 150
°C
Tstg
Max. Storage Temperature Range
- 40 to 150
°C
RthJC Max. Thermal Resistance Junction
to Case
RthJA Max. Thermal Resistance Junction
to Ambient
2.5
°C/W
62
°C/W
RthCS Typical Thermal Resistance, Case to
Heatsink
0.5
°C/W
wt
Approximate Weight
T
Mounting Torque
Case Style
Marking Device
2
2 (0.07)
g (oz.)
Min.
6 (5)
Max.
12 (10)
Kg-cm
(Ibf-in)
TO-220 FULLPAK
Conditions
DC operation
Mounting surface , smooth and greased
(94/V0)
10ETS12FP
www.irf.com
10ETS12FPPbF SAFEIR Series
150
10ETS.. Series
R thJC(DC) = 2.5 °C/ W
140
130
Conduction Angle
120
110
100
30°
60°
90
90°
120°
180°
80
0
2
4
6
8
10
12
Maximum Allowable Case Temperature (°C)
Maximum Allowable Case Temperature (°C)
Bulletin I2195 12/04
150
10ETS.. Series
R thJC (DC) = 2.5 °C/ W
140
130
Conduction Period
120
110
30°
60°
100
90°
0
2
Average Forwa rd Current (A)
10
RMSLimit
8
6
4
Conduction Angle
2
10ETS.. Series
TJ = 150°C
0
0
2
4
6
8
10
Maximum Average Forward Power Loss (W)
12
4
6
8
10
12
DC
14
16
18
Fig. 2 - Current Rating Characteristics
20
DC
180°
120°
90°
60°
30°
18
16
14
12
10
8
RMSLimit
6
Cond uction Period
4
10ETS.. Series
T = 150°C
2
J
0
0
2
4
6
8
10
12
14
16
Average Forward Current (A)
Average Forward Current (A)
Fig. 3 - Forward Power Loss Characteristics
Fig. 4 - Forward Power Loss Characteristics
200
180
At Any Rated Load Condition And With
Rated V RRM Ap plied Following Surge.
Initial TJ = 150°C
160
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
140
120
100
80
10ETS.. Series
60
40
1
10
100
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 5 - Maximum Non-Repetitive Surge Current
www.irf.com
Peak Half Sine Wave Forward Current (A)
Maximum Average Forward Power Loss (W)
Peak Half Sine Wave Forward Current (A)
180°
120°
90°
60°
30°
14
180°
Average Forward Current (A)
Fig. 1 - Current Rating Characteristics
16
120°
90
240
Maximum Non Repetitive Surge Current
Versus Pulse Train Dura tion.
Initial TJ = 150 °C
200
No Voltage Reap plied
Rated VRRM Reapplied
180
220
160
140
120
100
80
60
40
0.01
10ETS.. Series
0.1
1
Pulse Train Duration (s)
Fig. 6 - Maximum Non-Repetitive Surge Current
3
10ETS12FPPbF SAFEIR Series
Bulletin I2195 12/04
Insta ntaneous Forward Current (A)
100
TJ= 25°C
TJ= 150°C
10
10ETS.. Series
1
0
0.5
1
1.5
2
2.5
3
Instantaneous Forward Voltage (V)
Transient The rmal Impedanc e Z thJC (°C/ W)
Fig. 8 - Forward Voltage Drop Characteristics
10
D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08
Stead y State Value
(DC Operation)
1
10ETS.. Series
Single Pulse
0.1
0.0001
0.001
0.01
0.1
1
10
Square Wave Pulse Duration (s)
Fig. 9 - Thermal Impedance ZthJC Characteristics
4
www.irf.com
10ETS12FPPbF SAFEIR Series
Bulletin I2195 12/04
Outline Table
Base
Cathode
2
10.6
HOLE ø 3.4
10.4
3.1
Dimensions in millimeters
1
3
Anode
3.2
Cathode
15.8
16.0
15.4
16.4
7.1
6.7
3.7
2.8
2.6
Part Marking Information
13.7
EXAMPLE: THIS IS A 10ETS12FP
2.54
TYP.
LOT
0.9 CODE 1789
0.48
0.7
ASSEMBLED
ON WW 19, 20020.44
2.54 TYP.
IN THE ASSEMBLY LINE "C" 2.85
2.65
R0.7 (2 PLACES)
4.8
4.6
R0.5
5°± 0.5°
www.irf.com
INTERNATIONAL
RECTIFIER
LOGO
1.15
1.4
ASSEMBLY
LOT CODE
1.3
1.05
TYP
13.5
3.3
3.1
10°
PART NUMBER
FP = Fullpack
DATE CODE
YEAR = 2002
WEEK 19
P = Lead-Free
5°± 0.5°
5
10ETS12FPPbF SAFEIR Series
Bulletin I2195 12/04
Ordering Information Table
Device Code
10
E
T
S
12
FP
PbF
1
2
3
4
5
6
7
1
-
Current Rating (10 = 10A)
2
-
Circuit Configuration:
3
-
Package:
4
-
Type of Silicon:
5
-
Voltage Rating (12 = 1200V)
6
-
Fullpak
7
-
y none = Standard Production
E = Single Diode
T = TO-220AC
S = Standard Recovery Rectifier
y PbF = Lead-Free
6
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level and Lead-Free.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 12/04
6
www.irf.com