Bulletin PD-20698 rev. B 02/04 8ETL06 8ETL06S 8ETL06-1 8ETL06FP Ultra-low VF Hyperfast Rectifier for Discontinuous Mode PFC Features • • • • • • Benchmark Ultra-low Forward Voltage Drop Hyperfast Recovery Time Low Leakage Current 175°C Operating Junction Temperature Fully Isolated package (VINS = 2500 VRMS) UL E78996 approved VF = 0.96V typ. IF(AV) = 8Amp VR = 600V Description State of the art, ultra-low VF, soft-switching Hyperfast Rectifiers optimized for Discontinuous (Critical) Mode (DCM) Power Factor Correction (PFC). The minimised conduction loss, optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. The device is also intended for use as a free wheeling diode in power supplies and other power switching applications. Applications AC-DC SMPS 70W-400W e.g. Laptop & Printer AC Adaptors, Desktop PC, TV & Monitor, Games units and DVD AC-DC power supplies. Absolute Maximum Ratings Parameters VRRM Peak Repetitive Reverse Voltage IF(AV) Average Rectified Forward Current @ TC = 160°C Max Units 600 V 8 A @ TC = 142°C (FULLPACK) IFSM Non Repetitive Peak Surge Current @ TJ = 25°C 175 IFM Peak Repetitive Forward Current 16 TJ, TSTG Operating Junction and Storage Temperatures - 65 to 175 °C Case Styles 8ETL06 8ETL06S Base Cathode Base Cathode 2 2 8ETL06FP 8ETL06-1 2 1 1 Cathode 3 Anode TO-220AC www.irf.com 1 3 Anode N/C D2PAK 1 3 Cathode 3 Anode Anode N/C TO-262 TO-220 FULLPACK 1 8ETL06, 8ETL06S, 8ETL06-1, 8ETL06FP Bulletin PD-20698 rev. B 02/04 Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameters VBR, Vr Breakdown Voltage, Blocking Voltage VF Forward Voltage IR Min Typ Max Units Test Conditions 600 Reverse Leakage Current - - V IR = 100µA - 0.96 1.05 V IF = 8A, TJ = 25°C - 0.81 0.86 V IF = 8A, TJ = 150°C - 0.05 5 µA VR = VR Rated - 20 100 µA TJ = 150°C, VR = VR Rated CT Junction Capacitance - 17 - pF VR = 600V LS Series Inductance - 8.0 - nH Measured lead to lead 5mm from package body Dynamic Recovery Characteristics @ TC = 25°C (unless otherwise specified) Parameters trr Min Typ Max Units Test Conditions Reverse Recovery Time IRRM Qrr Peak Recovery Current Reverse Recovery Charge - 60 100 - 150 250 - 170 - - 250 - - 15 - - 20 - - 1.3 - - 2.6 - ns IF = 1A, diF/dt = 100A/µs, VR = 30V IF = 8A, diF/dt = 100A/µs, VR = 30V TJ = 25°C TJ = 125°C A IF = 8A TJ = 25°C diF /dt = 200A/µs VR = 390V TJ = 125°C µC TJ = 25°C TJ = 125°C Thermal - Mechanical Characteristics Parameters Min Typ Max Units °C TJ Max. Junction Temperature Range - - 175 TStg Max. Storage Temperature Range - 65 - 175 RthJC Thermal Resistance, Junction to Case Per Leg - 1.4 2 Fullpack (Per Leg) - 3.4 4.3 - - 70 0.5 - RthJA Thermal Resistance, Junction to Ambient RthCS Thermal Resistance, Case to Heatsink - Weight - 2.0 - g - 0.07 - (oz) 6.0 - 12 Kg-cm 5.0 - 10 lbf.in Mounting Torque Per Leg °C/W Typical Socket Mount Mounting Surface, Flat, Smooth and Greased 2 www.irf.com 8ETL06, 8ETL06S, 8ETL06-1, 8ETL06FP Bulletin PD-20698 rev. B 02/04 100 100 Tj = 175˚C Reverse Current - I R (µA) 10 125˚C 100˚C 1 75˚C 0.1 50˚C 0.01 25˚C 0.001 100 T = 175˚C J 200 300 400 500 600 Reverse Voltage - VR (V) T = 150˚C J Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage T = 25˚C J 100 T J = 25˚C Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 150˚C 10 1 10 0.1 0.4 0.8 1.2 1.6 0 2 100 200 300 400 500 600 Reverse Voltage - VR (V) Forward Voltage Drop - VFM (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 1 - Typical Forward Voltage Drop Characteristics Thermal Impedance Z thJC (°C/W) 10 1 0.1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.01 0.00001 www.irf.com PDM t1 t2 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.0001 0.001 0.01 0.1 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics 1 3 8ETL06, 8ETL06S, 8ETL06-1, 8ETL06FP Bulletin PD-20698 rev. B 02/04 Thermal Impedance Z thJC (°C/W) 10 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 1 0.1 PDM t1 Single Pulse (Thermal Resistance) t2 Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 t1, Rectangular Pulse Duration (Seconds) Fig. 5 - Max. Thermal Impedance Z thJC Characteristics (FULLPACK) 180 Allowable Case Temperature (°C) Allowable Case Temperature (°C) 180 100 175 170 165 DC 160 Square wave (D = 0.50) Rated Vr applied 155 see note (3) 160 DC 140 120 Square wave (D = 0.50) Rated Vr applied 100 see note (3) 80 150 0 2 4 6 8 10 12 14 Average Forward Current - IF(AV) (A) Fig. 6 - Max. Allowable Case Temperature Vs. Average Forward Current 0 2 4 6 8 10 12 14 Average Forward Current - IF(AV) (A) Fig. 7 - Max. Allowable Case Temperature Vs. Average Forward Current (FULLPACK) Average Power Loss ( Watts ) 12 10 8 DC 6 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 RMS Limit 4 2 (3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 8); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR 0 0 2 4 6 8 10 Average Forward Current - IF(AV) (A) 12 Fig. 8 - Forward Power Loss Characteristics 4 www.irf.com 8ETL06, 8ETL06S, 8ETL06-1, 8ETL06FP Bulletin PD-20698 rev. B 02/04 5000 450 IF = 16 A IF = 8 A 4500 350 4000 300 3500 Qrr ( nC ) trr ( ns ) 400 250 200 3000 2500 150 2000 100 1500 50 IF = 16 A IF = 8 A 1000 V R = 390V T J = 125˚C T J = 25˚C 0 100 V R = 390V T J = 125˚C T J = 25˚C 500 100 1000 1000 di F /dt (A/µs ) di F /dt (A/µs ) Fig. 9 - Typical Reverse Recovery vs. di F /dt Fig. 10 - Typical Stored Charge vs. di F /dt Reverse Recovery Circuit VR = 200V 0.01 Ω L = 70µH D.U.T. diF /dt dif/dt ADJUST D G IRFP250 S Fig. 11- Reverse Recovery Parameter Test Circuit www.irf.com 5 8ETL06, 8ETL06S, 8ETL06-1, 8ETL06FP Bulletin PD-20698 rev. B 02/04 3 t rr IF tb ta 0 Q rr 2 I RRM 4 0.5 I RRM di(rec)M/dt 5 0.75 I RRM 1 diFf /dt 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr Fig. 12 - Reverse Recovery Waveform and Definitions Outline Table 10.54 (0.41) MAX. 1.32 (0.05) 3.78 (0.15) 3.54 (0.14) 2.92 (0.11) 2.54 (0.10) TERM 2 15.24 (0.60) 14.84 (0.58) 1 1.22 (0.05) DIA. Base Cathode 2 6.48 (0.25) 6.23 (0.24) 3 2° 1 14.09 (0.55) 3.96 (0.16) 13.47 (0.53) 3.55 (0.14) Cathode 3 Anode 0.10 (0.004) 2.04 (0.080) MAX. 1.40 (0.05) 2.89 (0.11) 1.15 (0.04) 0.94 (0.04) 2.64 (0.10) 0.69 (0.03) 1 4.57 (0.18) 3 0.61 (0.02) MAX. 4.32 (0.17) 5.08 (0.20) REF. 6 Conforms to JEDEC Outline TO-220AC Dimensions in millimeters and (inches) www.irf.com 8ETL06, 8ETL06S, 8ETL06-1, 8ETL06FP Bulletin PD-20698 rev. B 02/04 Outline Table 4.69 (0.18) 4.20 (0.16) 10.16 (0.40) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 15.49 (0.61) 93° 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 5.28 (0.21) 2.32 (0.09) 4.78 (0.19) REF. 1.40 (0.055) 1.14 (0.045) 2X 2 0.55 (0.02) 8.89 (0.35) 3X Base Cathode 0.46 (0.02) 0.93 (0.37) MINIMUM RECOMMENDED FOOTPRINT 0.69 (0.27) 11.43 (0.45) 3 1 Anode N/C 1 3 4.57 (0.18) 4.32 (0.17) 2 8.89 (0.35) 17.78 (0.70) 0.61 (0.02) MAX. 5.08 (0.20) REF. 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) Conforms to JEDEC Outline D2PAK Dimensions in millimeters and (inches) 2X 2 1 N/C 3 Anode NC Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) www.irf.com 7 8ETL06, 8ETL06S, 8ETL06-1, 8ETL06FP Bulletin PD-20698 rev. B 02/04 Outline Table 10.6 HOLE ø 3.4 10.4 3.1 1 3.2 Cathode 3 Anode 15.8 16.0 15.4 16.4 7.1 6.7 3.7 2.8 2.6 13.7 2.54 TYP. 0.9 0.7 2.54 TYP. 0.48 0.44 2.85 2.65 1.15 1.4 1.05 13.5 3.3 3.1 10° TYP 1.3 R0.7 (2 PLACES) 4.8 4.6 R0.5 Conforms to JEDEC Outline TO-220 FULLPACK Dimensions in millimeters and (inches) 5°± 0.5° 5°± 0.5° Ordering Information Table Device Code 8 E T L 06 -1 1 2 3 4 5 6 1 - Current Rating (8 = 8A) 2 - E = Single Diode 3 - T = TO-220, D2Pak = Ultra-low VF HyperFast Recovery 4 - L 5 - Voltage Rating (06 = 600V) 6 - "-1" = TO-262 Option S = D2Pak None = TO-220AC FP 8 = TO-220 FULLPACK www.irf.com 8ETL06, 8ETL06S, 8ETL06-1, 8ETL06FP Bulletin PD-20698 rev. B 02/04 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 02/04 www.irf.com 9