Product Change Notification PCN Number: HC142702 Notification Date: August 26, 2014 Title: Replacement of Existing Datasheet 9337C-AUTO-05/14 by the New Version 9337D-AUTO-07/14 Product Identification: ATA663254-FAQW, ATA663231-FAQW, ATA663203-FAQW Reason for Change: Material / Composition Manufacturing Location Processing / Manufacturing Quality / Reliability Design / Firmware Logistics Datasheet Other: Change Description: Atmel has qualified and released new variant of the ATA6632 family. Datasheet updated by adding the ATA663203-FAQW. Figure 1- 2 ATA663203 “Block Diagram Voltage Regulator” on page 3 added ATA663203 Pin configuration on page 4 added Figure 4-3 ATA663203 “Voltage Regulator Operating Modes” on page 8 added Section 4.2.5 ATA663203 “Active Mode (Voltage Regulator only)” on page 10 added Figure 8-2 ATA663203 “Typical Application Circuit Voltage Regulator” on page 23 added Section 9 ATA663203 “Ordering Information” on page 24 updated. There is no change in form, fit and function of the existing products ATA663254 and ATA63231. Datasheet version: Old: 9337C-AUTO-05/14 New: 9337D-AUTO-07/14 New PPAP is also available. To obtain ATA663203-FAQW, ATA663254-FAQW and ATA663231-FAQW samples, please contact your local Atmel Sales Representative to complete the proper request form. Identification Method to Distinguish Change: Not applicable. Qualification Data: Available Will be available (mm/dd/yr): Not Applicable Samples: Available Will be available (mm/dd/yr): Not Applicable Quantifiable Impact on Quality & Reliability: Not impact. ATMEL Automotive GmbH Theresienstrasse 2 POB 3535 D- 74072 HEILBRONN Germany QF-8004 Rev. 13 07/23/2013 Page 1 of 2 PCN NO. HC142702 Page 2 of 2 Proposed First Ship Date*: August 1st 2014 *The Proposed First Ship Date is the forecasted date that a customer may expect to receive changed product. This is determined by the estimated date of inventory depletion on the PCN issue date. This may be affected by fluctuations in supply and demand. Consequently, although customers should be prepared to receive changed product on this date, Atmel will continue to ship pre-changed product until a time in which inventory has been depleted. This may result in pre-changed product being shipped to customers after this forecasted date. Atmel Contact: Please contact your Atmel Sales Representative or Distributor for additional information (when replying via e-mail please include the PCN number in subject line). Information provided herein is in connection with Atmel products and this information is provided “AS IS”. Atmel assumes no responsibility for any errors that may appear in this document. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Atmel’s Terms and Conditions of Sale for such products, Atmel assumes no liability whatsoever, and Atmel disclaims any express or implied warranty, including liability or warranties relating to fitness for a particular purpose, merchantability, or noninfringement of any patent, copyright or other intellectual property right. Atmel products are not intended for use in a product or system intended to support or sustain life which, if it fails, can be reasonably expected to result in significant personal injury. Atmel may make changes to specifications and product descriptions at any time, without notice. CUSTOMER ACKNOWLEDGEMENT OF RECEIPT: Atmel requests you acknowledge receipt of this PCN. Please complete and email to [email protected] and the Atmel Contact listed above. In your acknowledgement, you can grant approval or request additional information. Atmel will deem this change accepted unless specific conditions of acceptance are provided in writing within 30 days from the date of this notice. To be completed by customer: Approved Rejected (Please state reason for rejection): Company: Name: Title: Date: Email Address: Location: Comments: ATMEL Automotive GmbH Theresienstrasse 2 POB 3535 D- 74072 HEILBRONN Germany QF-8004 Rev. 13 07/23/2013