STEVAL-ISA135V1
4 W, 12 V output, isolated flyback converter using VIPer™ Plus VIPER06HS
Data brief
Description
The STEVAL-ISA135V1 is a 12 V - 4 W power
supply in isolated flyback topology based on the
VIPer06HS, a new offline high voltage converter
having, as main features: 800 V avalanche
rugged power section, PWM operation at 115
kHz with frequency jittering for lower EMI, cycleby-cycle current limit with adjustable set point,
on-board soft-start and safe auto-restart after a
fault condition.
Features
•
•
•
•
•
•
•
•
•
•
•
•
AC main input voltage: VIN 85 VAC - 265 VAC
Main frequency: fL 50 Hz - 60 Hz
Output voltage: VOUT 12 V
Max output current: IOUT 333 mA
Precision of output regulation:
ΔVOUT_LF ±5 %
High frequency output voltage ripple:
ΔVOUT_HF 50 mV
Min active mode efficiency: ηAV 71 %
Max ambient operating temperature:
TAMB 60 ºC
Thermal shutdown with hysteresis
Delayed overload protection
Open loop failure protection (if auxiliary
winding is used)
RoHS compliant
May 2014
DocID025243 Rev 2
For further information contact your local STMicroelectronics sales
office
1/4
www.st.com
Schematic diagram
1
STEVAL-ISA135V1
Schematic diagram
Figure 1: STEVAL-ISA135V1 circuit schematic
2/4
DocID025243 Rev 2
STEVAL-ISA135V1
2
Revision history
Revision history
Table 1: Document revision history
Date
Version
Change
02-Oct-2013
1
Initial release.
08-May-2014
2
Title has been updated.
DocID025243 Rev 2
3/4
STEVAL-ISA135V1
Please Read Carefully
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or
services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third
party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR
IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT
LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR
EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS
LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY
REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR
(D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE,
THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN
WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR
"AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL" INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN
SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN
AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2014 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4
DocID025243 Rev 2