Download

 Data sheet...
SAK Series
SAKS 1/G20
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
The fuse terminals of the Weidmüller SAK series are
available in two different forms:
• Fuse terminal with pivoting retaining lever
• Fuse terminal with screwed cap
General ordering data
Order No.
Type
Version
GTIN (EAN)
Qty.
0191220000
SAKS 1/G20
SAK Series, Fuse terminal, Rated cross-section:
10 mm², Screw connection, KrG, Medium yellow,
Direct mounting
4008190095260
20 pc(s).
Creation date September 11, 2012 12:29:49 PM CEST
Catalogue status 23.07.2012 / We reserve the right to make technical changes.
1
Data sheet...
SAK Series
SAKS 1/G20
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Dimensions
Length
Height
Net weight
54 mm
61 mm
39.4 g
Width
Height of lowest version
-60 °C
Storage temperature
Continuous operating temp., max.
No
1
Snap-on
Installation advice
Open sides
Direct mounting
right
12400-198
10 A
26 AWG
Voltage size C (CSA)
Wire cross section max. (CSA)
600 V
10 AWG
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, max.
13 mm
61 mm
Temperatures
Operating temperature
Continuous operating temp., min.
130 °C
Additional technical data
Explosion-tested version
Number of similar terminals
Type of mounting
CSA ratings data
Certificate No. (CSA)
Current size C (CSA)
Wire cross section min. (CSA)
Clampable wires (additional connection)
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, min.
0.5 mm²
10 mm²
Clampable wires (rated connection)
Type of connection
Screw connection
Blade size
1.0 x 5.5 mm
Number of connections
2
Clamping range, rated connection, max. 16 mm²
Tightening torque, min.
1.2 Nm
Torque level with DMS electric
screwdriver
4
Wire connection cross section, solid
core, max. rated connection
0.5 mm²
Wire connection cross section, stranded,
rated connection, min.
1.5 mm²
Wire connection cross section, finely
stranded, max.
10 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, min.
0.5 mm²
Wire connection cross section AWG,
min.
AWG 26
Stripping length
Connection direction
Clamping range, rated connection, min.
Clamping screw
Tightening torque, max.
Gauge to IEC 60947-1
12 mm
on side
0.13 mm²
M4
2.4 Nm
Rated voltage
Rated current
Pollution severity
500 V
10 A
3
B6
Wire connection cross section, solid
core max. rated connection
16 mm²
Wire connection cross section, stranded,
rated connection, max.
10 mm²
Wire connection cross-section, finely
stranded, min.
0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, max.
10 mm²
Wire connection cross section AWG,
max.
AWG 10
Rated data
Rated cross-section
Rated impulse withstand voltage
Current at maximum wires
10 mm²
6 kV
10 A
Creation date September 11, 2012 12:29:49 PM CEST
Catalogue status 23.07.2012 / We reserve the right to make technical changes.
2
Data sheet...
SAK Series
SAKS 1/G20
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
UL ratings data
Certificate No. (UR)
E60693VOL1SEC18
Current size C (UR)
6.3 A
Conductor size Factory wiring min. (UR) 26 AWG
Voltage size C (UR)
600 V
Conductor size Factory wiring max. (UR) 8 AWG
Conductor size Field wiring max. (UR) 10 AWG
KrG
Medium yellow
Material
UL 94 flammability rating
KrG
V-0
SAK Series
on side
2
No
Type of connection
Number of levels
No. of clamping points per level
End cover plate required
Screw connection
1
2
Yes
500 V
Type of voltage for indicator
AC/DC
G-Si. 5 x 20
for screw fixing
AC/DC
Display
Operating voltage, max.
Without LED
500 V
EC000899
30-21-18-11
27-14-11-16
27-14-11-16
ETIM 3.0
eClass 4.1
eClass 6.0
EC000899
27-14-11-16
27-14-11-16
Material data
Insulating material
Colour
System specifications
Product family
Connection direction
Number of connections
Levels cross-connected internally
Display element
Operating voltage for display, max.
Fuse terminals
Cartridge fuse
Fuse holder (cartridge holder)
Type of voltage for indicator
Classifications
ETIM 2.0
UNSPSC
eClass 5.1
eClass 7.0
Product information
Descriptive text technical data
Descriptive text accessories
Connections for 10-mm² stranded conductors require a tightening torque of 2 Nm.
Refer to "Accessories" Chapter for cross-connection accessories
Approvals
Approvals
Creation date September 11, 2012 12:29:49 PM CEST
Catalogue status 23.07.2012 / We reserve the right to make technical changes.
3
Data sheet...
SAK Series
SAKS 1/G20
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Downloads
DXF
STEP
3-D model
02957_SAKS_1-G20_DXF.dxf
0191220000_02957_SAKS_1-G20_STP.stp
Creation date September 11, 2012 12:29:49 PM CEST
Catalogue status 23.07.2012 / We reserve the right to make technical changes.
4
Similar pages