INFINEON BTS3142D_06

Smart Low Side Power Switch
Power HITFET BTS 3142D
Features
Product Summary
· Logic Level Input
Drain source voltage
VDS
42
V
· Input Protection (ESD)
On-state resistance
R DS(on)
28
mΩ
· Thermal shutdown
Nominal load current
ID(Nom)
4.6
A
• Green product (RoHS compliant)
Clamping energy
EAS
3.5
J
· Overload protection
· Short circuit protection
· Overvoltage protection
· Current limitation
P / PG-TO252-3-11
· Analog driving possible
Application
• All kinds of resistive, inductive and capacitive loads in switching
or linear applications
• µC compatible power switch for 12 V DC applications
• Replaces electromechanical relays and discrete circuits
General Description
N channel vertical power FET in Smart SIPMOS  technology. Fully protected by embedded
protection functions.
Vbb
M
HITFET 
Drain
Current
Limitation
In
Pin 2 and 4 (TAB)
OvervoltageProtection
Gate-Driving
Unit
Pin 1
ESD
Overload
Protection
Overtemperature
Protection
Short circuit
Protection
Pin 3
Source
Datasheet
1
Rev. 1.3, 2006-12-22
Smart Low Side Power Switch
Power HITFET BTS 3142D
Maximum Ratings at T j = 25°C, unless otherwise specified
Parameter
Symbol
Value
Drain source voltage
VDS
42
Drain source voltage for short circuit protection
VDS(SC)
28
Unit
V
Tj = -40...150°C
Continuous input current
IIN
mA
-0.2V ≤ VIN ≤ 10V
no limit
VIN < -0.2V or VIN > 10V
| IIN | ≤ 2
Operating temperature
Tj
-40 ...+150
Storage temperature
Tstg
-55 ... +150
Power dissipation
Ptot
°C
W
TC = 85 °C
59
6cm2 cooling area , TA = 85 °C
1.1
Unclamped single pulse inductive energy 1)
EAS
3.5
J
Load dump protection VLoadDump2) = VA + VS
VLD
67.5
V
VESD
2
kV
junction - case:
R thJC
1.1
SMD: junction - ambient
R thJA
VIN = 0 and 10 V, td = 400 ms, R I = 2 Ω,
R L = 3 Ω, VA = 13.5 V
Electrostatic discharge voltage (Human Body Model)
according to MIL STD 883D, method 3015.7 and
EOS/ESD assn. standard S5.1 - 1993
Thermal resistance
@ min. footprint
115
@ 6 cm2 cooling area 3)
55
K/W
1 Not tested, specified by design.
2V
Loaddump is setup without the DUT connected to the generator per ISO 7637-1 and DIN 40839
3 Device on 50mm*50mm*1.5mm epoxy PCB FR4 with 6cm2 (one layer, 70µm thick) copper area for drain
connection. PCB mounted vertical without blown air.
Datasheet
2
Rev. 1.3, 2006-12-22
Smart Low Side Power Switch
Power HITFET BTS 3142D
Electrical Characteristics
Symbol
Parameter
at Tj = 25°C, unless otherwise specified
Values
Unit
min.
typ.
max.
42
-
55
V
-
1.5
20
µA
Characteristics
Drain source clamp voltage
VDS(AZ)
Tj = - 40 ...+ 150, I D = 10 mA
Off-state drain current Tj = -40 ... +150°C
IDSS
VDS = 32 V, VIN = 0 V
Input threshold voltage
V
VIN(th)
ID = 1.2 mA, Tj = 25 °C
1.3
1.7
2.2
ID = 1.2 mA, Tj = 150 °C
0.8
-
-
-
10
30
On state input current
IIN(on)
On-state resistance
R DS(on)
mΩ
VIN = 5 V, ID = 4.6 A, T j = 25 °C
-
27
34
VIN = 5 V, ID = 4.6 A, T j = 150 °C
-
54
68
VIN = 10 V, I D = 4.6 A, Tj = 25 °C
-
23
28
VIN = 10 V, I D = 4.6 A, Tj = 150 °C
-
46
56
On-state resistance
µA
R DS(on)
Nominal load current
A
ID(Nom)
Tj < 150°C, VIN = 10 V, TA = 85 °C, SMD 1)
Nominal load current
4.6
-
-
ID(ISO)
12.6
-
-
ID(lim)
30
45
55
VIN = 10 V, VDS = 0.5 V, TC = 85 °C, Tj < 150°C
Current limit (active if VDS>2.5 V)2)
VIN = 10 V, VDS = 12 V, tm = 200 µs
[email protected] 6 cm2 cooling area
2Device switched on into existing short circuit (see diagram Determination of I
D(lim)). If the device is in on condition
and a short circuit occurs, these values might be exceeded for max. 50 µs.
Datasheet
3
Rev. 1.3, 2006-12-22
Smart Low Side Power Switch
Power HITFET BTS 3142D
Electrical Characteristics
Symbol
Parameter
at Tj = 25°C, unless otherwise specified
Values
Unit
min.
typ.
max.
ton
-
60
120
toff
-
60
120
-dV DS/dton
-
0.3
1.5
dV DS/dtoff
-
0.3
1.5
150
175
-
°C
µA
Dynamic Characteristics
Turn-on time
VIN to 90% I D:
µs
R L = 4.7 Ω, VIN = 0 to 10 V, Vbb = 12 V
Turn-off time
VIN to 10% I D:
R L = 4.7 Ω, VIN = 10 to 0 V, Vbb = 12 V
Slew rate on
70 to 50% Vbb:
V/µs
R L = 4.7 Ω, VIN = 0 to 10 V, Vbb = 12 V
Slew rate off
50 to 70% Vbb:
R L = 4.7 Ω, VIN = 10 to 0 V, Vbb = 12 V
Protection Functions1)
Thermal overload trip temperature
T jt
Input current protection mode
IIN(Prot)
-
220
400
Input current protection mode
IIN(Prot)
-
180
400
EAS
3.5
-
-
J
VSD
-
1.0
-
V
Tj = 150 °C
Unclamped single pulse inductive energy 2)
ID = 4.6 A, T j = 25 °C, Vbb = 12 V
Inverse Diode
Inverse diode forward voltage
IF = 51 A, t m = 250 µs, V IN = 0 V,
tP = 300 µs
1Integrated protection functions are designed to prevent IC destruction under fault conditions
described in the data sheet. Fault conditions are considered as "outside" normal operating range.
Protection functions are not designed for continuous repetitive operation.
2 Not tested, specified by design.
Datasheet
4
Rev. 1.3, 2006-12-22
Smart Low Side Power Switch
Power HITFET BTS 3142D
Block diagram
Inductive and overvoltage
output clamp
Terms
RL
V
I IN
2
1
D
Z
D
IN
ID
VDS
Vbb
HITFET
S
S
3
VIN
HITFET
Short circuit behaviour
Input circuit (ESD protection)
V
IN
Gate Drive
Input
I
Source/
Ground
IN
I
D
T
t
t
t
j
t
Datasheet
5
Rev. 1.3, 2006-12-22
Smart Low Side Power Switch
Power HITFET BTS 3142D
1 Maximum allowable power dissipation
2 On-state resistance
Ptot = f(T C) resp.
R ON = f(T j); ID=12.6A; V IN=10V
Ptot = f(T A) @ R thJA=55 K/W
5
60
max.
W
mΩ
Rthjc = 1.1 K/W
R DS(on)
4
Ptot
3.5
3
2.5
40
typ.
30
2
SMD @ 6cm2
20
1.5
1
10
0.5
0
-50
-25
0
25
50
75
100
°C
0
-50
150
-25
0
25
50
75
100 125 °C
TA;TC
175
Tj
3 On-state resistance
4 Typ. input threshold voltage
R ON = f(T j); ID= 12.6A; V IN=5V
VIN(th) = f(T j); I D = 1.2 mA; V DS = 12V
80
2
V
mΩ
max.
50
VGS(th)
R DS(on)
1.6
60
typ.
40
1.4
1.2
1
0.8
30
0.6
20
0.4
10
0
-50
0.2
-25
0
25
50
75
100 125 °C
0
-50
175
Tj
Datasheet
-25
0
25
50
75
100
°C
150
Tj
6
Rev. 1.3, 2006-12-22
Smart Low Side Power Switch
Power HITFET BTS 3142D
5 Typ. transfer characteristics
6 Typ. short circuit current
ID=f(V IN); V DS=12V; TJstart =25°C
ID(lim) = f(T j); VDS=12V
Parameter: V IN
50
60
A
A
50
40
45
35
ID
ID
40
30
35
25
30
Vin=10V
20
25
5V
20
15
15
10
10
5
5
0
1
2
3
4
5
6
7
V
8
0
-50
10
-25
0
25
50
75
100 125 °C
VIN
175
Tj
7 Typ. output characteristics
8 Typ. off-state drain current
ID=f(V DS); TJstart=25°C
I DSS = f(T j)
Parameter: V IN
60
25
A
µA
50
10V
45
7V
max.
20
I DSS
6V
40
ID
5V
35
4V
30
17.5
15
12.5
25
10
20
7.5
15
Vin=3V
5
10
typ.
2.5
5
0
0
1
2
3
4
V
0
-50
6
VDS
Datasheet
-25
0
25
50
75
100 125 °C
175
Tj
7
Rev. 1.3, 2006-12-22
Smart Low Side Power Switch
Power HITFET BTS 3142D
9 Typ. overload current
10 Typ. transient thermal impedance
I D(lim) = f(t), Vbb=12 V, no heatsink
Z thJA=f(t p) @ 6 cm2 cooling area
Parameter: Tjstart
Parameter: D=tp/T
10
70
2
K/W
A
D=0.5
-40°C
10
1
0.2
25°C
Z thJA
I D(lim)
0.1
50
85°C
40
0.05
10
0
0.02
0.01
30
10
-1
10
-2
10
-3
150°C
20
Single pulse
10
0
0
0.5
1
1.5
2
2.5
3
3.5
4
ms
t
5
10
-7
10
-6
10
-5
10
-4
10
-3
10
-2
10
-1
10
0
10
1
s
10
3
tp
11 Determination of ID(lim)
I D(lim) = f(t); tm = 200µs
Parameter: TJstart
70
A
I D(lim)
-40°C
50
25°C
40
85°C
30
150°C
20
10
0
0
0.1
0.2
0.3
0.4
ms
0.6
t
Datasheet
8
Rev. 1.3, 2006-12-22
Smart Low Side Power Switch
Power HITFET BTS 3142D
Package Outlines
Package Outlines
6.5 +0.15
-0.05
A
0.15 MAX.
per side
B
(5)
0.5 +0.08
-0.04
0.9 +0.20
-0.01
0...0.15
0.8 ±0.15
(4.24) 1 ±0.1
9.98 ±0.5
6.22 -0.2
5.4 ±0.1
2.3 +0.05
-0.10
0.51 MIN.
1
3x
0.75 ±0.1
0.5 +0.08
-0.04
2.28
4.57
0.1 B
0.25
M
A B
All metal surfaces tin plated,
except area of cut.
GPT09277
Figure 1
PG-TO252-3-11 (Plastic Dual Small Outline Package) (RoHS-Compliant)
To meet the world-wide customer requirements for environmentally friendly products and to be compliant with
government regulations the device is available as a green product. Green products are RoHS-Compliant (i.e Pbfree finish on leads and suitable for Pb-free soldering according to IPC/JEDEC J-STD-020).
Please specify the package needed (e.g. green package) when placing an order
You can find all of our packages, sorts of packing and others in our
Infineon Internet Page “Products”: http://www.infineon.com/products.
Datasheet
9
Dimensions in mm
Rev. 1.3, 2006-12-22
Smart Low Side Power Switch
Power HITFET BTS 3142D
Revision History
2
Revision History
Version
Rev. 1.3
Date
Changes
2006-12-22
released automotive green and robust version (BTS)
Package parameter (humidity and climatic) removed in Maximum ratings
Rev. 1.2
2006-12-11
AEC icon added
RoHS icon added
Green product (RoHS-compliant) added to the feature list
Package information updated to green
Green explanation added
Rev. 1.1
2006-08-08
released non automotive green version (ITS)
Rev. 1.0
2004-03-05
released production version
Datasheet
10
Rev. 1.3, 2006-12-22
Edition 2006-12-22
Published by
Infineon Technologies AG
81726 Munich, Germany
© Infineon Technologies AG 2007.
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values
stated herein and/or any information regarding the application of the device, Infineon Technologies hereby
disclaims any and all warranties and liabilities of any kind, including without limitation warranties of
non-infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.