Product Overview MC10E112: ECL Quad Driver For complete documentation, see the data sheet Product Description The MC10E/100E112 is a quad driver with two pairs of OR/NOR outputs from each gate, and a common, buffered enable input. Using the data inputs the device can serve as an ECL memory address fan-out driver. Using just the enable input, the device serves as a clock driver, although the MC10E/100E111 is designed specifically for this purpose, and offers lower skew than the E112. For memory address driver applications where scan capabilities are required, please refer to the E212 device. The 100 Series contains temperature compensation. Features • • • • • • • • 600ps Max. Propagation Delay Common Enable Input PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V NECL Mode Operating Range: VCC = 0 V with VEE = -4.2 V to -5.7 V Internal Input Pulldown Resistors ESD Protection: > 2 KV HBM, > 200 V MM Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test Moisture Sensitivity Level 1 For Additional Information, see Application Note AND8003/D • Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34 • Transistor Count = 125 devices For more features, see the data sheet Part Electrical Specifications Product Compliance Status Type Chann els Input / Input Output Level Ratio Output VCC Level Typ (V) tJitterR MS Typ (ps) tskew(oo) Max (ps) tpd Typ (ns) tR & tF Max (ps) fmaxClo fmaxDat Packa ck Typ a Typ ge (MHz) (Mbps) Type MC10E112FNR2G Pb-free Active Signal Driver 4 1:2 ECL <1 40 0.55 700 700 Halide free ECL 5 For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016 PLCC28