Product Overview NCP391: Positive Overvoltage Protection Controller with Internal Low RON NMOS FET For complete documentation, see the data sheet Product Description The NCP391 is able to disconnect the systems from its output pin in case wrong input operating conditions are detected. The system is positive overvoltage protected up to +28 V. Due to this device using internal NMOS, no external device is necesary, reducing the system cost and the PCB area of the application board. The NCP391 is able to instantaneously disconnect the output from the input, due to integrated Low Ron Power NMOS (120 mΩ, if the input voltage exceeds the overvoltage threshold (OVLO) or undervoltage threshold (UVLO)). At powerup (EN(BAR) pin = low level), the Vout turns on ton after the Vin exceeds the undervoltage threshold. The NCP391 provides a negative going flag(FLAG(BAR)) output, which alerts the system that a fault has occurred. In addition, the device has ESD-protected input (15 kV Air) when bypassed with a 1.0 µF or larger capacitor. Features • • • • • • • • Benefits Overvoltage Protection up to 28 V On-Chip Low RDS(on) NMOS Transistor: 120 mΩ Overvoltage Lockout (OVLO) Undervoltage Lockout (UVLO) Internal Soft start Alert FLAG(BAR) Output Shutdown EN(BAR) Input ESD Ratings: Machine Model = B, Human Body Model = 3 Applications • Low voltage battery charger can be used • No external pass Mosfet is required End Products • Over-Voltage Protection • Cell Phones, Camera Phones, Digital Still Cameras, PDA, Tablet, Wireless accessory and MP3 Players Part Electrical Specifications Product Compliance Status VCC Min (V) VCC Max (V) P(AV) Max (W) VIT+ Typ (V) VIT Typ (V) IDDH Max (µA) TA Min (°C) TA Max (°C) Package Type NCP391FCALT2G Pb-free Active 1.2 28 0.69 7.4 7.3 170 40 125 WLCSP-6 Active 1.2 28 0.69 7.4 7.3 170 40 125 WLCSP-6 Halide free NCP391FCCADT2G Pb-free Halide free Application Diagram For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016