SPD08P06P G SIPMOS® Power-Transistor Product Summary Features • P-Channel • Enhancement mode V DS -60 V R DS(on),max 0.3 Ω ID -8.8 A • Avalanche rated • dv /dt rated PG-TO252-3 • 175°C operating temperature • Pb-free lead finishing; RoHS compliant Type Package Tape and reel information SPD08P06PG PG-TO252-3 1000 pcs / reel Parameter Marking Lead free 08P06P Yes Value Symbol Conditions Packing Non dry Unit steady state Continuous drain current ID T A=25 °C -8.83 T A=100 °C -6.25 -35.32 Pulsed drain current I D,pulse T A=25 °C Avalanche energy, single pulse E AS I D=8.83 A, R GS=25 Ω Avalanche energy, periodic limited by E AR Tjmax Reverse diode dv /dt dv /dt Gate source voltage V GS Power dissipation P tot Operating and storage temperature T j, T stg A 70 mJ -6 kV/µs 4.2 I D=8.83 A, V DS=48 V, di /dt =-200 A/µs, T j,max=175 °C T A=25 °C ±20 V 42 W "-55 ... +175" °C ESD class 260 °C Soldering temperature 55/175/56 IEC climatic category; DIN IEC 68-1 Rev 1.9 page 1 2008-10-13 SPD08P06P G G Parameter Symbol Conditions Unit Values min. typ. max. Thermal characteristics Thermal resistance, junction - case R thJC - - Thermal resistance, junction - ambient,leaded R thJA - - - SMD version, device on PCB: R thJA minimal footprint - - 75 6 cm2 cooling area1) - - 70 50 3.6 K/W K/W Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS=0 V, I D=-250 µA -60 - - Gate threshold voltage V GS(th) V DS=V GS, I D=-250 µA -2.1 -3.0 -4 Zero gate voltage drain current I DSS V DS=-60 V, V GS=0 V, T j=25 °C - -0.1 -1 V DS=-60 V, V GS=0 V, T j=150 °C - -10 -100 V µA Gate-source leakage current I GSS V GS=-20 V, V DS=0 V - -10 -100 nA Drain-source on-state resistance R DS(on) V GS=-6.2 V, I D=-10 A - 230 300 mΩ Transconductance g fs |V DS|>2|I D|R DS(on)max, I D=-6.2 A 2.5 4.9 - S 1) Device on 40mm*40mm*1.5mm epoxy PCB FR4 with 6 cm2 ( one layer, 70µ, thick) copper area for drain connection. PCB is vertical without blown air. Rev 1.9 page 2 2008-10-13 SPD08P06P G Parameter Values Symbol Conditions Unit min. typ. max. - 335 420 - 105 135 Dynamic characteristics Input capacitance C iss Output capacitance C oss Reverse transfer capacitance C rss - 65 95 Turn-on delay time t d(on) - 16.0 24.0 Rise time tr - 46.0 69 Turn-off delay time t d(off) - 48 72 Fall time tf - 14 21 Gate to source charge Q gs - -1.9 -2.6 Gate to drain charge Q gd - -5 -8 Gate charge total Qg - -10 -13 Gate plateau voltage V plateau - -6 - V - - -8.80 A - - -35.3 - -0.98 -1.55 V - 60 90 ns - 100 150 nC V GS=0 V, V DS=-25 V, f =1 MHz V DD=-30 V, V GS=10 V, I D=-6.2 A, R G=6 Ω pF Gate Charge Characteristics V DD=-48 V, I D=-8.8 A, V GS=0 to -10 V nC Reverse Diode Diode continuous forward current IS Diode pulse current I S,pulse Diode forward voltage V SD Reverse recovery time t rr Reverse recovery charge Rev 1.9 Q rr T A=25 °C V GS=0 V, I F=-8.83 A, T j=25 °C V R=30 V, I F=|I S|, di F/dt =100 A/µs page 3 2008-10-13 SPD08P06P G 1 Power dissipation 2 Drain current P tot=f(T A) I D=f(T A); |V GS|≥10 V 9 40 8 7 6 -I D [A] P tot [W] 30 20 5 4 3 10 2 1 0 0 0 40 80 120 0 160 40 80 T A [°C] 120 160 T A [°C] 3 Safe operating area 4 Max. transient thermal impedance I D=f(V DS); T A=25 °C; D =0 Z thJA=f(t p) parameter: t p parameter: D =t p/T 102 101 10 µs limited by on-state resistance 10 100 µs 1 0.5 1 ms 100 0.2 Z thJS [K/W] -I D [A] 10 ms DC 10 0 0.1 0.05 0.02 0.01 10-1 10 10-1 single pulse -5 10-4 10-3 10-2 10-1 100 101 102 10-2 10-1 100 101 102 -V DS [V] Rev 1.9 t p [s] page 4 2008-10-13 SPD08P06P G 5 Typ. output characteristics 6 Typ. drain-source on resistance I D=f(V DS); T j=25 °C R DS(on)=f(I D); T j=25 °C parameter: V GS parameter: V GS 1000 -20 V 18 900 800 -10 V 15 700 R DS(on) [mΩ] -7 V -I D [A] 12 9 -6 V 600 -5 V -5.5 V 400 300 -5V 200 -4.5 V 100 3 -4.5 V 500 -5.5 V 6 -4 V -6 V -7 V -10 V -20V -4 V 0 0 0 1 2 3 4 5 6 7 0 8 2 4 6 -V DS [V] 8 10 12 14 -I D [A] 7 Typ. transfer characteristics 8 Typ. forward transconductance I D=f(V GS); |V DS|>2|I D|R DS(on)max g fs=f(I D); T j=25 °C 6 6 5 5 4 4 g fs [S] -I D [A] parameter: T j 3 2 3 2 1 1 125 °C 25 °C 0 0 0 1 2 3 4 5 6 7 8 Rev 1.9 0 2 4 6 8 10 -I D [A] -V GS [V] page 5 2008-10-13 SPD08P06P G 9 Drain-source on-state resistance 10 Typ. gate threshold voltage R DS(on)=f(T j); I D=-6.2 A; V GS=-10 V V GS(th)=f(T j); V GS=V DS; I D=-250 µA 700 5 4.5 600 max. 4 3.5 98 % 400 -V GS(th) [V] R DS(on) [mΩ] 500 300 3 typ. 2.5 2 min. 1.5 200 typ. 1 100 0.5 0 0 -60 -20 20 60 100 140 180 -60 -20 20 T j [°C] 60 100 140 180 T j [°C] 11 Typ. capacitances 12 Forward characteristics of reverse diode C =f(V DS); V GS=0 V; f =1 MHz I F=f(V SD) parameter: T j 103 175 °C, typ Ciss 101 25 °C, 98% I F [A] C [pF] Coss 102 100 175 °C, 98% Crss 10-1 25 °C, typ 101 10-2 0 5 10 15 20 25 -V DS [V] Rev 1.9 0 0.5 1 1.5 2 2.5 3 -V SD [V] page 6 2008-10-13 SPD08P06P G 13 Avalanche characteristics 14 Typ. gate charge I AS=f(t AV); R GS=25 Ω V GS=f(Q gate); I D=-8.8 A pulsed parameter: T j(start) parameter: V DD 16 101 14 12 25 °C 30 V 100 °C 12 V 48 V 10 -I AV [A] V GS [V] 125 °C 8 6 4 2 100 0 100 101 102 103 t AV [µs] 0 3 6 9 12 15 Q gate [nC] 15 Drain-source breakdown voltage V BR(DSS)=f(T j); I D=-250 µA 70 -V BR(DSS) [V] 65 60 55 50 -60 -20 20 60 100 140 180 T j [°C] Rev 1.9 page 7 2008-10-13 SPD08P06P G Package outline: PG-TO252-3 Rev 1.9 page 8 2008-10-13 SPD08P06P G Published by Infineon Technologies AG 81726 Munich, Germany © 2008 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com ). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev 1.9 page 9 2008-10-13