PHILIPS BUJ303A

Philips Semiconductors
Product specification
Silicon Diffused Power Transistor
BUJ303A
GENERAL DESCRIPTION
High-voltage, high-speed planar-passivated npn power switching transistor in a TO220AB envelope intended for
use in high frequency electronic lighting ballast applications, converters, inverters, switching regulators, motor
control systems, etc.
QUICK REFERENCE DATA
SYMBOL
PARAMETER
CONDITIONS
TYP.
MAX.
UNIT
VCESM
VCBO
VCEO
IC
ICM
Ptot
VCEsat
hFEsat
tf
Collector-emitter voltage peak value
Collector-Base voltage (open emitter)
Collector-emitter voltage (open base)
Collector current (DC)
Collector current peak value
Total power dissipation
Collector-emitter saturation voltage
DC current gain
Fall time
VBE = 0 V
0.25
12
145
1000
1000
500
5
10
100
1.5
160
V
V
V
A
A
W
V
PINNING - TO220AB
PIN
base
2
collector
3
emitter
tab
PIN CONFIGURATION
DESCRIPTION
1
Tmb ≤ 25 ˚C
IC = 3 A; IB = 0.6 A
IC = 3 A; VCE = 5 V
IC=2.5 A,IB1=0.5 A
ns
SYMBOL
c
tab
b
collector
e
1 23
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum Rating System (IEC 134)
SYMBOL
PARAMETER
CONDITIONS
VCESM
VCEO
VCBO
IC
ICM
IB
IBM
Ptot
Tstg
Tj
Collector to emitter voltage
Collector to emitter voltage (open base)
Collector to base voltage (open emitter)
Collector current (DC)
Collector current peak value
Base current (DC)
Base current peak value
Total power dissipation
Storage temperature
Junction temperature
VBE = 0 V
Tmb ≤ 25 ˚C
MIN.
MAX.
UNIT
-65
-
1000
500
1000
5
10
2
4
100
150
150
V
V
V
A
A
A
A
W
˚C
˚C
TYP.
MAX.
UNIT
-
1.25
K/W
60
-
K/W
THERMAL RESISTANCES
SYMBOL
PARAMETER
Rth j-mb
Junction to mounting base
Rth j-a
Junction to ambient
September 1998
CONDITIONS
in free air
1
Rev 1.000
Philips Semiconductors
Product specification
Silicon Diffused Power Transistor
BUJ303A
STATIC CHARACTERISTICS
Tmb = 25 ˚C unless otherwise specified
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNIT
ICES,ICBO
ICES
Collector cut-off current 1
VBE = 0 V; VCE = VCESMmax
VBE = 0 V; VCE = VCESMmax;
Tj = 125 ˚C
-
-
1.0
2.0
mA
mA
ICEO
Collector cut-off current 1
VCEO = VCEOMmax(500V)
-
-
0.1
mA
IEBO
VCEOsust
Emitter cut-off current
Collector-emitter sustaining voltage
500
-
0.1
-
mA
V
VCEsat
VBEsat
hFE
hFE
Collector-emitter saturation voltage
Base-emitter saturation voltage
DC current gain
VEB = 9 V; IC = 0 A
IB = 0 A; IC = 100 mA;
L = 25 mH
IC = 3 A; IB = 0.6 A
IC = 3 A; IB = 0.6 A
IC = 5 mA; VCE = 5 V
IC = 500 mA; VCE = 5 V
10
14
0.25
0.97
22
25
1.5
1.3
35
35
V
V
hFEsat
DC current gain
IC = 2.5 A; VCE = 5 V
IC = 3 A; VCE = 5 V
10
-
13.5
12
17
-
TYP.
MAX.
UNIT
0.5
3.3
0.33
0.7
4
0.45
µs
µs
µs
1.4
145
1.6
160
µs
ns
1.7
160
1.9
200
µs
ns
DYNAMIC CHARACTERISTICS
Tmb = 25 ˚C unless otherwise specified
SYMBOL
ton
ts
tf
PARAMETER
CONDITIONS
Switching times (resistive load)
ICon = 2.5 A; IBon = -IBoff = 0.5 A;
RL = 75 ohms; VBB2 = 4 V;
Turn-on time
Turn-off storage time
Turn-off fall time
Switching times (inductive load)
ts
tf
Turn-off storage time
Turn-off fall time
Switching times (inductive load)
ts
tf
Turn-off storage time
Turn-off fall time
ICon = 2.5 A; IBon = 0.5 A; LB = 1 µH;
-VBB = 5 V
ICon = 2.5 A; IBon = 0.5 A; LB = 1 µH;
-VBB = 5 V; Tj = 100 ˚C
1 Measured with half sine-wave voltage (curve tracer).
September 1998
2
Rev 1.000
Philips Semiconductors
Product specification
Silicon Diffused Power Transistor
BUJ303A
ICon
90 %
+ 50v
100-200R
90 %
IC
10 %
ts
Horizontal
ton
tf
toff
Oscilloscope
IBon
IB
Vertical
10 %
300R
1R
tr
30ns
6V
30-60 Hz
-IBoff
Fig.1. Test circuit for VCEOsust.
Fig.4. Switching times waveforms with resistive load.
VCC
IC / mA
LC
250
200
IBon
LB
100
T.U.T.
-VBB
0
min
VCE / V
VCEOsust
Fig.2. Oscilloscope display for VCEOsust.
Fig.5. Test circuit inductive load.
VCC = 300 V; -VBE = 5 V; LC = 200 uH; LB = 1 uH
VCC
ICon
90 %
IC
RL
VIM
10 %
RB
0
T.U.T.
ts
toff
tp
IB
tf
t
IBon
T
t
-IBoff
Fig.3. Test circuit resistive load. VIM = -6 to +8 V
VCC = 250 V; tp = 20 µs; δ = tp / T = 0.01.
RB and RL calculated from ICon and IBon requirements.
September 1998
Fig.6. Switching times waveforms with inductive load.
3
Rev 1.000
Philips Semiconductors
Product specification
Silicon Diffused Power Transistor
120
BUJ303A
Normalised Power Derating
PD%
VBEsat/V
110
1.4
100
90
1.2
80
1.0
70
0.8
60
50
0.6
40
30
0.4
20
10
0.2
0
0.0
0
20
40
60
80
100
Tmb / C
120
140
0.1
1.0
IC/A
10.0
Fig.10. Base-Emitter saturation voltage.
Solid lines = typ values, VBEsat = f(IC); at IC/IB =4.
Fig.7. Normalised power dissipation.
PD% = 100⋅PD/PD 25˚C = f (Tmb)
h FE
VCEsat/V
100
0.5
5V
0.4
0.3
10
0.2
Tj = 25 C
1
0.01
1V
0.1
0.0
0.1
1
10
0.1
1.0
IC/A
IC / A
Fig.8. Typical DC current gain. hFE = f(IC)
parameter VCE
2.0
10.0
Fig.11. Collector-Emitter saturation voltage.
Solid lines = typ values, VCEsat = f(IC); at IC/IB =4.
VCEsat/V
10
Zth / (K/W)
1.6
IC=1A
2A
3A
4A
1
D= 0.5
1.2
0.8
0.1
0.2
0.1
0.05
0.02
0
PD
tp
D=
tp
T
0.4
T
0.0
0.01
0.10
IB/A
1.00
0.01
1E-06
10.00
1E-02
t/s
1E+00
Fig.12. Transient thermal impedance.
Zth j-mb = f(t); parameter D = tp/T
Fig.9. Collector-Emitter saturation voltage.
Solid lines = typ values, VCEsat = f(IB); Tj=25˚C.
September 1998
1E-04
t
4
Rev 1.000
Philips Semiconductors
Product specification
Silicon Diffused Power Transistor
BUJ303A
IC/A
VCC
100
LC
Duty cycle = 0.01
ICM max
10
tp=
VCL
IBon
LB
IC max
-VBB
10us
II
T.U.T.
(1)
100us
1
Fig.13. Test Circuit for reverse bias safe operating
area.
Vcl ≤ 1000V; Vcc = 150V; VBB = -5V; LB = 1µH; Lc =
200µH
1ms
(2)
10ms
I
0.1
DC
III
IC/V
11
0.01
10
1
9
10
100
1,000
VCE/V
8
Fig.15. Forward bias safe operating area. Ths ≤ 25 ˚C
7
(1)
(2)
I
II
III
6
5
4
3
2
1
NB:
0
0
200
400
600
800
1,000
1,200
VCE CLAMP/V
Fig.14. Reverse bias safe operating area Tj ≤ Tjmax
September 1998
5
Ptot max and Ptot peak max lines.
Second breakdown limits.
Region of permissible DC operation.
Extension for repetitive pulse operation.
Extension during turn-on in single
transistor converters provided that
RBE ≤ 100 Ω and tp ≤ 0.6 µs.
Mounted with heatsink compound and
30 ± 5 newton force on the centre of the
envelope.
Rev 1.000
Philips Semiconductors
Product specification
Silicon Diffused Power Transistor
BUJ303A
MECHANICAL DATA
Dimensions in mm
4,5
max
Net Mass: 2 g
10,3
max
1,3
3,7
2,8
5,9
min
15,8
max
3,0 max
not tinned
3,0
13,5
min
1,3
max 1 2 3
(2x)
0,9 max (3x)
2,54 2,54
0,6
2,4
Fig.16. TO220AB; pin 2 connected to mounting base.
Notes
1. Refer to mounting instructions for TO220 envelopes.
2. Epoxy meets UL94 V0 at 1/8".
September 1998
6
Rev 1.000
Philips Semiconductors
Product specification
Silicon Diffused Power Transistor
BUJ303A
DEFINITIONS
Data sheet status
Objective specification
This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification
This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
 Philips Electronics N.V. 1998
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.
September 1998
7
Rev 1.000