PHILIPS BUK456-100B

Philips Semiconductors
Product specification
PowerMOS transistor
GENERAL DESCRIPTION
N-channel enhancement mode
field-effect power transistor in a
plastic envelope.
The device is intended for use in
Switched Mode Power Supplies
(SMPS), motor control, welding,
DC/DC and AC/DC converters, and
in general purpose switching
applications.
PINNING - TO220AB
PIN
QUICK REFERENCE DATA
SYMBOL
PARAMETER
MAX.
MAX.
UNIT
VDS
ID
Ptot
Tj
RDS(ON)
BUK456
Drain-source voltage
Drain current (DC)
Total power dissipation
Junction temperature
Drain-source on-state
resistance
-100A
100
34
150
175
0.057
-100B
100
32
150
175
0.065
V
A
W
˚C
Ω
PIN CONFIGURATION
DESCRIPTION
1
gate
2
drain
3
source
tab
BUK456-100A/B
SYMBOL
d
tab
g
drain
s
1 23
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134)
SYMBOL
PARAMETER
CONDITIONS
MIN.
MAX.
UNIT
VDS
VDGR
±VGS
Drain-source voltage
Drain-gate voltage
Gate-source voltage
RGS = 20 kΩ
-
-
100
100
30
V
V
V
ID
ID
IDM
Drain current (DC)
Drain current (DC)
Drain current (pulse peak value)
Tmb = 25 ˚C
Tmb = 100 ˚C
Tmb = 25 ˚C
-
Ptot
Tstg
Tj
Total power dissipation
Storage temperature
Junction temperature
Tmb = 25 ˚C
-
- 55
-
-100A
34
24
136
-100B
32
22
128
A
A
A
150
175
175
W
˚C
˚C
THERMAL RESISTANCES
SYMBOL
PARAMETER
Rth j-mb
Thermal resistance junction to
mounting base
Thermal resistance junction to
ambient
Rth j-a
April 1998
CONDITIONS
1
MIN.
TYP.
MAX.
UNIT
-
-
1.0
K/W
-
60
-
K/W
Rev 1.100
Philips Semiconductors
Product specification
PowerMOS transistor
BUK456-100A/B
STATIC CHARACTERISTICS
Tmb = 25 ˚C unless otherwise specified
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNIT
V(BR)DSS
Drain-source breakdown
voltage
Gate threshold voltage
Zero gate voltage drain current
Zero gate voltage drain current
Gate source leakage current
Drain-source on-state
resistance
VGS = 0 V; ID = 0.25 mA
100
-
-
V
VDS = VGS; ID = 1 mA
VDS = 100 V; VGS = 0 V; Tj = 25 ˚C
VDS = 100 V; VGS = 0 V; Tj =125 ˚C
VGS = ±30 V; VDS = 0 V
VGS = 10 V;
BUK456-100A
BUK456-100B
ID = 15 A
2.1
-
3.0
1
0.1
10
0.052
0.06
4.0
10
1.0
100
0.057
0.065
V
µA
mA
nA
Ω
Ω
MIN.
TYP.
MAX.
UNIT
12
16
-
S
VGS(TO)
IDSS
IDSS
IGSS
RDS(ON)
DYNAMIC CHARACTERISTICS
Tmb = 25 ˚C unless otherwise specified
SYMBOL
PARAMETER
CONDITIONS
gfs
Forward transconductance
VDS = 25 V; ID = 15 A
Ciss
Coss
Crss
Input capacitance
Output capacitance
Feedback capacitance
VGS = 0 V; VDS = 25 V; f = 1 MHz
-
1500
450
130
2000
600
200
pF
pF
pF
td on
tr
td off
tf
Turn-on delay time
Turn-on rise time
Turn-off delay time
Turn-off fall time
VDD = 30 V; ID = 3 A;
VGS = 10 V;
Rgen = 50 Ω;
RGS = 50 Ω
-
20
40
150
65
30
60
200
85
ns
ns
ns
ns
Ld
Internal drain inductance
-
3.5
-
nH
Ld
Internal drain inductance
-
4.5
-
nH
Ls
Internal source inductance
Measured from contact screw on
tab to centre of die
Measured from drain lead 6 mm
from package to centre of die
Measured from source lead 6 mm
from package to source bond pad
-
7.5
-
nH
REVERSE DIODE LIMITING VALUES AND CHARACTERISTICS
Tmb = 25 ˚C unless otherwise specified
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
MAX.
UNIT
IDR
-
-
-
34
A
IDRM
VSD
Continuous reverse drain
current
Pulsed reverse drain current
Diode forward voltage
IF = 34 A ; VGS = 0 V
-
1.8
136
2.5
A
V
trr
Qrr
Reverse recovery time
Reverse recovery charge
IF = 34 A; -dIF/dt = 100 A/µs;
VGS = 0 V; VR = 30 V
-
100
1.0
-
ns
µC
April 1998
2
Rev 1.100
Philips Semiconductors
Product specification
PowerMOS transistor
Normalised Power Derating
PD%
120
BUK456-100A/B
Zth j-mb / (K/W)
10
BUKx56-lv
110
100
90
D=
1
80
0.5
70
0.2
0.1
0.05
60
0.1
50
0.02
40
30
0.01
tp
PD
D=
0
20
10
0
0
20
40
60
80 100
Tmb / C
120
140
160
180
1E-05
Fig.1. Normalised power dissipation.
PD% = 100⋅PD/PD 25 ˚C = f(Tmb)
1E-03
t/s
1E-01
1E+01
Fig.4. Transient thermal impedance.
Zth j-mb = f(t); parameter D = tp/T
Normalised Current Derating
ID%
120
t
T
0.001
tp
T
70
ID / A
110
60
100
90
20
VGS / V =
15
10
BUK456-100A
8
7
50
80
70
40
6
60
30
50
40
20
30
5
20
10
10
0
0
0
20
40
60
80 100
Tmb / C
120
140
160
180
ID / A
2
4
0.2
RDS(ON) / Ohm
4.5 5
VD
)=
100
N
(O
10
BUK456-100A
5.5
6
6.5
7
VGS / V =
A
B
S
RD
8
Fig.5. Typical output characteristics, Tj = 25 ˚C.
ID = f(VDS); parameter VGS
BUK456-100A,B
ID
S/
6
VDS / V
Fig.2. Normalised continuous drain current.
ID% = 100⋅ID/ID 25 ˚C = f(Tmb); conditions: VGS ≥ 10 V
1000
4
0
7.5
8
tp = 10 us
10
0.1
100 us
10
20
1 ms
DC
10 ms
100 ms
1
0
1
100
10
1000
VDS / V
Fig.3. Safe operating area. Tmb = 25 ˚C
ID & IDM = f(VDS); IDM single pulse; parameter tp
April 1998
0
20
40
ID / A
60
80
Fig.6. Typical on-state resistance, Tj = 25 ˚C.
RDS(ON) = f(ID); parameter VGS
3
Rev 1.100
Philips Semiconductors
Product specification
PowerMOS transistor
BUK456-100A/B
ID / A
70
VGS(TO) / V
BUK456-100A
max.
25
Tj / C =
60
4
150
typ.
50
3
40
min.
2
30
20
1
10
0
0
0
2
4
6
8
10
-60
-20
20
VGS / V
100
140
180
Fig.10. Gate threshold voltage.
VGS(TO) = f(Tj); conditions: ID = 1 mA; VDS = VGS
Fig.7. Typical transfer characteristics.
ID = f(VGS) ; conditions: VDS = 25 V; parameter Tj
gfs / S
60
Tj / C
BUK456-100A
SUB-THRESHOLD CONDUCTION
ID / A
1E-01
20
1E-02
2%
1E-03
10
typ
98 %
1E-04
1E-05
1E-06
0
0
20
40
ID / A
60
0
Fig.8. Typical transconductance, Tj = 25 ˚C.
gfs = f(ID); conditions: VDS = 25 V
2.4
2
VGS / V
3
4
Fig.11. Sub-threshold drain current.
ID = f(VGS); conditions: Tj = 25 ˚C; VDS = VGS
Normalised RDS(ON) = f(Tj)
a
1
10000
C / pF
BUK4y6-100
2.2
2.0
1.8
Ciss
1.6
1000
1.4
Coss
1.2
1.0
0.8
100
Crss
0.6
0.4
0.2
0
-60
-20
20
60
Tj / C
100
140
10
180
0
40
VDS / V
Fig.9. Normalised drain-source on-state resistance.
a = RDS(ON)/RDS(ON)25 ˚C = f(Tj); ID = 15 A; VGS = 10 V
April 1998
20
Fig.12. Typical capacitances, Ciss, Coss, Crss.
C = f(VDS); conditions: VGS = 0 V; f = 1 MHz
4
Rev 1.100
Philips Semiconductors
Product specification
PowerMOS transistor
BUK456-100A/B
BUK456-100
VGS / V
12
70
VDS / V =20
10
IF / A
BUK456-100A
60
50
8
80
40
Tj / C = 150
6
25
30
4
20
2
0
10
0
0
20
40
0
QG / nC
Fig.13. Typical turn-on gate-charge characteristics.
VGS = f(QG); conditions: ID = 34 A; parameter VDS
April 1998
1
VSDS / V
2
Fig.14. Typical reverse diode current.
IF = f(VSDS); conditions: VGS = 0 V; parameter Tj
5
Rev 1.100
Philips Semiconductors
Product specification
PowerMOS transistor
BUK456-100A/B
MECHANICAL DATA
Dimensions in mm
4,5
max
Net Mass: 2 g
10,3
max
1,3
3,7
2,8
5,9
min
15,8
max
3,0 max
not tinned
3,0
13,5
min
1,3
max 1 2 3
(2x)
0,9 max (3x)
2,54 2,54
0,6
2,4
Fig.15. SOT78 (TO220AB); pin 2 connected to mounting base.
Notes
1. Observe the general handling precautions for electrostatic-discharge sensitive devices (ESDs) to prevent
damage to MOS gate oxide.
2. Refer to mounting instructions for SOT78 (TO220) envelopes.
3. Epoxy meets UL94 V0 at 1/8".
April 1998
6
Rev 1.100
Philips Semiconductors
Product specification
PowerMOS transistor
BUK456-100A/B
DEFINITIONS
Data sheet status
Objective specification
This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification
This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
 Philips Electronics N.V. 1998
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.
April 1998
7
Rev 1.100