Philips Semiconductors Product specification TrenchMOS transistor Logic level FET GENERAL DESCRIPTION N-channel enhancement mode logic level field-effect power transistor in a plastic envelope using ’trench’ technology which features very low on-state resistance. It is intended for use in automotive and general purpose switching applications. PINNING - TO220AB PIN BUK9505-30A QUICK REFERENCE DATA SYMBOL PARAMETER VDS ID Ptot Tj RDS(ON) Drain-source voltage Drain current (DC) Total power dissipation Junction temperature Drain-source on-state resistance VGS = 5 V VGS = 10 V PIN CONFIGURATION MAX. UNIT 30 75 230 175 V A W ˚C 5 4.6 mΩ mΩ SYMBOL DESCRIPTION d tab 1 gate 2 drain 3 source g tab drain s 1 23 LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VDS VDGR ±VGS ±VGSM Drain-source voltage Drain-gate voltage Gate-source voltage Non-repetitive gate-source voltage RGS = 20 kΩ tp≤50µS - 30 30 10 15 V V V V ID ID IDM Ptot Tstg, Tj Drain current (DC) Drain current (DC) Drain current (pulse peak value) Total power dissipation Storage & operating temperature Tmb = 25 ˚C Tmb = 100 ˚C Tmb = 25 ˚C Tmb = 25 ˚C - - 55 75 75 400 230 175 A A A W ˚C TYP. MAX. UNIT - 0.65 K/W 60 - K/W THERMAL RESISTANCES SYMBOL PARAMETER CONDITIONS Rth j-mb Thermal resistance junction to mounting base Thermal resistance junction to ambient - Rth j-a August 1999 in free air 1 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Logic level FET BUK9505-30A STATIC CHARACTERISTICS Tj= 25˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS V(BR)DSS Drain-source breakdown voltage Gate threshold voltage VGS = 0 V; ID = 0.25 mA; VGS(TO) Tj = -55˚C VDS = VGS; ID = 1 mA Tj = 175˚C Tj = -55˚C IDSS Zero gate voltage drain current VDS = 30 V; VGS = 0 V; IGSS RDS(ON) Gate source leakage current Drain-source on-state resistance VGS = ±10 V; VDS = 0 V VGS = 5 V; ID = 25 A Tj = 175˚C Tj = 175˚C VGS = 10 V; ID = 25 A VGS = 4.5 V; ID = 25 A MIN. TYP. MAX. UNIT 30 27 1 0.5 - 1.5 0.05 2 4.3 3.9 - 2.0 2.3 10 500 100 5 9.3 4.6 5.4 V V V V V µA µA nA mΩ mΩ mΩ mΩ MIN. TYP. MAX. UNIT DYNAMIC CHARACTERISTICS Tmb = 25˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS Ciss Coss Crss Input capacitance Output capacitance Feedback capacitance VGS = 0 V; VDS = 25 V; f = 1 MHz - 6500 1500 1000 8600 1800 1350 pF pF pF td on tr td off tf Turn-on delay time Turn-on rise time Turn-off delay time Turn-off fall time VDD = 30 V; Rload =1.2Ω; VGS = 5 V; RG = 10 Ω - 45 220 435 320 65 330 600 450 ns ns ns ns Ld Internal drain inductance - 3.5 - nH Ld Internal drain inductance - 4.5 - nH Ls Internal source inductance Measured from contact screw on tab to centre of die Measured from drain lead 6 mm from package to centre of die Measured from source lead 6 mm from package to source bond pad - 7.5 - nH MIN. TYP. MAX. UNIT - - 75 A IF = 25 A; VGS = 0 V IF = 75 A; VGS = 0 V - 0.85 1.1 240 1.2 - A V V IF = 75 A; -dIF/dt = 100 A/µs; VGS = -10 V; VR = 30 V - 400 1.0 - ns µC REVERSE DIODE LIMITING VALUES AND CHARACTERISTICS Tj = 25˚C unless otherwise specified SYMBOL PARAMETER IDR IDRM VSD Continuous reverse drain current Pulsed reverse drain current Diode forward voltage trr Qrr Reverse recovery time Reverse recovery charge August 1999 CONDITIONS 2 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Logic level FET BUK9505-30A AVALANCHE LIMITING VALUE SYMBOL PARAMETER CONDITIONS WDSS Drain-source non-repetitive unclamped inductive turn-off energy ID = 75 A; VDD ≤ 25 V; VGS = 5 V; RGS = 50 Ω; Tmb = 25 ˚C 120 Normalised Power Derating PD% MIN. TYP. MAX. UNIT - - 500 mJ 1000 ID/A 110 100 tp = RDS(ON) = VDS/ID 90 100uS 100 80 70 60 1mS 50 10mS 40 DC 10 100mS 30 20 10 0 0 20 40 60 80 100 Tmb / C 120 140 160 180 1 Normalised Current Derating ID% 10 100 VDS/V Fig.3. Safe operating area. Tmb = 25 ˚C ID & IDM = f(VDS); IDM single pulse; parameter tp Fig.1. Normalised power dissipation. PD% = 100⋅PD/PD 25 ˚C = f(Tmb) 120 1 Zth / (K/W) 1 D= 110 0.5 100 90 0.2 80 0.1 70 0.1 60 0.05 50 0.02 40 PD tp D= 0.01 30 20 T 0 10 tp T t 0 0 20 40 60 80 100 Tmb / C 120 140 160 180 0.001 Fig.2. Normalised continuous drain current. ID% = 100⋅ID/ID 25 ˚C = f(Tmb); conditions: VGS ≥ 5 V August 1999 0.00001 0.001 t/S 0.1 10 Fig.4. Transient thermal impedance. Zth j-mb = f(t); parameter D = tp/T 3 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Logic level FET 400 100 4.8 4.6 4.4 10.0 7.0 ID/V 6.0 5.0 BUK9505-30A VGS/V = ID/A 4.2 80 300 4.0 3.8 3.6 200 60 3.4 Tj/C = 25 175 40 3.2 3.0 2.8 100 20 2.6 2.4 0 0 0 2 4 VDS/V 6 8 10 Fig.5. Typical output characteristics, Tj = 25 ˚C. ID = f(VDS); parameter VGS 0.5 1 1.5 VGS/V 2 2.5 3 3.5 Fig.8. Typical transfer characteristics. ID = f(VGS) ; conditions: VDS = 25 V; parameter Tj RDS(ON)/mOhm 11 0 150 gfs/S 10 9 VGS/V = 100 8 7 3.0 3.2 3.4 3.6 4.0 5.0 6 5 4 3 0 50 20 40 ID/A 60 80 0 100 Fig.6. Typical on-state resistance, Tj = 25 ˚C. RDS(ON) = f(ID); parameter VGS 6.5 0 20 40 ID/A 60 80 100 Fig.9. Typical transconductance, Tj = 25 ˚C. gfs = f(ID); conditions: VDS = 25 V RDS(ON)/mOhm a 30V TrenchMOS 2 6 1.5 5.5 5 1 4.5 4 0.5 3.5 3 3 4 5 6 VGS/V 7 8 9 0 -100 10 Fig.7. Typical on-state resistance, Tj = 25 ˚C. RDS(ON) = f(VGS); conditions: ID = 25 A; August 1999 -50 0 50 Tj / C 100 150 200 Fig.10. Normalised drain-source on-state resistance. a = RDS(ON)/RDS(ON)25 ˚C = f(Tj); ID = 25 A; VGS = 5 V 4 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Logic level FET 2.5 BUK9505-30A 6 BUK959-60 VGS(TO) / V VGS/V max. 5 typ. 4 2 VDS = 1.5 24V 14V 3 min. 1 2 0.5 1 0 -100 -50 0 50 Tj / C 100 150 0 200 Fig.11. Gate threshold voltage. VGS(TO) = f(Tj); conditions: ID = 1 mA; VDS = VGS 20 40 60 QG/nC 80 100 120 Fig.14. Typical turn-on gate-charge characteristics. VGS = f(QG); conditions: ID = 50 A; parameter VDS 100 Sub-Threshold Conduction 1E-01 0 ID/A 80 1E-02 2% 1E-03 typ 60 98% Tj/C = 25 175 40 1E-04 20 1E-05 0 1E-05 0 0.5 1 1.5 2 2.5 0 0.1 0.2 0.3 0.4 3 Fig.12. Sub-threshold drain current. ID = f(VGS); conditions: Tj = 25 ˚C; VDS = VGS 0.5 0.6 0.7 VSDS/V 0.8 0.9 1 1.1 Fig.15. Typical reverse diode current. IF = f(VSDS); conditions: VGS = 0 V; parameter Tj 20 120 WDSS% 110 100 Thousands pF 15 90 80 70 60 10 50 40 Ciss 30 5 20 10 0 0.01 0.1 1 VDS/V 10 Coss Crss 100 0 20 Fig.13. Typical capacitances, Ciss, Coss, Crss. C = f(VDS); conditions: VGS = 0 V; f = 1 MHz August 1999 40 60 80 100 120 Tmb / C 140 160 180 Fig.16. Normalised avalanche energy rating. WDSS% = f(Tmb); conditions: ID = 75 A 5 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Logic level FET BUK9505-30A + VDD + RD L VDS VDS - VGS -ID/100 RGS 0 RG T.U.T. R 01 shunt Fig.17. Avalanche energy test circuit. WDSS = 0.5 ⋅ LID2 ⋅ BVDSS /(BVDSS − VDD ) August 1999 - VGS T.U.T. 0 VDD Fig.18. Switching test circuit. 6 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Logic level FET BUK9505-30A MECHANICAL DATA Dimensions in mm 4,5 max Net Mass: 2 g 10,3 max 1,3 3,7 2,8 5,9 min 15,8 max 3,0 max not tinned 3,0 13,5 min 1,3 max 1 2 3 (2x) 0,9 max (3x) 2,54 2,54 0,6 2,4 Fig.19. SOT78 (TO220AB); pin 2 connected to mounting base. Notes 1. Observe the general handling precautions for electrostatic-discharge sensitive devices (ESDs) to prevent damage to MOS gate oxide. 2. Refer to mounting instructions for SOT78 (TO220) envelopes. 3. Epoxy meets UL94 V0 at 1/8". August 1999 7 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Logic level FET BUK9505-30A DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 1999 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. August 1999 8 Rev 1.100