TECHNISCHE SKIZZE / Technical sketch BAUTEILE / FERTIGUNGSHINWEISE Piece parts / Manufacturing notices Kabelaufdruck (Bsp.) - Kabelaufdruck mittels Tintenstrahldrucker entspr. Techn. Skizze Cable imprint (e.g.) Kennzeichnungsträger ERNI Art.-Nr. 15 0,6 Part No. ERNI XXXXXX PUR 2x0.34 2x0,25 422006 See table A 46,5 1,83 Good chemical and oil resistance (parts with PVC-cable are not restistant). When using agressive media, material resistance based on application must be checked. 15 0,59 label holder Cable imprint with ink-jet printer see technical sketch - Gute Chemikalien- und Ölbeständigkeit (Ölbeständigkeit gilt nicht für den Einsatz mit PVC-Kabel). Beim Einsatz aggressiver Medien ist die Materialbeständigkeit applikationsbezogen zu überprüfen. Production date e.g.: KW42 2006 43,5 1,71 STROMLAUFPLAN / Schematic diagram Ansicht: Steckgesicht; Kontaktbelegung / 4 5 4 View: mating face; pin assignment 2 3 Stand ard ap p l i c. Pin assignment: Coding: Connection: LED: Packaging: Mate ri al s & Fi ni sh Contact material: a) male b) female Contact finish, mating zone: a) male b) female Screw material: Screw plating: Val ue M12 male, straight, black M12 female, straight, black 5 pin A-coding Screw locking M12x1mm (0,6 Nm) 1 piece per bag El e ctri cal Data Rated (nominal) voltage; max. Rated current; per contact, max. Rated impulse voltage Stand ard ap p l i c . IEC 61-076-2-101 IEC 61-076-2-101 IEC 61-076-2-101 A p p ro v al s Protection class (mated and locked) IEC 60529 Pollution degree Insulation category IEC 60664-1 RoHS compliant Standard description CuZn39Pb3F50 Standard description CuNi2Si HV160U Thickness of plating Thickness of plating Standard description Standard description Leitungslänge (A) 0,5 µm Au over 2 µmNi 0,8 µm Au (partial) Zinc pressure die casting Ni 4-6 µm Cab l e (ad d i ti o nal i nfo se e tab l e ) Jacket color violett Conductor cross-section Bending radius min. 2 x 0,25 mm² + 2 x 0,34 mm 15 x jacket diameter 2 Val ue 60 V AC/DC 4A 1,5 kV 354195 364415 225120 225117 225119 225118 300 +30 mm [11.81 +1,2 in] 600 +50 mm [23.62 +2,4 in] 1.000 +50 mm [39.37 +4 in] 1.500 +100 mm [59.05 +4 in] 2.000 +100 mm [78,74 +4 in] 5.000 ± 1,5% [196,85 ± 1,5%] 7.500 ± 1,5% [295,28 ± 1,5%] 10.000 ± 1,5% [393,70 ± 1,5%] IP67 3 I Yes Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. T e ch ni c al Sp e ci fi cati o ns Housing: flexible conductor black (V-) Cable length (A) wires 2,3 and 4,5 twisted pair KupferKabelmantel Außendurchmesser Aderisolation gewicht Copper weight 34 g 49 g 65 g 158 g g 235 g 312 g Jacket material Jacket diameter Wire isolation 6,9 mm 5% [0.185 in 5%] PE PUR, shielded (UL/CSA) Tolerances Information: 1 flexible conductor white(CAN_H) Litze hellblau (CAN_L) flexible conductor light blue (CAN_L) Artikel-Nr. Part No. flexible conductor red (V+) Litze weiss (CAN_H) 5 SPECIFICATIONS Circular Connector Litze rot (V+) Litze schwarz (V-) 4 3 3 tracer 0,34² 5 2 2 1 1 Beilaufdraht 0,25² 1 2 3 4 5 Zul. Temp.-Bereich für Kabel Permissable temp. for cable -25... +80 °C (fixed installed) -20... +80 °C (mounted flexible) 1:1 Scale All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. CCCS M12, 5pin / M12, 5pin A-coding 354196 www.ERNI.com d 30.08.2010 Index Date Class CCCS (1/1) A3