RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) 0,10 0,004 MAX 16,24 0,639 MIN. 3,18 0,125 DETAIL A MAßSTAB 5 : 1 1,27 x 7 = (8,89 0,350 ) TOP OF PCB LP 0,76 0,030 8 14,47 0,570 0,1 1 8 3,30 0,130 x2 1,60 0,063 x2 2,97 0,117 1 2,16 0,085 0,20 ±0,10 0,008 ±0,004 0,10 0,004 0,35 ±0,10 0,014 ±0,004 18,67 0,735 2,50 0,098 15,74 0,620 12,25 0,482 MIN. 1,27 0,050 11,43 0,450 15,54 0,612 A 1,00 0,039 2,97 0,117 8,13 0,320 11,75 0,463 2,50 0,098 11,43 0,450 IMPROVED CONTACT DESIGN (PRE BEND) NOTE 1: WITH PEGS, GRAUNDING PINS AND SMT TERMINALS NOTE 2: RoHS COMPLIANT Technical specifications St andard applic. Standard description Standard description Thickness of plating Thickness of plating Standard description Asse mbly pro cess Packaging Solder temperature Suitable assembly process Appro vals UL insulation body UL File No. RoHS compliant Value PA46 CuSn5 30 µin Au over 50 µin Ni Flash Au over 50 µin Ni C2680 (acc. JIS) 50 µin Ni / 80 µin Sn Tray 235°C at 3-5s wave UL 94 V0 E145613 Yes T e st Data Standard applic. Me chanical pro pe rtie s Insertion/withdrawal force IEC 603-7 max. Mechanical operations IEC 512-5, 9a min. Effectiveness of connector coupling device IEC 512-8, 15f Electrical prope rt ie s Cre e page / cle arance distance s a) Contact - contact IEC 807-3 b) Contact - shell IEC 807-3 Vo ltage pro o f (Die le ctric Withst and Vo ltage ) a) Contact - contact IEC 512-2, 4a min. b) Contact - shell/testpanel IEC 512-2, 4a min. Current carrying capacity IEC 512-3, 5b Contact resistance IEC 512-2, 2a max. Insulation resistance IEC 512-2, 3a min. Enviro nme ntal pro pe rtie s Operation temperature Value PART NO. IDENT. NR. 20 N 1.000 203495 50 N 0,52 mm min. 1,0 mm 1.000 V AC/DC 1.500 V AC/DC 1,5 A @ 25° C 30 mOhm 500 MOhm 0 - 70° C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. Mate rials & Finish Insulation body Contact material Contact finish, mating zone Contact finish termination zone Shell/shield material Plating shield / shielding pin PACKAGING VERPACKUNG TAPE & REEL (SEE PAGE 2 of 2) 130 PIECES PER REEL Tolerances Information: 2:1 Scale All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJLS 8P8C, 1X1, SMT, CAT 3/4 203496 www.ERNI.com b 07.05.2015 Index Date Class MJ I (1/2) A3 TAPE AND REEL INFORMATION 120 CONNECTORS PER REEL Section B-B 1 2,00 0,079 4,00 0,157 A RO 6 R0 12,40 0,488 15,90 0,626 16,10 0,634 1,35 0,053 4 1,35 0,053 ROLL DIRECTION 0,05 12,40 0,488 28,00 1,102 ,30 0,0 12 Detail "A" M 5:1 0,20 0,008 "A" 5,00 0,197 A R0 LL 13,00 0,512 44,00 1,732 B 0,3 20,20 0,795 R0 ,3 0 B 330 DI RE 1:1 CT IO N 203495 TAPE & REEL PACKAGE (T YP ) , 75 0, 0 30 NOTE 1: 10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE ±0.2 NOTE 2: CAMBER NOT TO EXCEED 1 mm IN 100 mm NOTE 3: MATERIAL: CLEAR ADVANTEK POLYSTYRENE NOTE 4: MEASURED ON A PLANE 0,3 MM ABOVE THE BOTTOM OF THE POCKET NOTE 5: MEASURED FROM A PLANE ON THE INSIDE BOTTOM OF THE POCKET TO THE TOP SURFACE OF THE CARRIER NOTE 6: POKET POSITION RELATIVE TO SPROCKET HOLE MEASURED AS TRUE POSITION OF POCKET; NOT POCKET HOLE Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 5 ROLL DIRECTION 0,15 1,75 0,069 6 0,0 12 m 1, 5 0 +0 ,1 0,05 ax . 0,40 0,016 0, 0 59 +0 ,1 Section A-A 50,00 1,969 Tolerances Information: 2:1 Scale All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJLS 8P8C, 1X1, SMT, CAT 3/4 203496 www.ERNI.com b 07.05.2015 Index Date Class MJ I (2/2) A3