RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) TOL. 0.05 [0.002] UNLESS NOTED RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN-AUSSCHNITT 3,18 0,125 12,29 0,484 7 x 1,27 = (8,89 0,350 ) TOP OF PCB LP 0,76 0,030 15,74 0,620 2,54 0,100 1 8 18,67 0,735 11,75 0,463 1 3,05 0,120 11,47 0,452 1,27 0,050 3,30 ±0,07 0,130 ±0,003 X2 0,10 0,004 MAX 16,66 0,656 8 3,12 0,123 11,43 0,450 11,43 ±0,13 0,450 ±0,005 2,50 +0,30 0,00 0,098 18,50 ±0,25 0,728 ±0,010 2,50 0,098 16,35 0,644 +0,012 0,000 8,13 0,320 NOTE 1: WITH PEGS, SMT SIDE SHIELD TABS AND SMT TERMINALS (STP) NOTE 2: C - UL APPROVED E145613 AND MEETS FCC REQUIREMENTS NOTE 3: RoHS COMPLIANT PACKAGING VERPACKUNG PART NO. IDENT. NR. 133611 203422 Technical specifications St and ard applic . Value T e st Dat a St andard applic . Value Insulation body Standard description PA46 30% Contact material Standard description CuSn5 (acc.JIS) Insertion/withdrawIEC 603-7 max. 20 N Contact finish, mating zone Thickness of plating M e chanic al pro pe rt ie s 30 µin Au over 50 µin Ni Mechanical operatiIEC 512-5, 9a min. 1000 Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni Shell/shield material Standard description C2680 (acc. JIS) Effectiveness of connector coupling device IEC 512-8, 15f 50 N Plating shield / shielding pin 50 µin Ni / 80 µin Sn Ele c t rical pro pe rt ie s Cre e page / c le aranc e dist ance s Asse mbly pro c e ss a) Contact - contac IEC 807-3 0,52 mm see chart b) Contact - shell IEC 807-3 min. 1,0 mm Solder temperature 260°C at 3-5s Vo lt age pro o f ( Die le c t ric Wit hst and Vo lt age ) Suitable assembly process reflow a) Contact - contac IEC 512-2, 4a Packaging b) Contact - shell/teIEC 512-2, 4a Appro v als Current carrying caIEC 512-3, 5b UL insulation body UL 94 V0 UL File No. E145613 RoHS compliant Yes min. 1.000 V AC/DC min. 1.500 V AC/DC 1,5 A @ 25° C Contact resistance IEC 512-2, 2a max. 30 mOhm Insulation resistancIEC 512-2, 3a min. 500 MOhm Enviro nme nt al pro pe rt ie s Operation temperature -40° C - + 85°C Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. Mat e rials & Finish IMPROVED CONTACT DESIGN (PRE BEND) TRAY (Standard) (SEE PAGE 2 of 2) TAPE & REEL (SEE PAGE 2 of 2) 120 PIECES PER REEL Scale Tolerances Information: 2:1 All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJLS 8P8C, 1X1, SMT 203499 www.ERNI.com b 20.08.2015 Index Date Class MJ I (1/2) A3 0,05 TAPE AND REEL INFORMATION VERPACKT IN GURTVERPACKUNG 120 CONNECTORS PER REEL 53,00 B B 14,00 329,00 0,3 A 44,00 1,732 4,00 0,157 0,15 111 2,00 0,079 20,20 0,795 1,75 0,069 +0 ,1 111 1, 5 0 0,05 0, 0 59 +0 ,1 Section A-A 0,40 0,016 Section B-B R0 , 75 0,20 0,008 Detail "A" 203422 TAPE & REEL PACKAGE NOTE 1: 10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE ±0.2 "A" 5,00 0,197 28,00 1,102 A NOTE 2: CAMBER NOT TO EXCEED 1 mm IN 100 mm NOTE 3: MATERIAL: CLEAR ADVANTEK POLYSTYRENE 12,40 0,488 12,40 0,488 NOTE 4: MEASURED FROM A PLANE ON THE INSIDE BOTTOM OF THE POCKET TO THE TOP SURFACE OF THE CARRIER 15,90 0,626 16,10 0,634 NOTE 5: POCKET POSITION RELATIVE TO SPROCKET HOLE MEASURED AS TRUE POSITION OF POCKET, NOT POCKET HOLE 1,35 0,053 1,35 0,053 133611 TRAY PACKAGE Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 1:1 Scale Tolerances Information: 2:1 All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJLS 8P8C, 1X1, SMT 203499 www.ERNI.com b 20.08.2015 Index Date Class MJ I (2/2) A3