Quick Start Guide for the KIT33816FRDMEVM Rev. 2.0 N o v. 1 3 . 2 0 1 4 TM External Use Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. © 2014 Freescale Semiconductor, Inc. Agenda • Getting to Know the KIT33816FRDMEVM • Getting Started Out of the Box • MC33816 Development tools • Explore Further TM External Use 1 Getting to Know the KIT33816FRDMEVM VBAT USB TM External Use 2 Getting to Know the KIT33816FRDMEVM • • • • • MC33816 direct injection pre-driver integrated circuit USB-to-SPI dongle interface using the FRDM-KL25Z External MOSFETs controlling 4 injectors and 2 fuel pumps Power-conditioning circuitry +12 V VSUPP provides the power to the MC33816 and the loads TM External Use 3 Getting Started Out of the Box • Installing and Running the Out of the Box Demo 1 2 Download and Install SPIGEN 7.x from http://www.freescale.com/SPIGEN Plug in a USB cable from a USB host to the KL25Z_USB. The FRDM-KL25Z will be powered by this USB connection. 3 Run SPIGEN 7.1 (or latest). LED on KL25Z turns blue 4 Connect 14 V / 2.0 A power supply to VBAT connector 5 Download and unzip KIT33816-SPIGEN.spi and KIT33816FRDM-SBCH.zip KL25Z_USB TM External Use 4 Getting Started Out of the Box • Program MC33816 with SPIGEN 7.x 1 Click on Open and load the configuration file KIT33816AESW_Rev2.0.spi 2 Select Micro Code from left tab 3 Set RSTB and DRVEN to High 4 Click on Load Filenames and select the SPIGen33816Files.txt file from the KIT33816SW 5 1 7 Click on Download All, a pop up Download complete window appears. 2 6 5 3 4 6 Click on Enable Flash on CH1 and CH2 7 Go to tab “Batch Command” and send Startx High and Low control signal to turn the injectors On/Off TM External Use 5 MC33816 Development Tools KIT33816FRDMEVM .bin Files MC33816 IDE USB SPI SPIGEN • Edit and compile source code KL25Z MC33816 • Create register configurations • Generate C files arrays* •SPI software to control MC33816 OR •Download all configuration, DRAM, CRAM .bin Files PSC Simulator • • • • • 4 cylinders + Fuel Pump control DCDC control USB/SPI interface (KL25Z) 1MHz CLK Pi Filter •Generate Start file command • Edit, compile, and debug source code •Supports single step code execution, breakpoints without the need for hardware •Provides graphical output of digital and analog (load) waveforms * Dedicated for MCU coding TM External Use 6 Explore Further Now that you are familiar with the KIT33816FRDMEVM and SPIGEN, it’s time to explore the additional software and user guide available on www.freescale.com . Select your next path from the links in the Jump Start Your Design section. TM External Use 7 Revision History Revision Date Description of Changes 1.0 10/2014 • Initial release 2.0 11/2014 • Updated the filename in step 5 on page 4 TM External Use 8 TM www.Freescale.com © 2014 Freescale Semiconductor, Inc. | External Use