440 440-071 EMI/RFI Dual Banding Adapter Direct Coupling - Standard Profile 440 F S 071 NF 16 12-8 K P CONNECTOR DESIGNATORS * A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 4 Product Series Polysulfide (Omit for none) Connector Designator B = 2 Bands K = 2 Precoiled Bands (Omit for none) Angle and Profile H = 45 J = 90 S = Straight Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Basic Part No. DIRECT COUPLING Cable Entry (Table V) Finish (Table II) Shell Size (Table I) Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 3) A Thread (Table I) * Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 3) Length * B (Table I) K* M* L* * (Table V) STYLE 2 (STRAIGHT See Note 1) .060 (1.5) Typ. .380 (9.7) Typ. J E J (Table III) (Table III) (Table IV) B (Table I) F (Table IV) G (Table IV) B (Table I) H (Table IV) Termination Areas Free of Cadmium. Knurl or Ridges Mfr's Option Band Option (K Option Shown See Note 5) Polysulfide Stripes P Option © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 440 - Page 34 www.glenair.com 440 440-071 EMI/RFI Dual Banding Adapter Direct Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 Dash No. 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 20 22 24 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE IV: ELBOW DIMENSIONS Elbow E F G Size Max Max Max 02 .639 (16.2) 1.328 (33.7) .750 (19.1) 03 .639 (16.2) 1.328 (33.7) .750 (19.1) 04 .639 (16.2) 1.328 (33.7) .750 (19.1) 05 .664 (16.9) 1.358 (34.5) .810 (20.6) 06 .664 (16.9) 1.358 (34.5) .810 (20.6) 07 .688 (17.5) 1.378 (35.0) .870 (22.1) 08 .688 (17.5) 1.378 (35.0) .870 (22.1) 09 .705 (17.9) 1.408 (35.8) .920 (23.4) 10 .732 (18.6) 1.428 (36.3) .980 (24.9) 11 .732 (18.6) 1.428 (36.3) .980 (24.9) 12 .748 (19.0) 1.438 (36.5) 1.020 (25.9) 13 .773 (19.6) 1.458 (37.0) 1.080 (27.4) 14 .773 (19.6) 1.458 (37.0) 1.080 (27.4) 15 .800 (20.3) 1.498 (38.0) 1.140 (29.0) 16 .800 (20.3) 1.498 (38.0) 1.140 (29.0) TABLE V: CABLE ENTRY M K L Dia Dia Dia .312 (7.9) .125 (3.2) .250 (6.4) .375 (9.5) .188 (4.8) .312 (7.9) .438 (11.1) .250 (6.4) .375 (9.5) .500 (12.7) .312 (7.9) .438 (11.1) .562 (14.3) .375 (9.5) .500 (12.7) .625 (15.9) .438 (11.1) .562 (14.3) .688 (17.5) .500 (12.7) .625 (15.9) .750 (19.1) .562 (14.3) .688 (17.5) .812 (20.6) .625 (15.9) .750 (19.1) .875 (22.2) .688 (17.5) .812 (20.6) .938 (23.8) .750 (19.1) .875 (22.2) .812 (20.6) .938 (23.8) 1.000 (25.4) .875 (22.2) 1.000 (25.4) 1.062 (27.0) .938 (23.8) 1.062 (27.0) 1.125 (28.6) 1.000 (25.4) 1.125 (28.6) 1.188 (30.2) 1.062 (27.0) 1.188 (30.2) 1.250 (31.8) 1.125 (28.6) 1.250 (31.8) 1.312 (33.3) 1.250 (31.8) 1.375 (34.9) 1.438 (36.5) 1.375 (34.9) 1.500 (38.1) 1.562 (39.7) 1.500 (38.1) 1.625 (41.3) 1.688 (42.9) © 2005 Glenair, Inc. H Max 1.438 (36.5) 1.438 (36.5) 1.438 (36.5) 1.498 (38.0) 1.498 (38.0) 1.558 (39.6) 1.558 (39.6) 1.628 (41.4) 1.688 (42.9) 1.688 (42.9) 1.708 (43.4) 1.768 (44.9) 1.768 (44.9) 1.848 (46.9) 1.848 (46.9) 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Consult factory for shorter lengths on straight backshells. 4. When using Connector Designator B refer to pages 18 and 19 for part number development. 5. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 440 - Page 35 www.glenair.com