Series 72 Convoluted Tubing 121-014 Type E Series 72 Annular Convoluted Tubing Thermally Stabilized Kynar® 121-014-16 Product Series TYPE E Dash No. (Table I) TWO EXTERNAL TIN/COPPER BRAIDS Basic No. INNER SHIELD OUTER SHIELD B DIA A DIA LENGTH (AS SPECIFIED IN FEET) MINIMUM BEND RADIUS TABLE I DASH A DIA B DIA MINIMUM NO. MIN MAX MIN MAX BEND RADIUS * 09 .24 (6.1) .28 (7.1) .46 (11.7) .50 (12.7) .75 (19.1) 12 .33 (8.4) .37 (9.4) .56 (14.2) .60 (15.2) 1.00 (25.4) 16 .45 (11.4) .50 (12.7) .68 (17.3) .74 (18.8) 1.38 (35.1) 20 .57 (14.5) .62 (15.7) .79 (20.1) .85 (21.6) 1.69 (42.9) 24 .69 (17.5) .75 (19.1) .96 (24.4) 1.02 (25.9) 1.88 (47.8) 28 .81 (20.6) .87 (22.1) 1.08 (27.4) 1.16 (29.5) 2.00 (50.8) 2.38 (60.5) 32 .93 (23.6) 1.00 (25.4) 1.20 (30.5) 1.28 (32.5) 2.88 (73.2) 40 1.18 (30.0) 1.25 (31.8) 1.44 (36.6) 1.52 (38.6) * The minimum bend radius is based on Type A construction (see page E-3). For multiple-braided coverings, these minimum bend radii may be increased slightly. Metric dimensions (mm) are in parentheses. Note: Tubing supplied in random lengths. For specific size lengths, consult factory. © 2003 Glenair, Inc. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] E-7