440 440-070 EMI/RFI Dual Banding Adapter Rotatable Coupling - Split Shell 440 A D 070 NF 16 12 K P CONNECTOR DESIGNATORS A-F-H-L-S ROTATABLE COUPLING Product Series Polysulfide (Omit for none) Connector Designator B = 2 Bands K = 2 Precoiled Bands (Omit for none) Angle and Profile C = Ultra-Low Split 90 D = Split 90 F = Split 45 Dash No. (Table IV) Shell Size (Table I) Basic Part No. Finish (Table II) A Thread (Table I) D (Table III) C Typ. (Table I) F (Table III) E (Table III) Split 45° Termination Areas Free of Cadmium. Knurl or Ridges Mfr's Option Split 90° G (Table III) .380 (9.7) Typ. L* M* .060 (1.5) Typ. N* K (Table III) * (Table IV) H (Table III) Polysulfide Stripes P Option .88 (22.4) Max Band Option (K Option Shown See Note 3) STYLE 2 (See Note 1) © 2005 Glenair, Inc. CAGE Code 06324 Max Wire Bundle (Table III, Note 1) J (Table III) Ultra LowProfile Split 90° Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 440 - Page 32 www.glenair.com 440 440-070 EMI/RFI Dual Banding Adapter Rotatable Coupling - Split Shell See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 D Max .440 (11.2) .500 (12.7) .560 (14.2) .620 (15.7) .680 (17.3) .750 (19.1) .820 (20.8) .880 (22.4) .940 (23.9) Dash No. 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 20 22 24 E Max 1.940 (49.3) 2.000 (50.8) 2.070 (52.6) 2.100 (53.3) 2.200 (55.9) 2.260 (57.4) 2.320 (58.9) 2.380 (60.5) 2.440 (62.0) F Max .680 (17.3) .750 (19.1) .810 (20.6) .870 (22.1) .930 (23.6) 1.000 (25.4) 1.060 (26.9) 1.120 (28.4) 1.180 (30.0) G Max 1.880 (47.8) 1.940 (49.3) 2.010 (51.1) 2.040 (51.8) 2.140 (54.4) 2.200 (55.9) 2.260 (57.4) 2.320 (58.9) 2.380 (60.5) TABLE IV: CABLE ENTRY N L M Dia Dia Dia .312 (7.9) .125 (3.2) .250 (6.4) .375 (9.5) .188 (4.8) .312 (7.9) .438 (11.1) .250 (6.4) .375 (9.5) .500 (12.7) .312 (7.9) .438 (11.1) .562 (14.3) .375 (9.5) .500 (12.7) .625 (15.9) .438 (11.1) .562 (14.3) .688 (17.5) .500 (12.7) .625 (15.9) .750 (19.1) .562 (14.3) .688 (17.5) .812 (20.6) .625 (15.9) .750 (19.1) .875 (22.2) .688 (17.5) .812 (20.6) .938 (23.8) .750 (19.1) .875 (22.2) .812 (20.6) .938 (23.8) 1.000 (25.4) .875 (22.2) 1.000 (25.4) 1.062 (27.0) .938 (23.8) 1.062 (27.0) 1.125 (28.6) 1.000 (25.4) 1.125 (28.6) 1.188 (30.2) 1.062 (27.0) 1.188 (30.2) 1.250 (31.8) 1.125 (28.6) 1.250 (31.8) 1.312 (33.3) 1.250 (31.8) 1.375 (34.9) 1.438 (36.5) 1.375 (34.9) 1.500 (38.1) 1.562 (39.7) 1.500 (38.1) 1.625 (41.3) 1.688 (42.9) © 2005 Glenair, Inc. H Ref .340 (8.6) .270 (6.9) .270 (6.9) .280 (7.1) .420 (10.7) .640 (16.3) .640 (16.3) .540 (13.7) .540 (13.7) J Max 2.220 (56.4) 2.380 (60.5) 2.380 (60.5) 2.450 (62.2) 2.500 (63.5) 2.530 (64.3) 2.530 (64.3) 2.680 (68.1) 2.680 (68.1) K Function C Max Max Wire Bundle .681 (17.3) .250 (6.4) .731 (18.6) .375 (9.5) .731 (18.6) .375 (9.5) .831 (21.1) .500 (12.7) .981 (24.9) .625 (15.9) 1.181 (30.0) .625 (15.9) 1.181 (30.0) .625 (15.9) 1.181 (30.0) .750 (19.1) 1.181 (30.0) .750 (19.1) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied (not available on Function C). Dimensions D, E, F and G will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. 4. Angular function "C", low-profile split elbow, not available with "S" connector designator. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 440 - Page 33 www.glenair.com