400-001 TAG Ring Backshell 40 ® with Strain Relief Rotatable Coupling - Split Shell 400 F D 001 M 16 06 L CONNECTOR DESIGNATORS A-F-H-L-S Product Series Strain Relief Style (F, G, L) Connector Designator Cable Entry (Table IV, V) Shell Size (Table I) ROTATABLE COUPLING Angle and Profile C = Ultra-Low Split 90° D = Split 90° F = Split 45° Finish (Table II) Basic Part No. F (Table III) H (Table III) A Thread (Table I) K (Table III) D (Table III) G (Table III) E (Table III) C Typ. (Table I) Max Wire Bundle (Table III, Note 1) Ground Spring Split 45° Cable Entry L (Table IV) .88 (22.4) Max J (Table III) M (Table V) Split 90° Ultra LowProfile Split 90° STYLE 2 (See Note 1) STYLE F Light Duty (Table V) .416 (10.5) Approx. Cable Range © 2005 Glenair, Inc. M STYLE G Light Duty (Table IV) STYLE L Light Duty (Table V) .072 (1.8) Approx. Cable Entry CAGE Code 06324 L .850 (21.6) Approx. Cable Range M Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 40 - Page 8 400-001 TAG Ring Backshell 40 ® with Strain Relief Rotatable Coupling - Split Shell See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: DIMENSIONS Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 D Max .440 (11.2) .500 (12.7) .560 (14.2) .620 (15.7) .680 (17.3) .750 (19.1) .820 (20.8) .880 (22.4) .940 (23.9) Dash No. 02 03 04 05 06 07 08 09 10 E Max 1.500 (38.1) 1.560 (39.6) 1.630 (41.4) 1.660 (42.2) 1.760 (44.7) 1.820 (46.2) 1.880 (47.8) 1.940 (49.3) 2.000 (50.8) F Max .680 (17.3) .750 (19.1) .810 (20.6) .870 (22.1) .930 (23.6) 1.000 (25.4) 1.060 (26.9) 1.120 (28.4) 1.180 (30.0) TABLE IV: CABLE ENTRY L Cable Entry Max Max .545 (13.8) .250 (6.4) .670 (17.0) .375 (9.5) .795 (20.2) .500 (12.7) .920 (23.4) .625 (15.9) 1.045 (26.5) .750 (19.1) 1.170 (29.7) .875 (22.2) 1.295 (32.9) 1.000 (25.4) 1.420 (36.1) 1.125 (28.6) 1.670 (42.4) 1.250 (31.8) G Max 1.440 (36.6) 1.500 (38.1) 1.570 (39.9) 1.600 (40.6) 1.700 (43.2) 1.760 (44.7) 1.820 (46.2) 1.880 (47.8) 1.940 (49.3) Dash No. 02 03 04 05 06 07 08 09 10 H Ref .340 (8.6) .270 (6.9) .270 (6.9) .280 (7.1) .420 (10.7) .640 (16.3) .640 (16.3) .540 (13.7) .540 (13.7) J Max 2.060 (52.3) 2.220 (56.4) 2.220 (56.4) 2.290 (58.2) 2.340 (59.4) 2.370 (60.2) 2.370 (60.2) 2.520 (64.0) 2.520 (64.0) K Function C Max Max Wire Bundle .681 (17.3) .250 (6.4) .731 (18.6) .375 (9.5) .731 (18.6) .375 (9.5) .831 (21.1) .500 (12.7) .981 (24.9) .625 (15.9) 1.181 (30.0) .625 (15.9) 1.181 (30.0) .625 (15.9) 1.181 (30.0) .750 (19.1) 1.181 (30.0) .750 (19.1) TABLE V: CABLE ENTRY M Cable Max Min .968 (24.6) .125 (3.2) 1.046 (26.6) .250 (6.4) 1.156 (29.4) .250 (6.4) 1.218 (30.9) .375 (9.5) 1.343 (34.1) .500 (12.7) 1.468 (37.3) .625 (15.9) 1.593 (40.5) .625 (15.9) 1.718 (43.6) .750 (19.1) 1.843 (46.8) .875 (22.2) Range Max .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied (not available in Function C). Dimensions D, E, F and G will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Angular function "C", low-profile split elbow, not available with "S" connector designator. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 40 - Page 9