IPT SE Series Bayonet Lock Connectors IPT 07 SE Rear Panel Mount Jam Nut Receptacle Connector with Backshell IPT 07 SE 18-11 S Z XX MIL-C-26482 Series l Type Mod Code Options See Table II 07 - Rear Panel Mount Jam Nut Receptacle Alternate Insert Rotation (W, X, Y, Z) Omit for Normal Connector Class SE - Crimp Contact/Environmental Contact Gender P - Pin S - Socket Shell Size and Insert Arrangements L1 L2 D1 B2 L4 D3 D2 S L3 3.6 Max. B1 APPLICATION NOTES 1. Rear panel mount jam nut receptacle connector with simple backshell for open wire bundles. 2. Connector Class “SE” (crimp contact/environmental)––Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber. © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-18 www.glenair.com IPT SE Series Bayonet Lock Connectors IPT 07 SE Rear Panel Mount Jam Nut Receptacle Connector with Backshell TABLE I: DIMENSIONS Shell size B2 +0 - 0.25 B1 Max. D2 Min. D1 D3 +0 - 0.8 L1 Max. L2 + 0.8 -0 L3 Min. L4 ± 0.5 S ± 0.43 Maximum Weight in Grams 8 24.3 13.46 0.5625 - 24 UNEF 19.0 27.3 39.3 17.5 9.75 3.0 19.05 20 10 27.4 16.64 0.6875 - 24 UNEF 22.2 30.5 39.3 17.5 9.75 3.0 22.23 21 12 32.2 20.78 0.8750 - 20 UNEF 25.4 35.3 39.3 17.5 9.75 3.0 26.97 30 14 35.4 23.93 1.0000 - 20 UNEF 28.5 38.5 39.3 17.5 9.75 3.0 30.18 39 16 38.6 27.08 1.1250 - 18 UNEF 31.7 41.6 39.3 17.5 9.75 3.0 33.32 49 18 41.7 30.25 1.2500 - 18 UNEF 34.9 44.8 39.3 17.5 9.75 3.0 36.53 57 20 46.5 33.43 1.3750 - 18 UNEF 38.8 49.6 43.4 22.3 11.32 3.8 39.67 78 22 49.7 36.60 1.5000 - 18 UNEF 42.0 52.7 43.4 22.3 11.32 3.8 42.88 97 24 52.8 39.78 1.6250 - 18 UNEF 45.2 55.9 43.4 23.1 12.16 3.8 46.02 115 TABLE II: MODIFICATION CODES Shell Finish (Omit for Standard Cad/Olive Drab Finish) Assembly with Accessories (Omit for Standard Version) F2 - Bright Nickel Plating (RoHs) Key Polarization (Omit for N version) W, X, Y, Z = Alternates F6 - Black Electrodeposited Paint (RoHs) N0 - Connector Less Backshell F7 - Black Zn-Co Plating (RoHs) GXXX - Custom Designed Connector F8 - Olive Drab Zn-Co Plating STANDARD FINISHES (For QQ-A-591 Aluminum Shells) Requirements IAW RoHS Not IAW RoHS F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive G3 Cadmium with Olive F8 Zinc Cobalt with Drab Passivation Olive Drab Passivation Thermal Shock Salt Spray After Thermal Shock Electical Conductivity -40°C + 100°C -55°C + 125°C -55°C + 125°C -55°C + 125°C -40°C + 100°C 24 hour 500 hour 500 hour 500 hour 200 hour Very Good NO Very Good Very Good Good Abrasion Resistance Very Good Very Good Good Very Good Good © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-19 www.glenair.com