VG95328 Qualified Bayonet-Lock Connectors

VG95328 Qualified
Bayonet-Lock Connectors
High-Density MIL-C-26482 Type Connectors—VG95328
Qualified for Rugged Military and Industrial Applications
United States

United Kingdom

Germany

France

Nordic

Italy

Spain

Japan
Now Arriving on Track 5015!
Glenair Series ITS
Reverse Bayonet Connectors
Series ITS M
IL
Reverse Bayo -DTL-5015 Type
net Connecto
Over 200 Pow
rs
er and Si
gnal Insert Ar
PLUS: Connec
rangements
tor Accessorie
s and Assem
bly Tools
United S
tates
�
United K
ingdom
�
Germany
�
France
�
Nordic
�
Italy
�
Spain
�
Japan
EU Sales: Glenair Connectors Italia, S.r.L. Tel: +39-02-91082121 Email: [email protected]
North American Sales: Glenair Connecticut, Tel: 203-741-1115 Email: [email protected]
Factory Support: Commital S.p.a. (Italy) Tel: +39-51-7821811 Email: [email protected]
U n i t e d S t a t e s · United Kingdom · Germany · N o r d i c · France · I t a l y · Spain
www.glenair.com
A World of Interconnect Solutions
VG95328
Introduction
VG95328
High Performance Crimp Contact
Bayonet-Lock Signal Connectors (MIL-C-26482 Type)
Qualified VG95328 Connector and Backshell Products for
High Performance Military and Industrial Applications
Harsh Application Environments
applications such as in machine tools and
factory automation. Supplied crimp contacts
are gold-plated copper alloy. Inserts are made
from high-insulation synthetic rubber, oil and
temperature resistant to -55° C to +125° C.
The Glenair Series VG95328 BayonetLock Signal Connector is ideally suited for
all general and environmental applications
that require a high-performance military type
cylindrical connector with crimp-removable
contacts. Qualified to VG95328, the bayonet
mechanism provides fast and easy coupling,
especially when the connector is situated in an
awkward or hard to reach location.
Intermateability
The Series VG95328 Connector is
interchangeable and intermateable with the
wide range of industry-standard bayonet
connectors designed around MIL-C-26482
and/or qualified to VG 95328.
Environmental protection to IP67 levels
provides additional reliability and the flexibility
to specify these rugged connectors in harsh
© 2010 Glenair, Inc.
•
High Performance Crimp Version with Contact Retention
Clips and Sealed Inserts
•
Environmental and Hermetic Versions
•
2 Contact Sizes: #20 and #16.
•
Closed Entry Socket Contacts
•
18 Signal Contact Insert Arrangements, 3 to 61
Contacts
•
Rear-Insertion/Front Release Snap-In Contacts
•
Intermateable with Other MIL-C-26482 Products
•
Ruggedized Contact Retention Clip
•
Environmentally Sealed System
•
Audible and Visual Coupling Indicators
•
Keyed Polarization
•
Optional Grounding Fingers on Plugs
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 1
E-Mail: [email protected]
VG95328
Introduction
VG95328
High Performance Crimp Contact
Bayonet-Lock Signal Connectors (MIL-C-26482 Type)
VG95328
Glenair’s qualified VG95328 miniature bayonet-lock connector series is based on the MIL-C-26482
Series I standard, and shares the same insert arrangements, shell dimensions, supported contacts and
electrical performance ratings as MIL-C-26482 and Glenair’s commercial equivalent product line, the
IPT SE. The VG 95328 3-point bayonet coupling mechanism provides easy mating and positive locking
resistance to vibration, shock, and other connector de-coupling forces in general duty and environmental
interconnect systems such as military and commercial aircraft, medical equipment, industrial controls,
factory robotics, intrumentation and other general electronic applications.
Component Materials
VG95328 connectors are available in aluminum alloy and are supplied standard with an olive green
cadmium finish IAW QQ-P-416. Supplied crimp contacts are gold plated copper alloy. Insulators are
High Insulation Synthetic Rubber (Chloroprene): -55°C/+125°C.
EMI and Environmental
Applications
VG95328 Series connectors are
perfectly suited for use in rugged
applications where EEC compliance
directives for electromagnetical
compatibility is required. A complete
range of EMI shield termination
accessories are available for both
overall as well as individual wire
shields.
Equipped with the appropriate
backshells and environmental sealing,
the connectors are submersible for 48
hours up to a depth of two meters.
Connector Accessories
Many of the VG95328 Series connectors come standard already paired with selected backshell
accessories for most application requirements. See the accessory descriptions on the opposite page for
more information. A full range of additional connector accessories including dustcaps and EMI gaskets
are also available.
Please contact the factory for additional information or any of our worldwide sales and engineering
facilities. Glenair’s website, www.glenair.com also has complete information on these products, as well
as other ruggedized power and signal connectors.
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 2
E-Mail: [email protected]
VG95328
Introduction
VG95328 Bayonet-Lock
High Performance Crimp Contact (MIL-C-26482 Type)
Styles and Classes
VG95328 offers a simplified ordering and part number format that combines the five standard connector shell
styles with the most popular backshells and connector accessories. Available connector shell styles, backshell
types and accessories include:
VG95328 Connector Shell Styles
•
Front Panel Mount Square Flange Receptacle with Accessory Threads
•
Rear Box Mount Square Flange Receptacle with No Accessory Threads
•
Rear Box Mount Square Flange Through Bulkhead Receptacle
•
Straight Plug Connector with Accessory Threads
•
Rear Box Mount Jam Nut Receptacle
VG95328 Integrated Backshell Types
Type N Backshell for general-duty applications. This connector-backshell
assembly is supplied with a general-duty backshell for the attachment of
additional accessories such as MS 3057 cable clamps (ordered separately).
Types A, C and D: Backshell for general-duty environmental applications using
unjacketed wire bundles. Additional environmental sealing is provided through an
individual wire sealing grommet in the connector and an overall cable grommet
seal in the backshell. No cable clamp supplied.
Types B, E and K Same as class above, but with cable clamp and bushing for
strain-relief.
Types J, S and V Backshell for Heat Shrink Boot.
Types M, R and T Plug with backshell for EMI shield termination and/or
heatshrink boot.
VG95328 Accessories
•
Plug and receptacle protective covers with various lanyard styles for panel attachment
•
Plug and receptacle covers with various lanyard styles for cable attachment
•
Conductive and non-conductive gaskets for panel mount connectors
•
Dummy stowage receptacles
•
Consult factory for additional products
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 3
E-Mail: [email protected]
VG95328
Introduction
VG95328 Bayonet-Lock
High Performance Crimp Contact Connector
Materials and Finishes
The Glenair VG95328 miniature bayonet-lock connector series features a 3 point bayonet coupling
mating interface with stainless steel coupling pins for advanced durability. Resilient closed entry inserts
provide outstanding dielectric performance and environmental protection. Individual wire sealing
grommets elevate the environmental protection rating to IP67. Conductive metal shells and plating
provide a reliable ground plane for EMI applications when connectors are combined with appropriate
shield termination backshells. Ground springs are also available in selected plug versions to further
enhance EMC. Shells are keyed with five total alternate key positions. Connector shells are supplied
standard in aluminum alloy with cadmium/olive drab passivation. For other plating options please
consult Glenair’s commercial equivalent catalog, IPT and IPT SE Bayonet Lock Connectors. The
connectors are temperature rated from -55°C to +125°C (see opposite page for current ratings versus
temperature). The VG95328 family consists of:
•
•
•
•
•
20 styles of connectors
9 Sizes of Connectors
2 Contact Sizes: #20 and #16
18 Insert Arrangements
2 Kinds of Contacts: Crimp Contacts (Standard); Solder Contacts (Hermetic Versions)
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Cadmium with Olive Drab
Passivation
IAW QQ-P-416
-55°C + 125°C
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
© 2010 Glenair, Inc.
500 hour
Very Good
Very Good
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 4
E-Mail: [email protected]
VG95328
Introduction
VG95328 Bayonet-Lock
High Performance Crimp Contact Connector
Technical Data
Service Rating
Class
Operating voltage AC
I
600
Operating voltage DC
700
Test voltage AC
1500
II
1000
1250
2300
Potential Drop
Contact size
Test current
Potential drop
20
7.5 A
25 mV
16
13.0 A
21 mV
Rated Current Versus Temperature
13
Size 16
Contacts
12
11
10
9
8
AMPS 7
Size 20
Contacts
6
5
4
3
2
1
0
20 30 40 50 60 70 80 90 100 110 120 130
C°
Kilovolts AC RMS
IIA
2
IA Actual min. flashover Ser.I
IT Recommended test Ser. I
IIA Actual min. flashover Ser. II
IIT Recommended test Ser. II
IIT
1
IT
0
0
IA
20
40
60
80
100 120
140 160
180
Altitude Pressure in Thousands of feet
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 5
E-Mail: [email protected]
VG95328
Introduction
VG95328 Bayonet-Lock
High Performance Crimp Contact (MIL-C-26482 Type)
How to Order • Cross Reference
Basic Part Number
VG95328
Alternate Insert Positions
N-W-X-Y-Z
Contact
Arrangement
A
18-11
Connector Style
N
P - Pin contacts
S - Socket contacts
Omit - For Style P Bulkhead
Feed Thrus
Accessory Cross Reference
Connector Cross Reference
VG95328
S
VG95328
Connectors
MS
Glenair
Accessories
MS
VG95328 A
MS 3120 E
IPT 00 SE
VG95328 Z1 A
MS 3181 C
IPT 3181 C
VG95328 B
MS 3120 F
IPT 00 SE … SR
VG95328 Z1 B
N.A.
IPT 3181 CF
VG95328 C
MS 3122 E
IPT 02 SE
VG95328 Z1 C
N.A.
N. A.
VG95328 D
MS 3124 E
IPT 07 SE
VG95328 Z2 A
MS 3180 C
IPT 3180 C
VG95328 E
MS 3124 F
IPT 07 SE … SR
VG95328 Z2 B
N.A.
IPT 3180 CF
VG95328 F
N.A.
N. A.
VG95328 Z2 C
N.A.
N. A.
VG95328 G
N.A.
N. A.
VG95328 Z3 C
N.A.
IPT 3181 NF
VG95328 H
MS 3112 E
IPT 02 E
VG95328 T07 A
N.A.
10-101949
VG95328 J
N.A.
IPT 06 GSE
VG95328 T07 B
N.A.
10-101949 S
VG95328 K
MS 3126 F
IPT 06 SE … SR
VG95328 T07 C
MS 3115
IPT 3115
VG95328 L
N.A.
N. A.
VG95328 T07 D
N.A.
N. A.
VG95328 M
N.A.
IPT G 06 MSE
VG95328 N
N.A.
IPT G 06 ASE
VG95328 P
MS 3119 E
IPT 02 PP
VG95328 R
N.A.
IPT 00 MSE
VG95328 S
N.A.
IPT 07 GSE
VG95328 T
N.A.
IPT 07 MSE
VG95328 U
N.A.
N. A.
VG95328 V
N.A.
IPT G 06 GSE
VG95328 W
N.A.
N. A.
© 2010 Glenair, Inc.
CAGE Code 06324
Glenair
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 6
E-Mail: [email protected]
VG95328
Introduction
Glenair IPT SE
Commercial Equivalent Product Line
Glenair offers a complete commercial equivalent product line, the Series IPT SE, that conforms exactly
to the VG95328 standard but also offers additional connector styles, backshell types, plating codes and other
enhancements. For complete product information see the IPT and IPT SE Bayonet-Lock Connector Catalog.
Shell Size
and Insert
Arrangement
MIL-C-26482
Series I Type
Connector Shell Styles
Mod Code Options
00 - Front Panel Mount Square Flange
Receptacle with Accessory Threads
F2 - Nickel Plating (RoHs)
F6 - Black Electro-deposited Paint (RoHs)
F7 - Black Zn-Co Plating (RoHs)
F8 - Olive Drab Zn-Co Plating
01 - In-Line Receptacle with Accessory
Threads
02 - Rear Box Mount Square Flange
Receptacle with No Accessory Threads
Omit for Standard Finish - Cad/Olive Drab
02PP - Rear Box Mount Square Flange
Through Bulkhead Receptacle
Alternate Insert
Rotation
06 - Straight Plug Connector with
Accessory Threads
07 - Rear Box Mount Jam Nut Receptacle
IPT
G
06
SE
Omit for Normal
18-11
P
X
SR
XX
Environmental Class
ASE - Indicates the Supplied
Connector/Backshell Assembly Does
Not Include a Wire Sealing Grommet
SE, GSE, MSE - Indicates the Supplied
Connector/Backshell Assembly
Includes a Wire Sealing Grommet
Plug
Grounding
Fingers
P - Pin
S - Socket
Accessory Description*
SR - Cable Clamp and Bushing
*Not Used When Environmental Class Code
Incorporates the Backshell Description See Individual Catalog Pages for Details
Omit for
Standard
© 2010 Glenair, Inc.
Contact
Gender
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 7
E-Mail: [email protected]
VG95328
Introduction
VG95328 Bayonet-Lock Connectors
Solder Contacts for Hermetic Styles F, G and H
Plus Crimp Contact Assembly Tools
L1
D1
D2
L2
Termination Dimensions
Contact size
D1
min.
D2
min.
Max.
20
1.1
1.5
2.2
L1
+1.5
-0.4
3.2
16
1.8
2.4
2.9
4.8
L2
±0.8
Color
2.4
Red
3.2
Blue
VG95328 Crimp Connector Assembly Tools
Wires
Cross Section
L
L
Contact Size
L
OA
L
L
mm2
10-314980-20P
10-314980-20S
10-314980-16P
10-314980-16S
20
AWG
Manual
Crimping Tool
Pneumatic
Crimping Tool
Turret
Insertion
Tool
Removal
Tool
20
M.105001
[AF8]
M.105003
[WA27F]
M.105011
[TH1A]
M.117349
[DAK20]
M.118290
[DRK20]
16
M.105001
[AF8]
M.105003
[WA27F]
M.105011
[TH1A]
M.117350
[DAK16]
M.118291
[DRK16]
DMC Part Numbers indicated in [parentheses]
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 8
E-Mail: [email protected]
VG95328
Introduction
10.72
±0.1
4.75
±0.05
ø1.98 +0/-0.05
6.35
Min.
ø1.04 +0/-0.05
ø1.22 +0/-0.05
ø2.16 +0.2/-0
ø1.98 +0/-0.05
ø2.69 +0/-0.05
VG95328 Bayonet-Lock Connectors
Crimp Contact Dimensions
Pin and Socket
23.19
±0.15
Size 20 Pin Contact
10-314980-20P
4.75
±0.05
ø1.98 +0/-0.05
21.69
±0.25
ø2.87 +0/-0.07
9.17
±0.15
ø1.05 Min.
4.75
±0.05
7.37 Min.
ø1.22 +0/-0.05
ø1.98 +0/-0.05
ø2.16 +0.2/-0
6.35
Min.
ø2.69 +0/-0.05
ø1.61 +0/-0.05
Size 16 Pin Contact
10-314980-16P
ø1.61 +0/-0.05
ø1.68 +0.05/-0
ø2.67 +0/-0.1
22.99
±0.2
Size 20 Socket Contact
10-314980-20S
4.75
±0.05
10.72
±0.1
ø1.68
+0.05/-0
ø2.67 +0/-0.1
ø3.76 +0/-0.1
ø5.99 +1.15/-0
ø2.87 +0/-0.07
10.72
±0.1
ø3.76 +0/-0.1
ø5.99 +1.15/-0
7.37 Min.
21.44
±0.2
Size 16 Socket Contact
10-314980-16S
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 9
E-Mail: [email protected]
VG95328
Introduction
VG95328
Insert Arrangement Tables and Sealing Plugs
Sealing Plugs for Socket Cavity
L1
SEALING PLUG DIMENSIONS
D1
D2
Part Number
D1
±0.1
D2
±0.2
L1
±0.1
L2
±0.3
DIN 65194-20
1.62
2.3
3.5
14.5
Red
DIN 65194-16
2.30
3.4
3.1
14.5
Blue
Color
L2
Dim. contact size
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
Arrangement
16
3
12 - 10
I
14 - 5
II
14 - 12
I
14 - 15
I
14 - 19
I
19
16 - 8
II
16 - 23
I
22
16 - 26
I
26
18 - 11
II
18 - 32
I
20 - 16
II
20 - 41
I
22 - 21
II
22 - 55
I
55
24 - 61
I
61
X
8 - 3A
60
(120)
10 - 6
90
12 - 3
10
Y
Z
180
12 - 10
60
155
270
295
5
14 - 5
40
92
184
273
8
4
14 - 12
43
90
14
1
14 - 15
17
110
155
234
14 - 19
30
165
315
180
331
8
16 - 8
54
152
1
16 - 23
158
270
16 - 26
60
275
338
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
22 - 55
30
142
226
314
24 - 61
90
180
270
324
11
32
16
41
21
  
  
Normal
Position
.ORMAL
POSITION
.ORMAL
POSITION
.ORMAL
POSITION
© 2010 Glenair,
Inc.
Degrees
W
Alternate Position
with Socket Contacts
Alternate Position
with Pin Contacts
!LTERNATE
POSITION
WITH
PIN
CONTACTS
!LTERNATE
POSITION
WITH
PIN
CONTACTS
!LTERNATE
POSITION
WITH
PIN
CONTACTS
CAGE
Code
06324
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 10
E-Mail: [email protected]
B
B
A
B
B
A
B
A
B
C A
A
A
B
A
C
B
A
A
C
B
C
A
A D
B
A
B C
B
VG95328
Available Insert Arrangements
B
B
B
A
D
B
3 Contacts
B
C
C
A
C CA A
B
B B
C
A D
CA A
C
B
BBC
A D
D
A
B
C
C
B
A
B
A
A
D
B
B C
A
D
A D
A D
B C
B C
A
D
C
C
A
C
B
B
A
AA D
C
B
B C
A
B
A
C
C
B DE
D
C
A
B
A
E
D
BC
D
B
F
C
C
Arrangement:
14-5
Contact Size:
20
16
Contact Size:
16
Service Rating:
l
ll
Service Rating:
ll
C
A
A
C
C
B
E
A
D BCE
C
C
1
4
3
C
A
E
B
F
D
C
B
6
4
C
2
D
3
A
E
6 Contacts
5
A
B
A
1
E
C
B
D
A
F
B
F
C
D
E
C
E
Arrangement:
10-6
Contact Size:
Service Rating:
A
A
E
B
F
D
D
C
A
B
E
B
F
D
C
B
D
A
F
C E
4
C
1
6
DB
E
D
3
E
D
B
E
C
F
C
D
G
E
C
6
4
3
F
2
6
4
G
F C
B A
B
G F
B
H DEC
C G
E
C
D
D
D
A
E
E
Contact Size:
16
ll
A
A
B F
B
A
BG
H GC
H C C
F E
D
D
D
E
E
A
G A
B H
H
F
E
D
F
C
E
AH B
F H
G
B
C
D
A
G
B
H C
F
H
D
E
JD C
D EG
F
B
H
F
E
B
C
H
F
K
E
F
A
G
C
A
J
B
G
E
G
C
F
AD
H
D
G
C
E
D
B
H
C
G
D
E
H
C
G
D
E
A
K
F
C
A
F
G
B
A
F
C
D
B
G
E
C
D
E
J
G
B
H
D
F
H A
G
C
K
A
J
E
C
D
B
J
M
B
K
L
F
E
C
D
H
G
D
A
12-10
Arrangement:
18-11
Contact Size:
20
Contact Size:
16
Service Rating:
l
Service Rating:
ll
B
K
H
J
F
Arrangement:
A
A
J
B
K
H H AK
B
G
G
CB
J
H A GBL
H
C A B
LK
M
G KF J C D
G K J C
EF L
D
F E F
D
E C
F E D
E D
C
E
C
B
L
F
B
H
FC
E
D
A
K
G
A
G
F
B
D
D
E
A
11 Contacts
E
A
H
B F
H
C
L
E
B
H
F
B
D
J
B
K
H
F
E
Service Rating:
G
G
A
3
l
F
D
B
C
E
25 D
F
20
G
B
D
1
5
B
C1
G
A
16-8
G
10 Contacts
H
E
C
A
A
E
B
F
D
C
C
A
D
F
H
F
B
H
Arrangement:
B
F
F
3A
B
H
A
G
A
8 Contacts
A
G
A
G
A
H
F
4
C
G
2
2
6
3
4
A
5
G
1
2
65
B
G
E
C A
F
E
A
F
1
5
B
2
6
B
D
E
CG
D
A
K
F
G
C
C
D
H
A
B
B
H
F
E
C
12 Contacts
D
G
C
H
M
F
R
A
H A
J K
M
J
L
E
L
B
M
K
R
Arrangement:
14-12
Contact Size:
Service Rating:
A
H
C
D G F
G
B
N
C
D
H A
J
M
J
B
K
L
G
F
E
D
C
D
E
H
G
E
© 2010 Glenair, Inc.
A
F
K
J
15 Contacts
N
D
K
B
P
F
E
R
D
F
M
A
D
C
B
N
H
C L
E
L
R
C
D
G
F
E
J
A
JB A
H
KH
B
A BM C
K
GH A F
D
HM C
H A
E
L
G
G
B C
FK LB GM
D
J
J
F LJ D
MN
K RM
K
L P E
L
E
F
C F
C
E D
E D
l
B
N
K
C
D
E
EE
C
L M
BH A
K J
14-20, 1-16
A
M L BL A A
K MM B B
KN
C
R N N C
J J R
C
H
D P
H
D
A BG CF H EA B C D
G
E
F
D
HDG F FF E H
E
L
E
L
K
J
K
JM
M
J
A
B C
B
A H
KB C
F MA H
E DL
F
HC
G
C
K
EM L
J
JF L K D M
N
R
R
PN
EP
P
D
L
B
J G
M
Contact Size:
ll
M
C
A B C
F
D
H
E
L
K
J
M
Service Rating:
Service Rating:
L
DF
E
K
H A
G
BA
l
16
D
F
K
J
N
R
GF LC
L
A
8-20, 4-16
Contact Size:
K
G
H MB
J
K
14-15
20-16
J
K
G
J
Arrangement:
Arrangement:
C
H
D
F L
16 Contacts
E
B
K
M
B
N
A
H
A
H
J
L
M
R
J
H
G
A
Contact
Legend
F
C
D
E
K
P
R N
P
L
A
L
A
19 Contacts
K
M
R
J
N
H
G
R
F
E
BK
M
J CR
DH
H
B
N
L
R
J
G
C
F
G
M
A
G K
M
F
F L
K
Arrangement:
14-19
Contact Size:
20
Service Rating:
l
B
N
C
BHD
E
16
20
CAGE Code 06324
G
C
F L
11
A
L
B
K
C
D
E
M
A
N
P
F
*Consult Factory
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com J
M
D
R
J
G
E
A
E
H
D
G
A
LB A
M
KN M
B
C
N C
JP R
DP
H E
D
F
G
E
F
HH
R
J
B
N
P
L
R
L
K
J
E-Mail: [email protected]
E
BK
L
J CR
DH
G
M
A
B
N
P
F
C
D
E
B
J
E
J
A
C
A
B
5
B
C
A
A
B
F
B
D
A
AE
D
12-3
A
B
B
C
8-3A
C
B
A
A
E
A
B
B
1
BA
2
E 5
B
6F A B
C
D 4 C
3
D
C
E
Arrangement:
CB
C
A
B
C
A
E
5 Contacts
A
F
C
C B
B
C
B
AA
B BA
BA
D C
E
A
B
A
A
D
A
VG95328
Introduction
A
A
C
D
VG95328
Introduction
B
B
A
A
B
A
A
D
21 Contacts
A D
A D
B C
B C
A
B
B
VG95328
Available Insert Arrangements
B
A
A
A
B D
C
C
23 Contacts
Arrangement:
16-23
16
Contact Size:
22-20, 1-16
Service Rating:
ll
Service Rating:
l
D
E
A
F
C E
A
B
D
E
D
C
E
C
B
F
D
1
5
A
B
F
4
C
1
25
6
3
A
A
A
A
B
D
B
A
F
B
G
A
F
C
B
G
E
C
D
32 Contacts
16-26
Arrangement:
18-32
20
Contact Size:
20
Service Rating:
l
Service Rating:
A
G
A
G
B
H
F
C
G
H
F
B
H
F
D
E
A
G
C
A
E
D
H
B F
C
E
D
D
E
B
H
F
B
E
C
l
A
G
A
G
B
H
FC
D
E
H
C
G
D
A
B
K
H
J
F
E
CG
D
A
K
F
55 Contacts
41 Contacts
Arrangement:
20-41
Contact Size:
20
A
J
H
G
F
l
G
L
E
DF
B
K
C
Arrangement:
A
J
H B
K
Contact Size:
C
L
E
D
Service Rating:
22-55
G
H A
J
M
L
F
E
D
B G
20
K M
l
C F
H A
J
L
E
D
J
B
K
C
A
H
G
J
BH
K
M
F L
M
G
C
D
F L
A
E
61 Contacts
D
J
Arrangement:
24-61
Contact Size:
20
Service Rating:
l
Contact
Legend
N
K
A B C
A B C
F
HD
F
H
E
L
E
L
K
K
JM
M
P
R N
P
L
M
R
J
A
N
H
G
R
16
20
F
E
BK
L
M
J CR
A
DH
K
B
N
C
D
G
F
E
L
M
A
N
P
H
G
F
E
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
12
BK
L
J CR
*Consult Factory
CAGE Code 06324
C
D
E
R
J
B
K
E-Mail: [email protected]
DH
G
M
A
B
N
P
F
C
D
E
B
J
E
A
B
B
B
E
Contact Size:
www.glenair.com C
C
3
Arrangement:
© 2010 Glenair, Inc.
A
C
B
A
B E
C
C
D
26 Contacts
Service Rating:
C
2
6
4
A
B
D
22-21*
B
C
E
Contact Size:
A
A
B
B
Arrangement:
F
C
C
C
D
VG95328
Introduction
VG95328 Bayonet-Lock
High Performance Crimp (MIL-C-26482 Type)
Fastener Height Requirements and Panel Cutout Dimensions
For front panel mount square flange connectors the
“A” dimension indicates the measured maximums
that mounting hardware can stand proud from
the connector flange before it will interfere with
connector mating. For rear box mount square
flange connectors the same “A” column maximum
dimensions apply, but in this case the measurement
taken includes the thickness of the panel wall
or box (so the mounting hardware needs to be
correspondingly shorter). Column “A1” defines the
maximums for the bulkhead feedthrough product
before mounting hardware interferes with mating.
A, B, F & R
C and H P
Panel Thickness and Panel Cutout for Square Flange Mount Receptacles
Types D, E,
S and T
Panel Thickness and Panel Cutout for Jam Nut Mount Receptacles
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 13
E-Mail: [email protected]
VG95328
Connectors
VG95328 A
Bayonet-Lock
Front Panel Mount Square Flange Receptacle
with Backshell
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
A
18-11
S
S - Socket
P - Pin
Connector
Style
L2
N
L3
E
D2*
D1
L1
B
TABLE I: DIMENSIONS
Shell Size
B
Max.
D1
Max
D2 *
Min.
E
±0.15
L1
Max.
L2
+ 0.8
-0
L3
Max.
Maximum
Weight in
Grams
8
21.03
15.44
2.9
15.08
40
10.94
2.0
10
10
24.23
18.64
2.9
18.26
40
10.94
2.0
14
12
26.59
21.79
2.9
20.62
40
10.94
2.0
22
14
28.98
25.00
2.9
23.01
40
10.94
2.0
29
16
31.34
28.19
2.9
24.61
40
10.94
2.0
37
18
33.73
31.34
2.9
26.97
40
10.94
2.0
45
20
36.90
34.54
2.9
29.36
44
14.12
2.8
50
22
40.08
37.69
2.9
31.75
44
14.12
2.8
55
24
43.25
40.89
3.6
34.92
44
14.86
2.8
65
* Through Mounting Holes
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 14
E-Mail: [email protected]
VG95328
Connectors
VG95328 A
Bayonet-Lock
Front Panel Mount Square Flange Receptacle
with Backshell
Contact Arrangements
Alternate Insert Orientations
Dim. contact size
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
12 - 10
I
Degrees
Arrangement
16
3
W
X
8 - 3A
60
(120)
Y
10 - 6
90
12 - 3
10
Z
180
12 - 10
60
155
270
295
184
273
234
14 - 5
II
5
14 - 5
40
92
14 - 12
I
8
4
14 - 12
43
90
14 - 15
I
14
1
14 - 15
17
110
155
14 - 19
I
19
14 - 19
30
165
315
180
331
275
338
16 - 8
II
16 - 23
I
22
16 - 26
I
26
18 - 11
II
18 - 32
I
20 - 16
II
20 - 41
I
22 - 21
II
22 - 55
I
24 - 61
I
8
16 - 8
54
152
1
16 - 23
158
270
16 - 26
60
11
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
55
22 - 55
30
142
226
314
61
24 - 61
90
180
270
324
32
16
41
21
  
  
Normal
Position
.ORMAL
POSITION
.ORMAL
POSITION
.ORMAL
POSITION
Alternate Position
with Socket Contacts
Alternate Position
with Pin Contacts
!LTERNATE
POSITION
WITH
PIN
CONTACTS
!LTERNATE
POSITION
WITH
PIN
CONTACTS
!LTERNATE
POSITION
WITH
PIN
CONTACTS
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
See Page 13 for Panel Thickness and Cutout Dimensions
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 15
E-Mail: [email protected]
VG95328
Connectors
VG95328 B
Bayonet-Lock
Front Panel Mount Square Flange Receptacle
with Backshell, Cable Clamp and Bushing
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
B
18-11
N
S - Socket
P - Pin
Connector
Style
L2
S
E
D2*
L3
D3 H
D1
L1
B
TABLE I: DIMENSIONS
Shell size
B
Max.
D1
Max.
D2 *
Min.
D3
+ 0.3
- 0.7
E
±0.15
H
Max.
L1
Max.
L2
+ 0.8
-0
L3
Max.
Maximum
Weight in
Grams
8
21.03
15.44
2.9
3.2
15.08
21.1
61.5
10.94
2.0
20
10
24.23
18.64
2.9
4.8
18.26
22.7
61.5
10.94
2.0
22
12
26.59
27.79
2.9
7.9
20.62
25.9
61.5
10.94
2.0
29
14
28.98
25.00
2.9
9.5
23.01
29.0
61.5
10.94
2.0
40
16
31.34
28.19
2.9
12.7
24.61
30.6
64.4
10.94
2.0
51
18
33.73
31.34
2.9
15.9
26.97
37.4
64.4
10.94
2.0
62
20
36.90
34.54
2.9
15.9
29.36
37.4
71.1
14.12
2.8
70
22
40.08
37.69
2.9
19.1
31.75
42.1
71.1
14.12
2.8
75
24
43.25
40.89
3.6
20.3
34.92
44.5
73.6
14.96
2.8
87
* Through Mounting Holes
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 16
E-Mail: [email protected]
VG95328
Connectors
VG95328 B
Bayonet-Lock
Front Panel Mount Square Flange Receptacle
with Backshell, Cable Clamp and Bushing
Contact Arrangements
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
12 - 10
I
14 - 5
II
14 - 12
I
14 - 15
14 - 19
Alternate Insert Orientations
Dim. contact size
Degrees
Arrangement
16
3
W
X
8 - 3A
60
(120)
10 - 6
90
Y
12 - 3
10
Z
180
12 - 10
60
155
270
295
5
14 - 5
40
92
184
273
8
4
14 - 12
43
90
I
14
1
14 - 15
17
110
155
234
I
19
14 - 19
30
165
315
180
331
275
338
16 - 8
II
16 - 23
I
22
16 - 26
I
26
18 - 11
II
18 - 32
I
20 - 16
II
20 - 41
I
22 - 21
II
22 - 55
I
55
24 - 61
I
61
8
16 - 8
54
152
1
16 - 23
158
270
16 - 26
60
11
32
16
41
21
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
22 - 55
30
142
226
314
24 - 61
90
180
270
324
  
  
Normal
Position
.ORMAL
POSITION
.ORMAL
POSITION
.ORMAL
POSITION
Alternate Position
with Socket Contacts
Alternate Position
with Pin Contacts
!LTERNATE
POSITION
WITH
PIN
CONTACTS
!LTERNATE
POSITION
WITH
PIN
CONTACTS
!LTERNATE
POSITION
WITH
PIN
CONTACTS
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
500 hour
Very Good
Very Good
See Page 13 for Panel Thickness and Cutout Dimensions
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 17
E-Mail: [email protected]
VG95328
Connectors
VG95328 C
Bayonet-Lock
Rear Box Mount Square Flange Receptacle
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
C
18-11
D2*
L3
N
S - Socket
P - Pin
Connector
Style
L2
S
E
D1
10.3 Max.
L1
B
TABLE I: DIMENSIONS
Shell size
B
Max.
D1
+ 0.8
- 0.6
D2 *
Min.
E
± 0.15
L1
Max.
L2
+ 0.8
-0
L3
Max.
Maximum
Weight in
Grams
8
21.03
11.2
2.9
15.08
33.5
10.94
2.0
6
10
24.23
14.3
2.9
18.26
33.5
10.94
2.0
7
12
26.59
17.5
2.9
20.62
33.5
10.94
2.0
10
14
28.98
20.7
2.9
23.01
33.5
10.94
2.0
12
16
31.34
23.9
2.9
24.61
33.5
10.94
2.0
14
18
33.73
27.0
2.9
26.97
33.5
10.94
2.0
17
20
36.90
30.2
2.9
29.36
34.7
14.12
2.8
21
22
40.08
33.4
2.9
31.75
36.0
14.12
2.8
25
24
43.25
36.6
3.6
34.92
36.0
14.96
2.8
27
* Through Mounting Holes
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 18
E-Mail: [email protected]
VG95328
Connectors
VG95328 C
Bayonet-Lock
Rear Box Mount Square Flange Receptacle
Contact Arrangements
Alternate Insert Orientations
Dim. contact size
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
3
12 - 10
I
14 - 5
II
14 - 12
I
14 - 15
I
14 - 19
I
19
16 - 8
II
16 - 23
I
22
16 - 26
I
26
18 - 11
II
Degrees
Arrangement
16
W
X
8 - 3A
60
(120)
10 - 6
90
Y
12 - 3
10
Z
180
12 - 10
60
155
270
295
5
14 - 5
40
92
184
273
8
4
14 - 12
43
90
14
1
14 - 15
17
110
155
234
14 - 19
30
165
315
8
16 - 8
54
152
180
331
1
16 - 23
158
270
16 - 26
60
275
338
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
11
18 - 32
I
20 - 16
II
32
20 - 41
I
22 - 21
II
22 - 21
16
135
175
349
22 - 55
I
55
22 - 55
30
142
226
314
24 - 61
I
61
24 - 61
90
180
270
324
16
41
21
  
  
Normal
Position
.ORMAL
POSITION
.ORMAL
POSITION
.ORMAL
POSITION
Alternate Position
with Socket Contacts
Alternate Position
with Pin Contacts
!LTERNATE
POSITION
WITH
PIN
CONTACTS
!LTERNATE
POSITION
WITH
PIN
CONTACTS
!LTERNATE
POSITION
WITH
PIN
CONTACTS
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
See Page 13 for Panel Thickness and Cutout Dimensions
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 19
E-Mail: [email protected]
VG95328
Connectors
VG95328 D
Bayonet-Lock
Rear Panel Mount Jam Nut Receptacle
with Backshell
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
D
18-11
S
N
S - Socket
P - Pin
Connector
Style
L1
L2
L4
D3
D1 B2
D2
S
L3
3.6 Max.
B1
TABLE I: DIMENSIONS
Shell size
B1
Max.
B2
+0
- 0.25
D1
D2
Min.
D3
+0
- 0.8
L1
Max.
L2
+ 0.8
-0
L3
Min.
L4
± 0.5
S
± 0.43
Maximum
Weight in
Grams
8
24.3
13.46
0.5625 - 24 UNEF
19.0
27.3
39.3
17.5
9.75
3.0
19.05
20
10
27.4
16.64
0.6875 - 24 UNEF
22.2
30.5
39.3
17.5
9.75
3.0
22.23
21
12
32.2
20.78
0.8750 - 20 UNEF
25.4
35.3
39.3
17.5
9.75
3.0
26.97
30
14
35.4
23.93
1.0000 - 20 UNEF
28.5
38.5
39.3
17.5
9.75
3.0
30.18
39
16
38.6
27.08
1.1250 - 18 UNEF
31.7
41.6
39.3
17.5
9.75
3.0
33.32
49
18
41.7
30.25
1.2500 - 18 UNEF
34.9
44.8
39.3
17.5
9.75
3.0
36.53
57
20
46.5
33.43
1.3750 - 18 UNEF
38.8
49.6
43.4
22.3
11.32
3.8
39.67
78
22
49.7
36.60
1.5000 - 18 UNEF
42.0
52.7
43.4
22.3
11.32
3.8
42.88
97
24
52.8
39.78
1.6250 - 18 UNEF
45.2
55.9
43.4
23.1
12.16
3.8
46.02
115
Single Hole Mounting
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 20
E-Mail: [email protected]
VG95328
Connectors
VG95328 D
Bayonet-Lock
Rear Panel Mount Jam Nut Receptacle
with Backshell
Contact Arrangements
Alternate Insert Orientations
Dim. contact size
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
12 - 10
I
Degrees
Arrangement
16
3
W
X
8 - 3A
60
(120)
10 - 6
90
Y
12 - 3
10
Z
180
12 - 10
60
155
270
295
184
273
234
14 - 5
II
5
14 - 5
40
92
14 - 12
I
8
4
14 - 12
43
90
14 - 15
I
14
1
14 - 15
17
110
155
14 - 19
I
19
14 - 19
30
165
315
16 - 8
II
8
16 - 8
54
152
180
331
16 - 23
I
22
1
16 - 23
158
270
16 - 26
I
26
16 - 26
60
275
338
18 - 11
II
18 - 32
I
20 - 16
II
20 - 41
I
22 - 21
II
22 - 55
I
24 - 61
I
11
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
55
22 - 55
30
142
226
314
61
24 - 61
90
180
270
324
32
16
41
21
α
Alternate Position
with Pin Contacts
Normal
Position
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
α
Alternate Position with
Socket Contacts
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
See Page 13 for Panel Thickness and Cutout Dimensions
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 21
E-Mail: [email protected]
VG95328
Connectors
VG95328 E
Bayonet-Lock
Rear Panel Mount Jam Nut Receptacle
with Cable Clamp and Bushing
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
E
18-11
S
N
S - Socket
P - Pin
Connector
Style
L1
L2
L4
D4
D3
D1 B2
L3
H D2 S
3 Max.
3.6
Max.
B1
TABLE I: DIMENSIONS
B1
Max.
B2
+0
-0.25
D1
D2
Min.
D3
+ 0.3
- 0.7
D4
+0
- 0.8
L1
Max.
L2
+ 0.8
-0
L3
Min.
L4
± 0.15
S
± 0.43
Maximum
Weight in
Grams
8
24.3
13.46
0.5625 - 24 UNEF
19.0
3.2
27.3
61.5
17.5
9.75
3.0
19.05
25
10
27.4
16.64
0.6875 - 24 UNEF
22.2
4.8
30.5
61.5
17.5
9.75
3.0
22.23
25
12
32.2
20.78
0.8750 - 20 UNEF
25.4
7.9
35.3
61.5
17.5
9.75
3.0
26.97
37
14
35.4
23.93
1.0000 - 20 UNEF
28.5
9.5
38.5
61.5
17.5
9.75
3.0
30.18
50
16
38.6
27.08
1.1250 - 18 UNEF
31.7
12.7
41.6
64.4
17.5
9.75
3.0
33.32
63
18
41.7
30.25
1.2500 - 18 UNEF
34.9
15.9
44.8
64.4
17.5
9.75
3.0
36.53
74
20
46.5
33.43
1.3750 - 18 UNEF
38.8
15.9
49.6
71.1
22.3
11.32
3.8
39.67
97
22
49.7
36.60
1.5000 - 18 UNEF
42.0
19.1
52.7
71.1
22.3
11.32
3.8
42.88
117
24
52.8
39.78
1.6250 - 18 UNEF
45.2
20.3
55.9
73.6
23.1
12.16
3.8
46.02
137
Shell size
Single Hole Mounting
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 22
E-Mail: [email protected]
VG95328
Connectors
VG95328 E
Bayonet-Lock
Rear Panel Mount Jam Nut Receptacle
with Cable Clamp and Bushing
Contact Arrangements
Alternate Insert Orientations
Dim. contact size
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
3
12 - 10
I
14 - 5
II
14 - 12
I
14 - 15
14 - 19
16 - 8
II
16 - 23
I
22
16 - 26
I
26
18 - 11
II
18 - 32
I
20 - 16
II
20 - 41
I
22 - 21
II
22 - 55
I
55
24 - 61
I
61
Degrees
Arrangement
16
W
X
8 - 3A
60
(120)
10 - 6
90
Y
12 - 3
10
Z
180
12 - 10
60
155
270
295
5
14 - 5
40
92
184
273
8
4
14 - 12
43
90
I
14
1
14 - 15
17
110
155
234
I
19
14 - 19
30
165
315
180
331
8
16 - 8
54
152
1
16 - 23
158
270
16 - 26
60
275
338
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
22 - 55
30
142
226
314
24 - 61
90
180
270
324
11
32
16
41
21
α
α
Alternate Position
with Pin Contacts
Normal
Position
Alternate Position with
Socket Contacts
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
500 hour
Very Good
Very Good
See Page 13 for Panel Thickness and Cutout Dimensions
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 23
E-Mail: [email protected]
VG95328
Connectors
VG95328 F
Bayonet-Lock
Rear Panel Mount Hermetic Jam Nut
Receptacle with Pin Solder Contacts
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
F
18-11
Connector
Style
P
N
P - Pin Only
L1
L2
L4
D4
D1 B2
S
L3
3.6 Max
B1
TABLE I: DIMENSIONS
Shell
Size
B1
Max
B2
+0
-0.25
D1
D4
+0
-0.8
L1
Max
L2
+0.8
-0
L3
Min
L4
± 0.15
S
± 0.43
Maximum
Weight in
Grams
8
24.3
13.46
0.5626 - 24 UNEF
27.3
26.0
17.5
9.75
3.0
19.05
20
10
27.4
16.64
0.6875 - 24 UNEF
30.5
26.0
17.5
9.75
3.0
22.23
26
12
32.2
20.78
0.8750 - 20 UNEF
35.3
26.0
17.5
9.75
3.0
26.97
40
14
35.4
23.93
1.0000 - 20 UNEF
38.5
26.0
17.5
9.75
3.0
30.18
46
16
38.6
27.08
1.1250 - 18 UNEF
41.6
26.0
17.5
9.75
3.0
33.32
56
18
41.7
30.25
1.2500 - 18 UNEF
44.8
26.0
17.5
9.75
3.0
36.53
68
20
46.5
33.43
1.3750 - 18 UNEF
49.6
32.0
22.3
22.3
3.8
39.67
90
22
49.7
36.60
1.5000 - 18 UNEF
52.7
32.0
22.3
22.3
3.8
42.88
105
24
52.8
39.78
1.6250 - 18 UNEF
55.9
32.0
23.1
23.1
3.8
46.02
115
Single Hole Mounting
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 24
E-Mail: [email protected]
VG95328
Connectors
VG95328 F
Bayonet-Lock
Rear Panel Mount Hermetic Jam Nut
Receptacle with Pin Solder Contacts
Contact Arrangements
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
12 - 10
I
Alternate Insert Orientations
Dim. contact size
Arrangement
16
3
Degrees
W
X
8 - 3A
60
(120)
10 - 6
90
Y
12 - 3
10
180
12 - 10
60
155
270
295
184
273
234
14 - 5
II
5
14 - 5
40
92
14 - 12
I
8
4
14 - 12
43
90
14 - 15
I
14
1
14 - 15
17
110
155
14 - 19
I
19
16 - 8
II
16 - 23
I
22
16 - 26
I
26
18 - 11
II
18 - 32
I
20 - 16
II
Z
14 - 19
30
165
315
8
16 - 8
54
152
180
331
1
16 - 23
158
270
16 - 26
60
275
338
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
11
32
16
20 - 41
I
22 - 21
II
41
22 - 55
I
55
22 - 55
30
142
226
314
24 - 61
I
61
24 - 61
90
180
270
324
21
α
α
Class F, G and H hermetic versions
not qualified to VG95328.
Please consult factory for
Glenair commercial equivalent
MIL-DTL-26482 and VG95328 type
hermetic connectors.
Normal
Position
Alternate Position
with Pin Contacts
MATERIALS
SHELLS
INSERTS
Aluminum Alloy
IAW QQ-A-591 Shells
Glass
Stainless Steel
Coupling Pins
SOLDER CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
Alternate Position with
Socket Contacts
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
See Page 13 for Panel Thickness and Cutout Dimensions
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 25
E-Mail: [email protected]
VG95328
Connectors
VG95328 G
Bayonet-Lock
Solder Mount Hermetic Receptacle
with Pin Solder Contacts
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
G
18-11
Connector
Style
L2
P
N
P - Pin Only
L3
D1
D2
L1
TABLE I: DIMENSIONS
Shell
Size
D1
+0.02
-0.13
D2
±0.4
L1
Max
L2
+0.8
-0
L3
+0.4
-0.13
Maximum
Weight in
Grams
8
14.27
15.9
21.0
10.5
0.8
8
10
17.07
19.1
21.0
10.5
0.8
13
12
19.84
21.4
21.0
10.5
0.8
20
14
23.01
24.6
21.0
10.5
0.8
23
16
26.19
27.8
21.0
10.5
0.8
26
18
29.36
30.9
21.0
10.5
0.8
32
20
31.75
33.3
22.6
12.1
0.8
44
22
34.92
36.5
23.4
12.1
0.8
56
24
38.10
39.7
23.4
12.9
0.8
60
Single Hole Mounting
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 26
E-Mail: [email protected]
VG95328
Connectors
VG95328 G
Bayonet-Lock
Solder Mount Hermetic Receptacle
with Pin Solder Contacts
Contact Arrangements
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
12 - 10
I
Alternate Insert Orientations
Dim. contact size
Degrees
Arrangement
16
3
W
X
8 - 3A
60
(120)
10 - 6
90
Y
12 - 3
10
180
12 - 10
60
155
270
295
184
273
234
14 - 5
II
5
14 - 5
40
92
14 - 12
I
8
4
14 - 12
43
90
14 - 15
I
14
1
14 - 15
17
110
155
14 - 19
I
19
16 - 8
II
16 - 23
I
22
16 - 26
I
26
18 - 11
II
18 - 32
I
20 - 16
II
Z
14 - 19
30
165
315
8
16 - 8
54
152
180
331
1
16 - 23
158
270
16 - 26
60
275
338
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
11
32
16
20 - 41
I
22 - 21
II
41
22 - 55
I
55
22 - 55
30
142
226
314
24 - 61
I
61
24 - 61
90
180
270
324
21
α
α
Class F, G and H hermetic versions
not qualified to VG95328.
Please consult factory for
Glenair commercial equivalent
MIL-DTL-26482 and VG95328 type
hermetic connectors.
Alternate Position
with Pin Contacts
Normal
Position
MATERIALS
SHELLS
INSERTS
Aluminum Alloy
IAW QQ-A-591 Shells
Glass
Stainless Steel
Coupling Pins
SOLDER CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
Alternate Position with
Socket Contacts
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Consult Factory for Panel Thickness and Cutout Dimensions
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 27
E-Mail: [email protected]
VG95328
Connectors
VG95328 H
Bayonet-Lock
Front Panel Mount Square Flange Hermetic Receptacle
with Solder Contacts
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
H
18-11
N
S - Socket
P - Pin
Connector
Style
D2 *
L3
L2
S
E
D1
L1
B
TABLE I: DIMENSIONS
Shell
Size
B
Max
D1
+0.8
-0.6
D2 *
Min
E
±0.15
L1
Max
L2
+0.8
-0
L3
Max
Maximum
Weight in
Grams
8
21.03
11.2
2.9
15.08
24.9
10.94
2.0
7
10
24.23
14.3
2.9
18.26
24.9
10.94
2.0
10
12
26.59
17.5
2.9
20.62
24.9
10.94
2.0
20
14
28.98
20.7
2.9
23.01
24.9
10.94
2.0
20
16
31.34
23.9
2.9
24.61
24.9
10.94
2.0
28
18
33.73
27.0
2.9
26.97
24.9
10.94
2.0
34
20
36.90
30.2
2.9
29.36
30.4
14.12
2.8
43
22
40.08
33.4
2.9
31.75
30.4
14.12
2.8
55
24
43.25
36.6
3.6
34.92
30.4
14.96
2.8
70
* Through Mounting Holes
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 28
E-Mail: [email protected]
VG95328
Connectors
VG95328 H
Bayonet-Lock
Front Panel Mount Square Flange Hermetic Receptacle
with Solder Contacts
Contact Arrangements
Alternate Insert Orientations
Dim. contact size
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
3
12 - 10
I
14 - 5
II
14 - 12
I
14 - 15
14 - 19
16 - 8
II
16 - 23
I
22
16 - 26
I
26
18 - 11
II
18 - 32
I
20 - 16
II
20 - 41
I
22 - 21
II
22 - 55
I
55
24 - 61
I
61
Degrees
Arrangement
16
W
X
8 - 3A
60
(120)
Y
10 - 6
90
12 - 3
10
Z
180
12 - 10
60
155
270
295
5
14 - 5
40
92
184
273
8
4
14 - 12
43
90
I
14
1
14 - 15
17
110
155
234
I
19
14 - 19
30
165
315
180
331
8
16 - 8
54
152
1
16 - 23
158
270
16 - 26
60
275
338
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
22 - 55
30
142
226
314
24 - 61
90
180
270
324
11
32
16
41
21
  
  
Normal
Position
.ORMAL
POSITION
.ORMAL
POSITION
.ORMAL
POSITION
Alternate Position
with Socket Contacts
Alternate Position
with Pin Contacts
Class F, G!LTERNATE
and
HPOSITION
hermetic
versions
not qualified
to
VG95328.
!LTERNATE
POSITION
WITH
PIN
CONTACTS
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
!LTERNATE
POSITION
WITH
PIN
CONTACTS
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
WITH
PIN
CONTACTS
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
Please consult factory for Glenair commercial equivalent
MIL-DTL-26482 and VG95328 type hermetic connectors.
MATERIALS
SHELLS
INSERTS
Aluminum Alloy
IAW QQ-A-591 Shells
Glass
Stainless Steel
Coupling Pins
SOLDER CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
500 hour
Very Good
Very Good
See Page 13 for Panel Thickness and Cutout Dimensions
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 29
E-Mail: [email protected]
VG95328
Connectors
VG95328 J
Bayonet-Lock
Straight Plug Connector
with Shrinkboot Backshell
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
J
18-11
S
N
S - Socket
P - Pin
Connector
Style
L2
D3 D2
3.5 + 0.2
L1
D1
TABLE I: DIMENSIONS
D1
Max.
D2
+0
- 0.5
D3
+0
- 0.5
L1
Max.
L2
± 0.5
Maximum
Weight in
Grams
8
19.8
15.6
13.3
39
12.2
14
10
23.5
18.4
16.1
39
12.2
16
12
26.5
23.7
21.4
39
12.2
23
14
30.0
24.5
22.2
39
12.2
30
16
33.1
29.8
26.2
39
14.5
43
18
35.3
32.0
28.5
39
14.5
46
20
38.8
36.1
32.5
44
15.8
63
22
42.0
38.5
34.8
44
15.8
78
24
45.1
41.6
37.9
44
14.9
84
Shell size
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 30
E-Mail: [email protected]
VG95328
Connectors
VG95328 J
Bayonet-Lock
Straight Plug Connector
with Shrinkboot Backshell
Contact Arrangements
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
12 - 10
I
Alternate Insert Orientations
Dim. contact size
Degrees
Arrangement
16
3
W
X
8 - 3A
60
(120)
10 - 6
90
12 - 3
10
Y
180
12 - 10
60
155
270
295
184
273
234
14 - 5
II
5
14 - 5
40
92
14 - 12
I
8
4
14 - 12
43
90
14 - 15
I
14
1
14 - 15
17
110
155
14 - 19
I
19
16 - 8
II
16 - 23
I
22
16 - 26
I
26
18 - 11
II
18 - 32
I
20 - 16
II
Z
14 - 19
30
165
315
8
16 - 8
54
152
180
331
1
16 - 23
158
270
16 - 26
60
275
338
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
11
32
16
20 - 41
I
22 - 21
II
41
22 - 55
I
55
22 - 55
30
142
226
314
24 - 61
I
61
24 - 61
90
180
270
324
21
α
α
Alternate Position
with Pin Contacts
Normal
Position
Alternate Position with
Socket Contacts
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
© 2010 Glenair, Inc.
CAGE Code 06324
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 31
E-Mail: [email protected]
VG95328
Connectors
VG95328 K
Bayonet-Lock
Straight Plug Connector
with Cable Clamp and Bushing
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
K
18-11
S
N
S - Socket
P - Pin
Connector
Style
3 Max.
D3
H
L
D1
TABLE I: DIMENSIONS
D1
Max.
D3
+ 0.3
- 0.7
H
Max.
L
Max.
Maximum
Weight in
Grams
8
19.8
3.2
21.1
61.3
22
10
23.5
4.8
22.7
61.3
24
12
26.5
7.9
25.9
61.3
30
14
30.0
9.5
29.0
61.3
40
16
33.1
12.7
30.6
64.3
47
18
35.3
15.9
37.4
64.3
62
20
38.8
15.9
37.4
70.0
79
22
42.0
19.1
42.1
70.0
97
24
45.1
20.3
44.5
71.9
104
Shell size
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 32
E-Mail: [email protected]
VG95328
Connectors
VG95328 K
Bayonet-Lock
Straight Plug Connector
with Cable Clamp and Bushing
Contact Arrangements
Alternate Insert Orientations
Dim. contact size
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
12 - 10
I
Degrees
Arrangement
16
3
W
X
8 - 3A
60
(120)
10 - 6
90
12 - 3
10
Y
Z
180
12 - 10
60
155
270
295
184
273
234
14 - 5
II
5
14 - 5
40
92
14 - 12
I
8
4
14 - 12
43
90
14 - 15
I
14
1
14 - 15
17
110
155
14 - 19
I
19
14 - 19
30
165
315
16 - 8
II
8
16 - 8
54
152
180
331
16 - 23
I
22
1
16 - 23
158
270
16 - 26
I
26
16 - 26
60
275
338
18 - 11
II
18 - 32
I
20 - 16
II
20 - 41
I
22 - 21
II
22 - 55
I
24 - 61
I
11
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
55
22 - 55
30
142
226
314
61
24 - 61
90
180
270
324
32
16
41
21
α
α
Alternate Position
with Pin Contacts
Normal
Position
Alternate Position with
Socket Contacts
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
© 2010 Glenair, Inc.
CAGE Code 06324
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 33
E-Mail: [email protected]
VG95328
Connectors
VG95328 L
Bayonet-Lock
Straight Plug Connector with Thumb-Lock Lever
and Heat-Shrink Boot Backshell
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
L
18-11
S
N
S - Socket
P - Pin
Connector
Style
34 ±1
H
D2
D3
0.4 Max
2.5 ±0.1
D1
7.5 - 0.1
28 Max
TABLE I: DIMENSIONS
© 2010 Glenair, Inc.
Shell
Size
D1
±1
D2
± 0.5
D3
± 0.5
H
±1
Maximum
Weight in
Grams
14
28
19.0
21
20
16
16
31
22.2
24
21
16
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 34
E-Mail: [email protected]
VG95328
Connectors
VG95328 L
Bayonet-Lock
Straight Plug Connector with Thumb-Lock Lever
and Heat-Shrink Boot Backshell
Contact Arrangements
Alternate Insert Orientations
Dim. contact size
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
Arrangement
16
3
12 - 10
I
14 - 5
II
14 - 12
I
14 - 15
I
14 - 19
I
19
16 - 8
II
16 - 23
I
22
16 - 26
I
26
18 - 11
II
Degrees
W
X
8 - 3A
60
(120)
10 - 6
90
12 - 3
10
Y
Z
180
12 - 10
60
155
270
295
5
14 - 5
40
92
184
273
8
4
14 - 12
43
90
14
1
14 - 15
17
110
155
234
14 - 19
30
165
315
180
331
8
16 - 8
54
152
1
16 - 23
158
270
16 - 26
60
275
338
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
11
18 - 32
I
20 - 16
II
32
20 - 41
I
22 - 21
II
22 - 21
16
135
175
349
22 - 55
I
55
22 - 55
30
142
226
314
24 - 61
I
61
24 - 61
90
180
270
324
16
41
21
α
α
Class L, U, and W Thumb-Lock
versions not qualified to VG95328.
Please consult factory for Glenair
commercial equivalent
VG95328 type
Thumb-Lock connectors
Alternate Position
with Pin Contacts
Normal
Position
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
© 2010 Glenair, Inc.
CAGE Code 06324
Alternate Position with
Socket Contacts
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 35
E-Mail: [email protected]
VG95328
Connectors
VG95328 M
Bayonet-Lock
Straight Plug Connector
with Ground-Fingers and EMI Shrink-Boot Backshell
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
M
18-11
S
N
S - Socket
P - Pin
Connector
Style
L1
L2
3.5 + 0.2
D3 D4 D5 D2 D6
1
L3
D1
62 Max.
TABLE I: DIMENSIONS
Shell size
D1
Max.
D2
+ 0.5
-0
D3
Min.
D4
D5
+0
-1
D6
Max.
L1
+0
- 2.5
L2
+1.5
-0
L3
Min.
Maximum
Weight in
Grams
8
19.8
16
6.6
M14 x 1
14.0
20
17
5
4
27
10
23.5
18
9.2
M16 x 1
16.0
23
17
5
4
29
12
26.5
22
12.2
M20 x 1
20.0
27
17
7
5
35
14
30.0
25
15.2
M23 x 1
23.0
30
18
8
6
45
16
33.1
28
18.3
M26 x 1
26.0
33
18
8
6
52
18
35.3
32
20.0
M30 x 1
28.5
36
18
10
6
67
20
38.8
34
23.0
M32 x 1
30.5
40
18
10
6
84
22
42.0
38
26.0
M36 x 1
34.5
43
18
10
6
102
24
45.1
41
28.8
M39 x 1
37.5
46
18
10
6
109
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 36
E-Mail: [email protected]
VG95328
Connectors
VG95328 M
Bayonet-Lock
Straight Plug Connector
with Ground-Fingers and EMI Shrink-Boot Backshell
Contact Arrangements
Alternate Insert Orientations
Dim. contact size
Degrees
Arrangement
Cl. Isol.
Rating
20
W
X
8 - 3A
I
3
8 - 3A
60
(120)
10 - 6
I
6
10 - 6
90
12 - 3
II
12 - 10
I
Arrangement
16
3
12 - 3
10
Y
Z
180
12 - 10
60
155
270
295
184
273
234
14 - 5
II
5
14 - 5
40
92
14 - 12
I
8
4
14 - 12
43
90
14 - 15
I
14
1
14 - 15
17
110
155
14 - 19
I
19
14 - 19
30
165
315
16 - 8
II
8
16 - 8
54
152
180
331
16 - 23
I
22
1
16 - 23
158
270
16 - 26
I
26
16 - 26
60
275
338
18 - 11
II
18 - 32
I
20 - 16
II
11
32
16
41
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
20 - 41
I
22 - 21
II
22 - 55
I
55
22 - 55
30
142
226
314
24 - 61
I
61
24 - 61
90
180
270
324
21
α
α
Alternate Position
with Pin Contacts
Normal
Position
Alternate Position with
Socket Contacts
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
© 2010 Glenair, Inc.
CAGE Code 06324
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 37
E-Mail: [email protected]
VG95328
Connectors
VG95328 N
Bayonet-Lock
Straight Plug Connector
with Backshell to Accommodate MS3057 Cable Clamp
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
N
18-11
S
N
S - Socket
P - Pin
Connector
Style
10
Min.
D3 D2
50 Max.
D1
TABLE I: DIMENSIONS
D1
Max.
D2
D3
Min.
Maximum
Weight in
Grams
8
19.8
0.5000 - 28UNEF
6.6
22
10
23.5
0.6250 - 24UNEF
9.2
22
12
26.5
0.7500 - 20UNEF
12.2
28
14
30.0
0.8750 - 20UNEF
15.2
38
16
33.1
1.0000 - 20UNEF
18.3
45
18
35.3
1.1875 - 18UNEF
20.0
60
20
38.8
1.1875 - 18UNEF
23.0
77
22
42.0
1.4375 - 18UNEF
26.0
95
24
45.1
1.4375 - 18UNEF
28.8
102
Shell size
Cable Clamp Sold Separately
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 38
E-Mail: [email protected]
VG95328
Connectors
VG95328 N
Bayonet-Lock
Straight Plug Connector
with Backshell to Accommodate MS3057 Cable Clamp
Contact Arrangements
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
12 - 10
I
Alternate Insert Orientations
Dim. contact size
Degrees
Arrangement
16
3
W
X
8 - 3A
60
(120)
10 - 6
90
Y
12 - 3
10
180
12 - 10
60
155
270
295
184
273
234
14 - 5
II
5
14 - 5
40
92
14 - 12
I
8
4
14 - 12
43
90
14 - 15
I
14
1
14 - 15
17
110
155
14 - 19
I
19
16 - 8
II
16 - 23
I
22
16 - 26
I
26
18 - 11
II
18 - 32
I
20 - 16
II
Z
14 - 19
30
165
315
8
16 - 8
54
152
180
331
1
16 - 23
158
270
16 - 26
60
275
338
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
11
32
16
20 - 41
I
22 - 21
II
41
22 - 55
I
55
22 - 55
30
142
226
314
24 - 61
I
61
24 - 61
90
180
270
324
21
α
Alternate Position
with Pin Contacts
Normal
Position
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
© 2010 Glenair, Inc.
CAGE Code 06324
α
Alternate Position with
Socket Contacts
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 39
E-Mail: [email protected]
VG95328
Connectors
VG95328 P
Bayonet-Lock
Rear Mount Square Flange Through Bulkhead Receptacle
Pre-Assembled with Solid Contacts
Shell Size and
Insert
Arrangements
VG95328
P
18-11
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Connector
Style
D2*
L3
L2
N
Socket Side
E
Pin Side
L4
B
L1
TABLE I: DIMENSIONS
B
Max.
D2 *
Min.
E
± 0.15
L1
Max.
L2
+ 0.79
-0
L3
± 0.4
L4
Max.
Maximum
Weight in
Grams
8
21.03
2.9
15.08
29
14.27
1.57
5.54
10
10
24.23
2.9
18.26
29
14.27
1.57
5.54
11
12
26.59
2.9
20.62
29
14.27
1.57
5.54
14
14
28.98
2.9
23.01
29
14.27
1.57
5.54
16
16
31.34
2.9
24.61
29
14.27
1.57
5.54
18
18
33.73
2.9
26.97
29
14.27
1.57
5.54
21
20
36.90
2.9
29.36
36
17.47
2.39
8.74
25
22
40.08
2.9
31.75
36
17.47
2.39
8.74
29
24
43.25
3.6
34.92
36
17.47
2.39
7.90
31
Shell size
* Through Mounting Holes
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 40
E-Mail: [email protected]
VG95328
Connectors
VG95328 P
Bayonet-Lock
Rear Mount Square Flange Through Bulkhead Receptacle
Pre-Assembled with Solid Contacts
Contact Arrangements
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
12 - 10
I
Alternate Insert Orientations
Dim. contact size
Degrees
Arrangement
16
3
W
X
8 - 3A
60
(120)
10 - 6
90
Y
12 - 3
10
180
12 - 10
60
155
270
295
184
273
234
14 - 5
II
5
14 - 5
40
92
14 - 12
I
8
4
14 - 12
43
90
14 - 15
I
14
1
14 - 15
17
110
155
14 - 19
I
19
16 - 8
II
16 - 23
I
22
16 - 26
I
26
18 - 11
II
18 - 32
I
20 - 16
II
Z
14 - 19
30
165
315
8
16 - 8
54
152
180
331
1
16 - 23
158
270
16 - 26
60
275
338
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
11
32
16
20 - 41
I
22 - 21
II
41
22 - 55
I
55
22 - 55
30
142
226
314
24 - 61
I
61
24 - 61
90
180
270
324
21
  
  
Normal
Position
.ORMAL
POSITION
.ORMAL
POSITION
.ORMAL
POSITION
Alternate Position
with Socket Contacts
Alternate Position
with Pin Contacts
!LTERNATE
POSITION
WITH
PIN
CONTACTS
!LTERNATE
POSITION
WITH
PIN
CONTACTS
!LTERNATE
POSITION
WITH
PIN
CONTACTS
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
SOLID CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
500 hour
Very Good
Very Good
See Page 13 for Panel Thickness and Cutout Dimensions
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 41
E-Mail: [email protected]
VG95328
Connectors
VG95328 R
Bayonet-Lock
Front Panel Mount Square Flange Receptacle
with Backshell for EMI Shield Termination and Shrink Boot
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
R
18-11
S
N
S - Socket
P - Pin
Connector
Style
L1
L5
L5
3.5
L2
+ 0.2
D1*
E
D3 D4 D5 D2 D6
L3
B
L4
TABLE I: DIMENSIONS
B
Max.
D1 *
Min.
E
± 0.15
L4
Max.
L5
+ 0.8
-0
L6
Max.
Maximum
Weight in
Grams
8
21.03
2.9
15.08
54
10.94
2.0
26
10
24.23
2.9
18.26
54
10.94
2.0
32
12
26.59
2.9
20.62
54
10.94
2.0
38
14
28.98
2.9
23.01
54
10.94
2.0
44
16
31.34
2.9
24.61
54
10.94
2.0
49
18
33.73
2.9
26.97
54
10.94
2.0
60
20
36.90
2.9
29.36
62
14.12
2.8
70
22
40.08
2.9
31.75
62
14.12
2.8
73
24
43.25
3.6
34.92
62
14.96
2.8
87
Shell size
For D2, D3, D4, D5, D6, L1,
L2, and L3 Dimensions
Please See VG95328 M
1
* Through Mounting Holes
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 42
E-Mail: [email protected]
VG95328
Connectors
VG95328 R
Bayonet-Lock
Front Panel Mount Square Flange Receptacle
with Backshell for EMI Shield Termination and Shrink Boot
Contact Arrangements
Alternate Insert Orientations
Dim. contact size
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
3
12 - 10
I
14 - 5
II
14 - 12
I
14 - 15
I
14 - 19
I
19
16 - 8
II
16 - 23
I
22
16 - 26
I
26
18 - 11
II
Degrees
Arrangement
16
W
X
8 - 3A
60
(120)
10 - 6
90
Y
12 - 3
10
Z
180
12 - 10
60
155
270
295
5
14 - 5
40
92
184
273
8
4
14 - 12
43
90
14
1
14 - 15
17
110
155
234
14 - 19
30
165
315
8
16 - 8
54
152
180
331
1
16 - 23
158
270
16 - 26
60
275
338
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
11
18 - 32
I
20 - 16
II
32
20 - 41
I
22 - 21
II
22 - 21
16
135
175
349
22 - 55
I
55
22 - 55
30
142
226
314
24 - 61
I
61
24 - 61
90
180
270
324
16
41
21
  
  
Normal
Position
.ORMAL
POSITION
.ORMAL
POSITION
.ORMAL
POSITION
Alternate Position
with Socket Contacts
Alternate Position
with Pin Contacts
!LTERNATE
POSITION
WITH
PIN
CONTACTS
!LTERNATE
POSITION
WITH
PIN
CONTACTS
!LTERNATE
POSITION
WITH
PIN
CONTACTS
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
!LTERNATE
POSITION
WITH
SOCKET
CONTACTS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
500 hour
Very Good
Very Good
See Page 13 for Panel Thickness and Cutout Dimensions
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 43
E-Mail: [email protected]
VG95328
Connectors
VG95328 S
Bayonet-Lock
Rear Panel Mount Jam Nut Receptacle Connector
with Shrinkboot Backshell
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
S
18-11
S
N
S - Socket
P - Pin
Connector
Style
L1
L3
L5
3.6 Max.
L2
D1 B2
D4
D3 D2
S
3.5 + 0.2
L6
L4
B1
TABLE I: DIMENSIONS
Shell size
B1
Max.
B2
+0
- 0.25
D1
D4
+0
- 0.8
L1
Max.
L3
+ 0.8
-0
L4
Min.
L5
± 0.5
L6
± 0.8
S
± 0.43
Maximum
Weight in
Grams
8
24.3
13.46
0.5625-24UNEF
27.3
43.0
17.5
9.75
3.0
12.6
19.05
20
10
27.4
16.46
0.6875-24UNEF
30.5
43.0
17.5
9.75
3.0
12.6
22.23
23
12
32.2
20.78
0.8750-20UNEF
35.3
43.0
17.5
9.75
3.0
12.6
26.97
30
14
35.4
23.93
1.0000-20UNEF
38.5
43.0
17.5
9.75
3.0
12.6
30.18
40
16
38.6
27.08
1.1250-18UNEF
41.6
45.5
17.5
9.75
3.0
12.6
33.32
50
18
41.7
30.25
1.2500-18UNEF
44.8
45.5
17.5
9.75
3.0
12.6
36.53
60
20
46.5
33.43
1.3750-18UNEF
49.6
53.5
22.3
11.32
3.8
13.7
39.67
80
22
49.7
36.60
1.5000-18UNEF
52.7
53.5
22.3
11.32
3.8
13.7
42.88
85
24
52.8
39.78
1.6250-18UNEF
55.9
53.5
23.1
12.16
3.8
14.0
46.02
90
Single Hole Mounting
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 44
E-Mail: [email protected]
VG95328
Connectors
VG95328 S
Bayonet-Lock
Rear Panel Mount Jam Nut Receptacle Connector
with Shrinkboot Backshell
Contact Arrangements
Alternate Insert Orientations
Dim. contact size
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
3
12 - 10
I
14 - 5
II
14 - 12
I
14 - 15
I
14 - 19
I
19
16 - 8
II
16 - 23
I
22
16 - 26
I
26
18 - 11
II
Degrees
Arrangement
16
W
X
8 - 3A
60
(120)
10 - 6
90
12 - 3
10
Y
Z
180
12 - 10
60
155
270
295
5
14 - 5
40
92
184
273
8
4
14 - 12
43
90
14
1
14 - 15
17
110
155
234
14 - 19
30
165
315
8
16 - 8
54
152
180
331
1
16 - 23
158
270
16 - 26
60
275
338
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
11
18 - 32
I
20 - 16
II
32
20 - 41
I
22 - 21
II
22 - 21
16
135
175
349
22 - 55
I
55
22 - 55
30
142
226
314
24 - 61
I
61
24 - 61
90
180
270
324
16
41
21
α
α
Alternate Position
with Pin Contacts
Normal
Position
Alternate Position with
Socket Contacts
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
See Page 13 for Panel Thickness and Cutout Dimensions
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 45
E-Mail: [email protected]
VG95328
Connectors
VG95328 T
Bayonet-Lock
Rear Panel Mount Jam Nut Receptacle
with Backshell for EMI Shield Termination and Shrink Boot
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
T
18-11
L1
L6
3.5
L2
D1 B2
D7
D3 D4 D5 D2
S
L3
1
B1
L7
TABLE I: DIMENSIONS
Shell
size
B1
Max.
B2
+0
- 0.25
D1
D7
+0
- 0.8
L4
+ 0.8
-0
L5
Min.
L6
± 0.5
L7
± 0.8
S
±0.43
Maximum
Weight in
Grams
8
24.3
13.46
.5625 - 24 UNEF
27.3
17.5
9.75
3.0
12.6
19.05
30
10
27.4
16.64
.6875 - 24 UNEF
30.5
17.5
9.75
3.0
12.6
22.23
35
12
32.2
20.78
.8750 - 20 UNEF
35.3
17.5
9.75
3.0
12.6
26.97
45
14
35.4
23.93
1.0000 - 20 UNEF
38.5
17.5
9.75
3.0
12.6
30.18
55
16
38.6
27.08
1.1250 - 18 UNEF
41.6
17.5
9.75
3.0
12.6
33.32
65
18
41.7
30.25
1.2500 - 18 UNEF
44.8
17.5
9.75
3.0
12.6
36.53
80
20
46.5
33.43
1.3750 - 18 UNEF
49.6
22.3
11.32
3.8
13.7
39.67
105
22
49.7
36.60
1.5000 - 18 UNEF
52.7
22.3
11.32
3.8
13.7
42.88
115
24
52.8
39.78
1.6250 - 18 UNEF
55.9
23.1
12.16
3.8
14.0
46.02
125
For D2, D3, D4, D5, D6, L1,
L2, and L3 Dimensions
Please See VG95328 M
L5
N
S - Socket
P - Pin
Connector
Style
L4
3.6 Max.
S
Single Hole Mounting
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 46
E-Mail: [email protected]
VG95328
Connectors
VG95328 T
Bayonet-Lock
Rear Panel Mount Jam Nut Receptacle
with Backshell for EMI Shield Termination and Shrink Boot
Contact Arrangements
Alternate Insert Orientations
Dim. contact size
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
3
12 - 10
I
14 - 5
II
14 - 12
I
14 - 15
14 - 19
16 - 8
II
16 - 23
I
22
16 - 26
I
26
18 - 11
II
18 - 32
I
20 - 16
II
20 - 41
I
22 - 21
II
22 - 55
I
55
24 - 61
I
61
Degrees
Arrangement
16
W
X
8 - 3A
60
(120)
10 - 6
90
Y
12 - 3
10
Z
180
12 - 10
60
155
270
295
5
14 - 5
40
92
184
273
8
4
14 - 12
43
90
I
14
1
14 - 15
17
110
155
234
I
19
14 - 19
30
165
315
180
331
8
16 - 8
54
152
1
16 - 23
158
270
16 - 26
60
275
338
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
22 - 55
30
142
226
314
24 - 61
90
180
270
324
11
32
16
41
21
α
α
Alternate Position
with Pin Contacts
Normal
Position
Alternate Position with
Socket Contacts
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
See Page 13 for Panel Thickness and Cutout Dimensions
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 47
E-Mail: [email protected]
VG95328
Connectors
VG95328 U
Bayonet-Lock
Straight Plug Connector with Thumb-Lock Lever,
Grounding-Fingers and EMI/Shrinkboot Backshell
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
U
18-11
S
N
S - Socket
P - Pin
Connector
Style
32 Max
34 ±1
L2
2.5 Min
H
D3 D4 D5 D2
0.4 Min
3.5 ±0.1
1
D1
L3
L1
TABLE I: DIMENSIONS
Shell
Size
D1
±1
H
±1
Maximum
Weight in
Grams
12
24
19
18
14
28
20
20
16
31
21
22
For D2, D3, D4, D5, L1, L2,
and L3 Dimensions
Please See VG95328 M
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 48
E-Mail: [email protected]
VG95328
Connectors
VG95328 U
Bayonet-Lock
Straight Plug Connector with Thumb-Lock Lever,
Grounding-Fingers and EMI/Shrinkboot Backshell
Contact Arrangements
Alternate Insert Orientations
Dim. contact size
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
12 - 10
I
Arrangement
16
3
Degrees
W
X
8 - 3A
60
(120)
10 - 6
90
12 - 3
10
Y
Z
180
12 - 10
60
155
270
295
184
273
234
14 - 5
II
5
14 - 5
40
92
14 - 12
I
8
4
14 - 12
43
90
14 - 15
I
14
1
14 - 15
17
110
155
14 - 19
I
19
14 - 19
30
165
315
16 - 8
II
8
16 - 8
54
152
180
331
16 - 23
I
22
1
16 - 23
158
270
16 - 26
I
26
16 - 26
60
275
338
18 - 11
II
18 - 32
I
20 - 16
II
20 - 41
I
22 - 21
II
22 - 55
I
24 - 61
I
11
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
55
22 - 55
30
142
226
314
61
24 - 61
90
180
270
324
32
16
41
21
α
α
Class L, U, and W Thumb-Lock
versions not qualified to VG95328.
Please consult factory for Glenair
commercial equivalent
VG95328 type
Thumb-Lock connectors
Alternate Position
with Pin Contacts
Normal
Position
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
© 2010 Glenair, Inc.
CAGE Code 06324
Alternate Position with
Socket Contacts
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 49
E-Mail: [email protected]
VG95328
Connectors
VG95328 V
Bayonet-Lock
Straight Plug Connector
with Ground-Fingers and EMI/Shrinkboot Backshell
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
V
18-11
S
N
S - Socket
P - Pin
Connector
Style
L2
D4
D2 D3
3.5 + 0.3
L1
D1
TABLE I: DIMENSIONS
Shell size
D1
Max.
D2
+ 0.15
-0
8
19.8
9.40
13.8
-2.00
10
23.5
12.60
16.6
12
26.5
15.75
19.8
14
30.0
18.40
16
33.1
21.60
18
35.3
20
38.8
22
24
© 2010 Glenair, Inc.
Limit
L1
Max.
L2
Min.
Maximum
Weight in
Grams
7.0
+2.5
23
6.5
14
-1.60
10.4
+2.1
23
6.5
16
-1.65
13.9
+1.7
23
6.5
23
23.0
-2.20
16.5
+2.2
23
6.5
30
26.2
-2.20
19.7
+2.1
23
6.5
43
24.40
29.0
-2.20
22.3
+2.4
23
8.5
46
26.00
32.3
-2.30
25.5
+2.4
28
8.5
63
42.0
29.40
36.6
-2.20
28.7
+2.4
28
8.5
78
45.1
32.50
39.8
-3.30
31.8
+2.5
28
8.5
84
D3
D4
Limit
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 50
E-Mail: [email protected]
VG95328
Connectors
VG95328 V
Bayonet-Lock
Straight Plug Connector
with Ground-Fingers and EMI/Shrinkboot Backshell
Contact Arrangements
Alternate Insert Orientations
Dim. contact size
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
12 - 10
I
Degrees
Arrangement
16
3
W
X
8 - 3A
60
(120)
10 - 6
90
12 - 3
10
Y
Z
180
12 - 10
60
155
270
295
184
273
234
14 - 5
II
5
14 - 5
40
92
14 - 12
I
8
4
14 - 12
43
90
14 - 15
I
14
1
14 - 15
17
110
155
14 - 19
I
19
14 - 19
30
165
315
16 - 8
II
8
16 - 8
54
152
180
331
16 - 23
I
22
1
16 - 23
158
270
16 - 26
I
26
16 - 26
60
275
338
18 - 11
II
18 - 32
I
20 - 16
II
20 - 41
I
22 - 21
II
22 - 55
I
24 - 61
I
11
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
55
22 - 55
30
142
226
314
61
24 - 61
90
180
270
324
32
16
41
21
α
α
Alternate Position
with Pin Contacts
Normal
Position
Alternate Position with
Socket Contacts
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
© 2010 Glenair, Inc.
CAGE Code 06324
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 51
E-Mail: [email protected]
VG95328
Connectors
VG95328 W
Bayonet-Lock
Straight Plug Connector with Thumb-Lock Lever,
Grounding-Fingers and EMI/Shrinkboot Backshell
Alternate Insert
Rotation
W, X, Y or Z
(N = Normal)
Shell Size and
Insert
Arrangements
VG95328
W
18-11
S
N
S - Socket
P - Pin
Connector
Style
34 ±1
33 Max
25 Min
H
D2
D3
1.2 - 0.1
3.5 ±0.3
6.5
23 Max
D1
TABLE I: DIMENSIONS
© 2010 Glenair, Inc.
D3
± 0.5
H
±1
Maximum
Weight in
Grams
-1.65
18
16
23.0
-2.20
20
18
26.2
-2.20
21
20
Shell
Size
D1
±1
D2
± 0.5
12
24
14.0
19.8
14
28
17.1
16
31
20.3
Limit
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 52
E-Mail: [email protected]
VG95328
Connectors
VG95328 W
Bayonet-Lock
Straight Plug Connector with Thumb-Lock Lever,
Grounding-Fingers and EMI/Shrinkboot Backshell
Contact Arrangements
Alternate Insert Orientations
Dim. contact size
Arrangement
Cl. Isol.
Rating
20
8 - 3A
I
3
10 - 6
I
6
12 - 3
II
12 - 10
I
Arrangement
16
3
Degrees
W
X
8 - 3A
60
(120)
10 - 6
90
12 - 3
10
Y
Z
180
12 - 10
60
155
270
295
184
273
234
14 - 5
II
5
14 - 5
40
92
14 - 12
I
8
4
14 - 12
43
90
14 - 15
I
14
1
14 - 15
17
110
155
14 - 19
I
19
14 - 19
30
165
315
16 - 8
II
8
16 - 8
54
152
180
331
16 - 23
I
22
1
16 - 23
158
270
16 - 26
I
26
16 - 26
60
275
338
18 - 11
II
18 - 32
I
20 - 16
II
20 - 41
I
22 - 21
II
22 - 55
I
24 - 61
I
11
18 - 11
62
119
241
340
18 - 32
85
138
222
265
20 - 16
238
318
333
347
20 - 41
45
126
225
22 - 21
16
135
175
349
55
22 - 55
30
142
226
314
61
24 - 61
90
180
270
324
32
16
41
21
α
α
Class L, U, and W Thumb-Lock
versions not qualified to VG95328.
Please consult factory for Glenair
commercial equivalent
VG95328 type
Thumb-Lock connectors
Alternate Position
with Pin Contacts
Normal
Position
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
(Chloroprene): -55°C/+125°C
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Gold Plating Over Nickel
© 2010 Glenair, Inc.
CAGE Code 06324
Alternate Position with
Socket Contacts
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 53
E-Mail: [email protected]
VG95328
Accessoreis
VG95328 Z1 A, B, and C
Receptacle Covers for Panel Attachment
For Connectors A to H and P, R, S and T Only
VG95328
Z1
A
Receptacle
Cover
Lanyard Style
A = Chain with
Eyelet
B = Rope with
Eyelet
C = Rope Sans
Eyelet
L1
2.4 Max
L2
18
L3
Shell Size
0.8
7 +3
Ø4
D1
5.5 ±0.3
L4
L5
3
400 +20
L5
19
4.2
2 ±0.2
Z1 C
Z1 A
4.1 +0.5
7 +2
Z1 B
TABLE I: DIMENSIONS
© 2010 Glenair, Inc.
Shell size
D1
Max.
L1
Max.
L2
Max.
L3
+ 0.25
- 0.38
L4
Max.
L5
+ 13
-7
Maximum
Weight in
Grams
8
18.7
21.5
14.3
2.92
3.78
77
17
10
21.9
21.5
14.3
2.92
3.78
77
17
12
25.4
21.5
14.3
2.92
3.78
89
25
14
28.6
21.5
14.3
2.92
3.78
89
25
16
31.8
21.5
14.3
2.92
3.78
89
29
18
35.0
21.5
14.3
2.92
3.78
89
29
20
38.1
21.5
14.3
2.92
3.78
102
33
22
41.3
21.5
14.3
2.92
3.78
102
36
24
44.5
22.3
15.3
3.73
2.21
102
42
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 54
E-Mail: [email protected]
VG95328
Accessoreis
VG95328 Z2 A, B, and C
Plug Covers for Panel Attachment
For Connectors J to N and U, V and W Only
VG95328
Z2
Plug
Cover
L1
L2
2.4 Max
L4
A
18
Lanyard Style
A = Chain with
Eyelet
B = Rope with
Eyelet
C = Rope Sans
Eyelet
Shell Size
0.8
7 +3
Ø4
D1
5.5 ±0.3
L3
L5
3
400 +20
L5
19
4.2
Z2 A
2 ±0.2
Z2 C
Z2 B
4.1 +0.5
7 +2
TABLE I: DIMENSIONS
© 2010 Glenair, Inc.
Shell size
D1
Max.
L1
Max.
L2
Max.
L3
+ 0.8
-0
L4
+ 0.25
- 0.5
L5
+ 13
-7
Maximum
Weight in
Grams
8
18.3
19.9
14.3
9.35
8.3
77
17
10
21.5
19.9
14.3
9.35
8.3
77
17
12
25.4
19.9
14.3
9.35
8.3
89
21
14
28.6
19.9
14.3
9.35
8.3
89
24
16
31.8
19.9
14.3
9.35
8.3
89
27
18
35.0
19.9
14.3
9.35
8.3
89
31
20
38.1
21.5
15.9
10.92
9.9
102
36
22
41.3
21.5
15.9
10.92
9.9
102
40
24
44.5
22.3
16.7
11.76
9.9
102
43
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 55
E-Mail: [email protected]
VG95328
Accessoreis
VG95328 Z3 C
Receptacle Cover For Cable Attachment
For Connectors D, E, F, S and T Only
VG95328
Z3
Receptacle
Cover
C
18
Lanyard Style
C = Rope with
Connector Ring
Shell Size
L1
L2
2.4 Max
L3
D1
100 +20
B
L4
D3
D2
TABLE I: DIMENSIONS
Shell size
B
Min.
D2
Min.
D3
Max.
Maximum
Weight in
Grams
8
5.94
14.68
20.62
17
10
5.94
17.86
25.40
17
12
5.94
22.63
30.18
25
14
5.94
25.81
36.53
25
16
5.94
28.98
39.67
29
18
5.94
32.16
42.88
29
20
5.94
35.33
46.02
33
22
5.94
38.51
49.23
36
24
5.94
41.68
52.37
42
L1, L2, L3, L4 and D1 dimensions: See Page 54
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 56
E-Mail: [email protected]
VG95328
Accessoreis
VG95328 T07 A and B
Conductive and Non-Conductive Gaskets
For Connectors A, B, C, H, P and R Only
Shell Size
VG95328
T07
Panel
Mounted
Accessories
0.8 ±0.3
E
A
18
Gasket Style
A = Non-Conductive
B = Conductive
E
D1
D1
0.8 ±0.3
D2
B
D2
B
VG95328 T07 A
Non-Conductive
VG95328 T07 B
Conductive
TABLE I: DIMENSIONS
© 2010 Glenair, Inc.
Shell size
B
Max.
D1
+1
-0
D2
Min.
E
± 0.3
Maximum
Weight in
Grams
8
22.7
12.7
3.1
15.1
2
10
25.8
15.9
3.1
18.3
2
12
28.2
19.0
3.1
20.6
2
14
30.6
22.2
3.1
23.0
2
16
33.0
25.4
3.1
24.6
2
18
35.4
28.6
3.1
27.0
2
20
38.5
31.7
3.1
29.4
2
22
41.7
34.9
3.1
31.8
2
24
44.9
38.1
4.2
34.9
2
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 57
E-Mail: [email protected]
VG95328
Accessoreis
VG95328 T07 C
Dummy Stowage Receptacle
Closed Back
Shell Size
VG95328
T07
Panel
Mounted
Accessories
C
Dummy Stowage
Receptacle
C = Closed Back
E
D2
L3
L2
18
B
TABLE I: DIMENSIONS
© 2010 Glenair, Inc.
Shell size
B
Max.
D2
Min.
E
± 0.15
L2
Max.
L3
Max.
Maximum
Weight in
Grams
8
21.03
2.9
15.08
12.5
2.0
8
10
24.23
2.9
18.26
12.5
2.0
10
12
26.59
2.9
20.62
12.5
2.0
12
14
28.98
2.9
23.01
12.5
2.0
14
16
31.34
2.9
24.61
12.5
2.0
16
18
33.73
2.9
26.97
12.5
2.0
18
20
36.90
2.9
29.36
15.0
2.8
20
22
40.08
2.9
31.75
15.0
2.8
25
24
43.25
3.6
34.92
15.0
2.8
30
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 58
E-Mail: [email protected]
VG95328
Accessoreis
VG95328 T07 D
Dummy Stowage Receptacle
Open Back
Shell Size
VG95328
T07
Panel
Mounted
Accessories
L2
D
Dummy Stowage
Receptacle
D = Open Back
D2
L3
18
E
L4
B
TABLE I: DIMENSIONS
Shell size
B
Max.
D2
Min.
D3
+ 0.8
- 0.6
E
± 0.15
L2
Max.
L3
Max.
L4
Max.
Maximum
Weight in
Grams
8
21.03
2.9
11.2
15.08
10.94
2.0
24.3
6
10
24.23
2.9
14.3
18.26
10.94
2.0
24.3
7
12
26.59
2.9
17.5
20.62
10.94
2.0
24.3
10
14
28.98
2.9
20.7
23.01
10.94
2.0
24.3
12
16
31.34
2.9
23.9
24.61
10.94
2.0
24.3
14
18
33.73
2.9
27.0
26.97
10.94
2.0
24.3
17
20
36.90
2.9
30.2
29.36
14.12
2.6
28.3
21
22
40.08
2.9
33.4
31.75
14.12
2.6
28.3
25
24
43.25
3.6
36.6
34.92
14.96
2.6
28.9
27
© 2010 Glenair, Inc.
CAGE Code 06324
Printed in Italy
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 59
E-Mail: [email protected]
To Most People
It’s Just a Connector
M
To Glenair
It’s a Promise
ost customers have a simple expectation
when they go shopping for safety-critical
interconnect components: They want fast and
accurate service. Glenair addresses this most
basic customer requirement in several different
ways. First and foremost, by providing immediate access to our technical information and
product documentation: whether you prefer an
office visit, the telephone, the Internet, a CD or a
printed catalog, Glenair is ready with answers to
your most complex questions and design challanges. Secondly, Glenair stocks thousands
of popular catalog products for those situations
when even a two or three week lead-time is just
too long. We stock over 65,000 interconnect
components—bagged and tagged and ready for
immediate shipment. And for those situations
when a customized solution is required, our
engineers are fully versed in all aspects of interconnect system design: from shielding against
EMI, to reducing weight and connector package
size, to stopping corrosion and other forms of
environmental damage.
You have a simple expectation: fast and
accurate service. At Glenair, we’re ready to give
you exactly that. It’s a promise.
1211 Air Way
Glendale, California 91201-2497
Telephone: 818-247-6000 · Facsimilie: 818-500-9912 · EMail: [email protected]
United States · United Kingdom · Germany · Nordic · France · Italy · Spain · J a p a n
www.glenair.com
The world's broadest
selection of interconnect
products–in stock and
ready for immediate
same-day shipment
Glenair's World
of Interconnect
Solutions
Interconnect
Product
Guide CD,
featuring our
entire library
of Glenair
catalogs and
data sheets.
In addition to over a dozen product line
catalogs, the CD includes a powerful part
number development program that takes all the
pain and confusion out of ordering interconnect
components. An easy-to-use inventory search
program provides ready access to 60,000 MILSTD and commercial part numbers.
A complete overview of Glenair's
innovative range of interconnect
products and services, including
Military Standard and commercial
equivalent connectors and
accessories.
Micro-D Twistpin
Connectors and
Accessories
Glenair offers both Military
Standard 83513 Micro-D connectors
as well as COTS selections,
backshells, mounting hardware and
more. Our TwistPin contact provides
superior performance.
Available now:
Glenair's
Composite Thermoplastic
Interconnect Solutions
EMI Solutions
Page B-8
TwistPin
Connectors and
Accessories
Micro-D • Nanominiature
United States
„
United Kingdom
„
Germany
„
France
„
Nordic
„
Italy
„
Spain
„
Japan
Glenair is the world's leading
manufacturer of composite
interconnect solutions. We are
the ‘go-to’ supplier for advanced
composite technologies for
commerical and military interconnect
applications.
EMI/EMP Filter
Connectors
Miliary Standard
Connector Accessories
MIL-DTL-38999 type EMI/
EMP filter connectors, as well
as other Military Standard and
commercial electromagnetic
shielding technologies. Also
includes Glenair Series 80 “Mighty
Mouse” filter products.
If the MS connector accessory you
need isn’t in here – it doesn’t exist.
Search this easy-to-use catalog
by accessory type or Mil-Spec
slash number, then place your
order against Glenair’s 60,000 part
number same-day inventory.
EMI/EMP
Filter Connectors
MIL-DTL-38999, MIL-DTL-83513, MIL-C-26482
and Other Military Standard Connector Families.
Plus Glenair Series 80 "Mighty Mouse" Designs
U n i t e d
S t a t e s „ U n i t e d
K i n g d o m „ G e r m a n y „ F r a n c e „ N o r d i c „ I t a l y „ Spain
„ Japan
Fiber Optic
Interconnect Solutions
Series 80 “Mighty Mouse”
Connectors and Cables
Tactical fiber optic connectors,
cables, and termini for airframe,
shipboard, and military ground
vehicles. Catalog features Glenair’s
innovative high-density (GHD)
connector system for reduced size
and weight applications.
Glenair’s revolutionary connector
series that reduces interconnect
system size and weight by 50%
compared to standard MIL-DTL38999 connectors. Now used on
hundreds of mission-critical military
and commercial applications.
Fiber Optic
Interconnect Solutions
Tactical Fiber Optic Connectors, Cables and Termini
U nited
States „ U nited
K i ngd om „ G e r m a n y „ F r a nc e „ N o r d i c „ I t a ly „ Spain „ Japan
Mil-Spec
Backshells and
Connector Accessories
U n i t e d
S t a t e s
„
U n i t e d
K i n g d o m
„
G e r m a n y
„
F r a n c e
„
N o r d i c
„
I t a l y
S p a i n
„
Series 80
“Mighty Mouse”
Connectors and Cables
The Shielded Environmental Connector with
Mil-Spec Performance and Ultraminiature Size
United States
„
United Kingdom
„
Germany
Visit us at www.glenair.com and use the literature order form for immediate catalog fulfillment
„
France
„
Nordic
„
Italy
„
Spain
„
Japan
A World of
Interconnect
Solutions
Glenair, Inc.
1211 Air Way • Glendale, California • 91201-2497
Telephone: 818-247-6000 • Fax: 818-500-9912 • [email protected]
www.glenair.com
Telephone:
Glenair Industrial Power and
203-741-1115
Signal Connector Group
Facsimile:
25 Village Lane
203-741-0053
Wallingford, CT
[email protected]
06492
Glenair UK Ltd
40 Lower Oakham Way
Oakham Business Park
P.O. Box 37, Mansfield
Notts, NG18 5BY England
Glenair Microway Systems
7000 North Lawndale Avenue
Lincolnwood, IL
60712
Glenair Nordic AB
Gustav III : S Boulevard 46
S - 169 27 Solna
Sweden
Glenair Electric GmbH
Siemensstrasse 9
D-61449 Steinbach
Germany
Telephone:
847-679-8833
Facsimile:
847-679-8849
Telephone:
49-6171-5905-0
Facsimile:
49-6171-5905-90
[email protected]
Telephone:
Glenair Italia S.p.A.
+39-051-780098
Via Cà dell’Orbo Nord, 22
Facsimile:
40055 Villanova di Castenaso
+39-051-782259
Bologna, Italy
[email protected]
© 2011 Glenair, Inc.
Printed in Italy
Glenair Iberica
C/ La Vega, 16
45612 Velada
Spain
Glenair France SARL
7, Avenue Parmentier
Immeuble Central Parc #2
31200 Toulouse
France
Telephone:
44-1623-638100
Facsimile:
44-1623-638111
[email protected]
Telephone:
46-8-50550000
Facsimile:
46-8-50550001
[email protected]
Telephone:
34-925-89-29-88
Facsimile:
34-925-89-29-87
[email protected]
Telephone:
33-5-34-40-97-40
Facsimile:
33-5-61-47-86-10
[email protected]