MIL-C-83733 Backshells 507-062 EMI/RFI Backshell With Lamp Thread Type Split Strain-Relief for MIL-C-83733 Connectors 507-062 M B A06 B03 E05 F04 E Basic Part No. E = Strain Relief, Omit for Gland Nut Finish (Table III) Entry Location (A, B, C, D, E, F) and Dash No. (Table II) - See Note 2 Shell Size (Table I) G 1. Metric dimensions (mm) are indicated in parentheses. 2. When entry options “C” and/or “D” are selected, entry option “B” cannot be selected. When “C” and “D” are selected on shell size A, the maximum dash number available is 02. 3. Material/Finish: Backshell, Adapter, Clamp, Ferrule = Al Alloy/See Table III Hardware = SST/Passivate “C” Entry Cable Entry E .62 (15.8) F 1.38 (35.1) Max “B” Entry 2.00 (50.8) “D” Entry “A” Entry “E” Entry C B D “F” Entry A TABLE III: FINISHES TABLE I: DIMENSIONS B A Shell Dim Dim Size A 2.095 (53.2) 1.000 (25.4) B 3.395 (86.2) 1.000 (25.4) C D ± .005 (.1) ± .005 (.1) 1.895 (48.1) .815 (20.7) 3.195 (81.2) .815 (20.7) Max Entry .750 (19.1) .750 (19.1) TABLE II: CABLE ENTRY E Dash Max No. 01 .510 (13.0) 02 .577 (14.7) 03 .702 (17.8) 04 .827 (21.0) 05 .982 (24.9) 06 1.077 (27.4) © 2004 Glenair, Inc. F Entry Max .078 (2.0) .203 (5.2) .328 (8.3) .453 (11.5) .578 (14.7) .703 (17.9) G Max .78 (19.8) .97 (24.6) 1.05 (26.7) 1.16 (29.5) 1.22 (31.0) 1.34 (34.0) Cable Entry Min Max .062 (1.6) .125 (3.2) .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .250 (6.4) .500 (12.7) .375 (9.5) .625 (15.9) .500 (12.7) .750 (19.1) CAGE Code 06324 Sym. Finish B Cadmium Plate, Olive Drab M Electroless Nickel N Cadmium Plate, Olive Drab, Over Nickel NF Cadmium Plate, Olive Drab, Over Electroless Nickel (500 Hour Salt Spray) CONSULT FACTORY FOR OTHER AVAILABLE FINISHES Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] E-3