MIL-C-24308 D-Subminiature 557-110 EMI/RFI D-Subminiature Solid Backshell for Individual and Overall Shielding with Strain-Relief 557 T 110 M 2 F 02 C C = Supplied With Retainer Clips and Jackscrews, Omit for None Basic Part No. Cable Entry Style T = Top S = Side E = End Cable Entry Dash No. (Table II) F = Strain Relief G = Gland Nut Basic Part Number H Typ. Shell Size (Table I) Finish Symbol (Page 3) Cable Range Typ. Ferrule I.D. Typ. S Side Entry E End Entry Style F Strain Relief 1.25 (31.8) Max Typ. J E T End Entry Style G Gland Nut Connector Shown for Ref. Only (Typ.) .425 (10.8) D Typ. F Typ. B Typ. TABLE II: CABLE ENTRY J Max .781 (19.8) .906 (23.0) 1.031 (26.2) 1.156 (29.4) C A Typ. 4-40 UNC-2A “C” OPTION HARDWARE Glenair part number 687-236 H Dash Max No. .968 (24.6) 02 1.046 (26.6) 03 1.156 (29.4) 04 1.218 (30.9) 05 .25 (6.4) Typ. Cable Range Min Max .125 (3.2) .250 (6.4) .250 (6.4) .375 (9.5) .312 (7.9) .500 (12.7) .375 (9.5) .625 (15.9) Ferrule I.D. .125 (3.2) .250 (6.4) .375 (9.5) .500 (12.7) Tapped for 4-40 UNC-2B (2 places). When C option is ordered, two cleared holes are supplied. Metric dimensions (mm) are indicated in parentheses. TABLE I: CONNECTOR/SHELL INTERFACE & BACKSHELL DIMENSIONS Shell Com’l Shell Size Ref Size E/09 1 A/15 2 B/25 3 C/37 4 D/50 5 F/104 6 © 2004 Glenair, Inc. D A 1.25 (31.8) 1.58 (40.1) 2.13 (54.1) 2.77 (70.4) 2.68 (68.1) 2.77 (70.4) .53 .53 .53 .53 .66 .73 B (13.5) (13.5) (13.5) (13.5) (16.8) (18.5) .75 .75 1.00 1.00 1.25 1.25 C (19.1) (19.1) (25.4) (25.4) (31.8) (31.8) ±.005 .984 1.312 1.852 2.500 2.406 2.500 CAGE Code 06324 (.1) (25.0) (33.3) (47.0) (63.5) (61.1) (63.5) 1.88 1.88 1.88 1.88 2.13 2.13 E (47.8) (47.8) (47.8) (47.8) (54.1) (54.1) .43 .43 .43 .43 .56 .63 Max Dash F No. Table II (10.9) 04 (10.9) 04 (10.9) 04 04 (10.9) 04 (14.2) (16.0) 05 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-50