ITT T102J6V3GE2

C&K T Series
Subminiature Rocker Switches
Features/Benefits
• Compact size—small footprint
• Single and double pole models
• PC and panel mounting options available
• RoHS compliant
Typical Applications
• Telecommunications
• Instrumentation
• Medical Equipment
Models Available
Specifications
Materials
CONTACT RATING: Q contact material (TX01 models): 3 AMPS @
120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or
28 V DC. See page H-53 for additional ratings.
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or
diallyl phthalate (DAP), (UL 94V-0).
ELECTRICAL LIFE: TX01 models: 60,000 make-and-break
cycles at full load. All other models: 30,000 cycles.
BUSHING: Brass, nickel plated.
CONTACT RESISTANCE: Below 20 m Ω typ. initial @
2–4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
ACTUATOR: Nylon, black standard.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass, matte-tin plated.
MOUNTING BRACKET: Stainless steel.
END CONTACTS: B contact material: Copper alloy, with gold plate
over nickel plate. Q contact material: Coin silver, silver plated.
See page H-53 for additional contact materials.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
CENTER CONTACTS & TERMINALS: B contact material: Copper alloy,
with gold plate over nickel plate. Q contact material: Copper alloy,
silver plated. See page H-53 for additional contact materials.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.
For the latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
TERMINAL SEAL: Epoxy.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
HARDWARE: Nut, Screws & Lockwasher: Stainless steel.
Standoff: Nylon standard.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages H-47 through H-52. For additional options not shown in catalog, consult Customer Service Center.
All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Rocker
Switch Function
T101 SP On-None-On
T102 SP Off-None-On
T103 SP On-Off-On
T105 SP Mom.-Off-Mom.
T107 SP On-Off-Mom.
T201 DP On-None-On
T205 DP Mom.-Off-Mom.
Actuator
J1 Rocker, .300" wide
J6 Rocker, .230" wide
Terminations
A Right angle, PC thru-hole
AV Vertical Right angle, PC thru-hole
Z Solder lug
Contact Material
V3 V-bracket
B Gold
K Gold, tin-lead
P Gold, matte-tin
Q Silver
G Gold over silver
Seal
E Epoxy
Actuator Color
2 Black
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
H–47
www.ittcannon.com
C&K T Series
Subminiature Rocker Switches
ACTUATOR COLOR
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1
NO.
POLES
MODEL
NO.
POS. 2
CONNECTED TERMINALS
POS. 3
POS. 1
C&K marking on opposite side
T101
ON
NONE
ON
T103
ON
OFF
ON
T105
MOM.
OFF
MOM.
T107
ON
OFF
MOM.
POS. 2
C&K marking on opposite side
T102
OFF
NONE
ON
SCHEMATIC
N/A
2-3
SP
POS. 3
2-1
OPEN
SPDT
OPEN
N/A
3-1
SPST
SPDT
PANEL MOUNTING
Terminal Nos.
For Reference Only
Part number shown: T101J1ZBE2
T201
ON
NONE
ON
T205
MOM.
OFF
MOM.
DP
N/A
2-3,5-6
2-1,5-4
OPEN
DPDT
DPDT
PANEL MOUNTING
Part number shown: T201J1ZBE2
Terminal Nos.
For Reference Only
MOM. = Momentary
All models
with all options when ordered with G or Q contact material.
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H–48
www.ittcannon.com
H
C&K T Series
Subminiature Rocker Switches
ACTUATOR
ACTUATOR
J1
ROCKER, .300 WIDE
OPTION
CODE
2
BLACK
Actuators available separately, see page H 51H53. Finish: Matte. Other colors, custom actuator markings and legends available, consult
Customer Service Center.
Standard with all models except T10X with A terminations.
J6
ACTUATOR
COLOR
ROCKER, .230 WIDE
Standard with T10X model with A terminations.
TERMINATIONS
Z
SOLDER LUG
SP
SP and DP
A
DP
Not available with K or P contact material.
RIGHT ANGLE, PC THRU-HOLE
Rocker
PC MOUNTING
T101J6ABE2
Horizontal Actuation
SPDT
Not available with T102 model. J6 actuator standard only
on T10X models with A terminations.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
H–49
www.ittcannon.com
C&K T Series
Subminiature Rocker Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
T201J1ABE2
Horizontal Actuation
DPDT
AV
VERTICAL RIGHT ANGLE, PC THRU-HOLE
T101J1AVBE2
Vertical Actuation
SPDT
AV
NOTE: Terminal bend radii and lead-in manufacturing option.
VERTICAL RIGHT ANGLE, PC THRU-HOLE
T201J1AVBE2
Vertical Actuation
DPDT
V3
NOTE: Terminal bend radii and lead-in manufacturing option.
VERTICAL MOUNT, V-BRACKET
Rocker
T101J1V3BE2
SPDT
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H–50
www.ittcannon.com
H
C&K T Series
Subminiature Rocker Switches
TERMINATIONS
V3
VERTICAL MOUNT, V-BRACKET
T201J1V3BE2
DPDT
CONTACT MATERIAL
OPTION
CODE
B
RoHS
RoHS
COMPLIANT * COMPATIBLE *
YES
CONTACT
MATERIAL
TERMINAL
PLATING
RATINGS
GOLD 1
YES
GOLD 3
LOW LEVEL/
TIN-LEAD 6
K
NO
YES
P
YES
YES
Q
YES
YES
SILVER 4,5
SILVER 5
POWER
G
YES
YES
GOLD OVER
SILVER 2,3
GOLD 3
LOW LEVEL/DRY
0.4 VA MAX. @ 20 V AC OR DC MAX.
DRY CIRCUIT
MATTE-TIN 7
CIRCUIT OR POWER
TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC.
ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC.
TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR
3 AMPS @ 120 V AC OR 28 V DC.
ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR
2 AMPS @ 120 V AC OR 28 V DC.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2 END CONTACTS: Coin silver, with gold plate over nickel plate.
3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4 END CONTACTS: Coin silver, silver plated.
5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
6 TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
NOTE: Any models supplied with Q, B, G & P contact material are RoHS compliant.
For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
All models
with all options when ordered with G, or Q contact material.
B contact material standard with A, AV, V3 terminations.
Q contact material standard with C & Z terminations.
K & P contact materials not available with Z terminations.
7 TERMINALS: Copper alloy, with matte-tin over nickel plate.
SEAL
EPOXY SEAL
Rocker
E
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H
H–51
www.ittcannon.com
C&K T Series
Subminiature Rocker Switches
AVAILABLE HARDWARE
Panel mounting hardware for rocker and lever handle switches is
available separately. Mounting hardware consists of two screws,
two nuts, two standoffs and two lockwashers per switch, and is
available for panel thicknesses of 1/16, 3/32 and 1/8 inch.
See part numbers below.
TYPICAL ASSEMBLY
SCREW
PANEL THICKNESS
STAND-OFF
LENGTH
STAND-OFF
LOCKWASHER
NUT
PART NO.
PANEL THK.
STANDOFF LENGTH
761101000
1/16 IN. (1,59)
.295 (7,49)
761102000
3/32 IN. (2,38)
.264 (6,71)
761103000
1/8 IN. (3,18)
.233 (5,92)
NOTE: Additional nuts, screws and lockwashers available
separately, see Technical Data section of this catalog.
J1 Actuator
J6 Actuator
PART NO.
PART NO.
468002263 BLACK
468102263 BLACK
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
NOTE: Other colors, custom actuator markings and legends available,
consult Customer Service Center.
Rocker
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
H–52
www.ittcannon.com
H